Rubber Edge Trim, 1/16" U Channel Edge Trim, EPDM Edge Protector, Length 20Ft, U Shaped Gasket, Black Color, Edge Protector for Sheet Metal

Adds a good look to paneling and the mirrors, overcut the corners then trim to get a great edge.

Good quality and thickness. Was perfect for the sharp delta sink divider we had.

Worked great by bunting some sharp edges and a different kind of application, but it did

This isn’t good if you are using it for your viper cut on your Toyota 4Runner. The bumper is thinner than the 1/16” rubber. It will not stay on. I tried using a torch to try and mold the rubber, but it eventually falls off. The product itself is fine. Just not good for what I was intending to use it for.

To small for drum rim.

Silicon edge trim is very usable strong and supple for easy installation and good protection. I tested a piece with a utility knife and it takes some small effort to slice through it.

Although this product appears to be functional and would be acceptable in quality and color. The big problem is that the edge protection does not stay in place on its own (applied it to the car door) and within hours the product came off. To secure it in place there needs to be some form of adhesive to secure it in place. Likewise, some adhesives are not compatible with the material which I found out later. As such, I’ve returned the product for a complete refund. Best of luck if you purchase this product.

I originally purchased this channeling to provide a border edging on my utv’s windshield However, once it arrived and was unboxed, I was instantly mesmerized by the spiraling pattern of the channel inside its clear plastic inner pack. I am now faced with the dilemma of practicality vs art! I suspect the solution is to order another one for its intended purpose and reserve this one to hang on the wall in my bathroom opposite the throne, as a spiraling incentive piece of art! Awesome !

A bit too flimsy to stay in place, might need glue/tape which is not provided with the item.

I used this edging for a piece of hardware cloth to cover my engine when the car is parked, because a squirrel had been getting in and eating cones on top of the engine. Didn't want wire mesh to snag anything nor cut my hands taking it out, so I got this edging and chose silicone as the most heat tolerant material. I was able to attach strips of this U trim to all sides of the rectangular piece without any need for adhesive, just using a snip of wire at the corner ends bent back to pinch into place. It fits snugly and so far doesn't need any other attachment. The material is quite strong and thick but malleable enough for the sharp edges to also provide some grip. So I am quite satisfied with the product quality and has worked perfectly for this application.

péssimk

Fait une très belle finition pour le contour de miroir, vitres et posters de carton...etc etc !!!

Its hard to put on straight. Glue strip sticks to matl permanently and instantly. Edges aren't smooth. Lots of small cracks. Very soft. Too soft to ccushion an edge against a head bang