MANTO2 Pack Screen Protector for iPhone SE 3 (2022), iPhone SE 2020, iPhone 8, iPhone 7, iPhone 6S/6 Full Coverage Tempered Glass Screen Protector Film Edge to Edge Protection 4.7 Inch

I bought this Manto screen protector in Sep 2020 and applied it immediately to my new 2nd gen iPhone SE. The phone did not experience any drops until the last couple of months when it was subjected to three severe drops, the last in a parking lot. There were cracks already from the first, and by the last incident it seemed that the IPhone screen would need to be replaced. However, when I removed the protector just now to inspect the damage underneath, the iPhone screen was completely intact!I've applied the second protector that came in the box, and the iPhone looks new without a blemish - thank you Manto! I plan to order this item again to be ready for future mishaps.PS. Manto has thoughtfully provided all the tools needed (and in duplicate), and everything is meticulously packed and labeled. My only advice to the Chinese manufacturer would be to have someone proofread the instructions and other inserts so that the English is impeccable and easy to read.

Excellent product. Watch YouTube for best installation instructions!

When it comes to edge-to-edge screen protectors, your options are limited due to the curved surface of the iPhone 6-8 form factor. Manto is the only one to get.My 1st Manto screen protector broke earlier this week. I was using my phone to check if my monitor was level, and it slipped from my hand and fell roughly 3 feet screen-first onto the corner of my aluminum-framed mechanical keyboard. I'm a really careful person. I have never dropped my phone like that onto a hard surface in over a decade. So I was horrified when I turned the phone over and there was a crack. To my pleasant surprise, when I peeled off the screen protector, the screen was still in flawless condition.I've included a picture of the damage to the screen protector. And please note where the point of impact is - it was RIGHT ON THE EDGE of the screen protector. You can see all the other cracks spreading out from that point. If I had used any of those other screen protectors that do not go edge-to-edge, my phone would have taken the damage. I originally bought an edge-to-edge screen protector over the other kind mostly for aesthetic reasons, but I never thought protecting that extra bit on the edge would have made all the difference. I'm sold.The only thing that ever bothered me about the Manto was that a little bit of the screen was covered on the left and right sides. It wasn't much, but it did make me look for another brand when purchasing a replacement for the broken screen protector. I purchased the ESR edge-to-edge protector (2 pack). Big mistake. The cutouts were in the wrong spots, and neither of the 2 screen protectors in the pack would adhere properly. I immediately went back to Manto and I couldn't be happier. Flawless installation on the first try. I did have to scrub out a few bubbles, but they went away with a bit of force. Even though Manto does provide an alignment frame, I do not recommend using it. I personally have an easier time when I can simply grip the edges of the screen protector with the tips of my fingers and lower it down onto the screen. The alignment frame gets in the way of this so that you have to just drop the screen protector down and hope for the best.Finally, there's only 1 other minor problem (besides covering less than 0.5 mm on the left/right of the screen). The thickness of the screen protector means that the ambient light sensor on the front of the phone has trouble detecting light from any angle other than straight at it. This means automatic flash on the selfie cam will have a tendency to always activate flash. I'm not big on selfies and you can always turn off auto flash, so I have no qualms about this, but it is still worth mentioning.Other than that, the glass is really beautiful. Edges are rounded off and smooth to the touch. The surface repels water and oil very well so that they run straight off. I find myself just admiring the beauty of my phone again.

When I upgraded (of necessity) to a new iPhone SE 2020, I bought a tempered glass screen protector and case at the same time, as I didn’t want to risk damage to my new phone. I wondered that the screen protector didn’t seem to cover the whole screen, but learned that most of them were like that. Before I’d had it three weeks, one corner chipped off the screen protector, then another part chipped and a hairline crack grew from that. In order to replace it under warranty, I had to order it from the company—for an additional fee, on top of the excessive price I’d paid for it. And to add insult to injury, they didn’t have the kind I’d originally bought, so offered me, instead, an “upgrade”—to a model that was actually a downgrade; it normally costs half what the original model cost. I wasn’t about to throw more good money after bad. I chalked the loss up to experience and after some research found this Manto screen protector. I got two screen protectors for almost a third of what I’d paid for the inadequate first one, and this one really fits my screen. The package came with a separate installation kit for each protector, which made the installation quick, easy and bubble-free. As an added bonus, the glass is crystal clear, nicely sensitive and resists finger prints beautifully. I couldn’t be happier with it.Update: A few days ago, I knocked a pottery cup full of small grooming utensils from a high shelf right onto my phone on the counter below. The screen protector shattered--instead of the screen. It did exactly what it was supposed to do. The screen was completely undamaged. This was the second in my set of two (the first cracked from the edge for some other reason, but I'd had it for quite awhile.) I immediately ordered another set, got them on Saturday (yesterday) and installed the first right away. There was one spot that didn't seem to stick to the screen the way it should. I e-mailed the company immediately and got a response within hours! I had sent a picture and asked if there was something I could do about the problem. There was, apparently, a bit of dust--invisible to my naked eye--and they gave me clear instructions to remove the protector and clean it and the screen again with the dust sticker (one of the items in the installation kit that makes it so easy to get a good result.) In the same e-mail, they offered to refund me $4.00, in lieu of sending a replacement, but the reinstallation seems to have worked satisfactorily.At $11.68 for two excellent protectors, a separate installation kit for each, and a frame that makes it super quick and easy to lay the protector in place, you can't go wrong. But the superb customer service is what spurred me to add this coda to my original review.

I've bought this brand for multiple phones on more than one occasion, and always am very happy with packaging and everything that is included. Very easy to install, and I think the product is better than most I've used. I will continue to use them, no need to switch.

I was apprehensive about any new screen protector due to the many issues I’ve faced with them. This screen protector is bang on perfect, finally a glass protector that is actual glass. Installing it was easy, it fits flush and the guide actually works and isn’t just a plastic boarder.Installing - It took 2 attempts to fit it, attempt 1 was bad because as I was laying it down some dust shot under. Attempt 2, I carefully pulled it back off and used the sticker for dust removal (tip- gently use the sticker to grad dust on the protector itself if the above happens)Material - It feels like quality material, it feels like glass, very smooth and has a weighted touch to it. I’d say that’s a personal thing, I personally like it to feel glossy and “weighted”. Even the white boarder is glass and not that weird plastic others use. Don’t let that put you off, the touch screen still works perfect, no lag, no delay, no missed touches.Bubbling - Bubbling is (mostly) down to user error, but can also be down to shoddy products. Companies should focus on the edges as no-one wants a screen protector that will have bubbles around the edge and hear the excuse “because the iPhone SE has a curved edge” that’s not good enough. For me I personally don’t like seeing a gap between scree protectors and cases. As I said above, I had 2 attempts because of 1 bubble. I removed the dust placed the protector back into the guide, et voila. Done, no bubbles, no marks, no nothing.Edge protection - no most protectors have that gap around the border which is fine, but as mentioned there’s a fine line before it will bubble. This screen protector has edging, so even if it bubbled around the edge you wouldn’t see it. It fits into my case easy and without issue. I have a MOUS case, I concerned that the screen protector would have an issue with it. Nope it fits very snug, if it didn’t have the white border you wouldn’t know it’s there.After working in a phone shop for years I’ve had the chance to fit many screen protectors, in fact I became awesome at it. Fast forward to this year and I’ve gone through 18 protectors. At first I though I lost my touch but after inspecting the protector I noticed something they all had in common, the way they’re built.The iPhone SE has a curved edge most of the protectors I had were just a fraction too wide it left an edge bubble all the way round. The only thing I could do was put washing up liquid around the edge to stop the happening. Another thing they had in common was the claim on “no bubbles” air bubbles usually come down to incorrect installation, again I noticed this wasn’t the case. Because they didn’t sit flush around the edge it allowed air to trap itself. No matter how much you pushed the air it would keep bubbling. Lastly, they were “glass” which is in-fact false, most were too bendy to be that. And if it had the borders around the edge they were plastic, the screen protectors felt like acrylic as opposed to glass.Now for the pros & consPros- quality feel- change the boarder from black to white- easy to install- looks premium- no bubbling (take your time and remove the dust over an over again)- price (well priced for what it is)- extended warrantyCons- instructions in broken English- link to the install video only shows the iPhones that are full screen and both like the iPhone SE 2020.- would like to see a range of colour if possible for the borderIt gets a 5 purely because it deserves it, I’m hugely critical with screen protectors. Perhaps any other reviews I’ve done were through rose tinted glasses as they weren’t very good overall.(I would post a picture but I can’t take a photo of my own phone as I don’t have another one to do that with)

Very happy so far with this product. It’s been a few months and my screen is (fingers crossed) doing well. Fits perfectly with the phone case not problem with that. Very user friendly and the guide gadget yoke was useful. Came with a free pen/stylus/phone stand which I wasn’t expecting and was a pleasant surprise. Good instructions and the inclusion of the wipes was good. The air bubbles originally when I installed it took a little while to fully get out and I thought I had done it wrong but it only required a bit of elbow grease. I do notice sometimes that my screen is less sensitive that it was without (sometimes if I only tap something with the corner of my finger it doesn’t respond unless I lay my finger flat against the screen) but it’s probably impossible to find one which matches the sensitivity of the screen alone and most times I forget there’s even a cover there. Only thing I will say is the see through part of the screen is slightly too small for my phone even though it was the right one for the model. It’s not a case that I have put it one wonky because it is slightly covering the screen on both sides but not more than a millimetre or 2. Presentation was really nice and personal not usually something I care about but I had to comment on it here because it had the personal touch of something which had been put together by hand while being of a professional standard.

I chose this screen protector firstly as it is glass, and secondly as it has white edges - very few have this, most are transparent all over. I have a new phone with a purely black screen and was missing the white edges of my old phone! So this seemed like the answer! It certainly covers the black edges, but I have to say that the white appears a little grey when covering over the black so it is not pure white as an original phone would be - but good enough for me. The installation instructions were very simple to follow and I had no difficulty adhering it on the first attempt, with no air bubbles or other defects. I think having the glass protector might make typing a little less responsive, but barely so. I am very pleased I have used this product and feel confident that my screen is protected from the worst of daily scrapes and scratches.

Bought this for an iPhone 6S to protect the screen from damage after a second screen replacement. I usually avoid screen protectors due to the way they look.I love that this screen protector has almost full coverage, it blends in with the rest of the front of the phone nicely and doesn't stand out. It isn't a full coverage one and there is still a gap between the phone edge and the protector. This is to allow a case to be installed. I wish it was a millimetre or two bigger though. The touch sensitivity and clarity of the screen has not degraded with this screen protector and it is a full adhesive protector meaning that the adhesive extends to the screen area, unlike some competitor protectors where the adhesive is only on the surrounding edges.The main issues with this screen protector come with the edges, they are not rounded and rather sharp, but do get better with the case on because of the raised lip of most cases.Because of its design to be used on multiple iPhone models (6/6S/7/8), there are multiple light sensor holes at the top.The screen protector does cover a tiny amount of the screen on right and left sides and that's the main point that needs to be improved in my opinion as it's the most noticeable flaw long term as some text does disappear on the sides at times.The included accessories are an installation guide for novices and and some cleaning cloths which is great.

First ‘full screen’ I have ordered and was very simple to install. Looks better than the others and even though it does not cover right to the edges (which would actually mess with most cases) it certainly covers 99%. Simple to install and I even removed and replaced 3 times (mine own fault) and it stuck just as well the 3rd time as the 1st.I am going to buy another for my sons i7 and would have no hesitation recommending it. Comes very well packaged (seems a shame to throw the box away) and they even included a little pen/stand/stylus as a gift.