






🔔 Elevate your home security with sound that commands attention!
The Arlo Chime 2 is a sleek, Wi-Fi connected indoor doorbell chime featuring an 80+ decibel siren and customizable melodies. It plugs directly into any outlet for a wire-free setup and integrates seamlessly with Arlo’s range of wired and wireless doorbell cameras and security devices, delivering instant audible alerts and smart home convenience.


| ASIN | B09KZQ811G |
| Best Sellers Rank | #141,494 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #160 in Door Bells Chimes |
| Colour | White |
| Compatible devices | Android, iPhone |
| Connectivity protocol | Wi-Fi |
| Controller type | Android |
| Included components | Arlo Chime 2, Quick Start Guide |
| Indoor/outdoor use | Indoor |
| Installation type | Self Adhesive |
| Item dimensions L x W x H | 31 x 45 x 91 millimeters |
| Item model number | AC2001-100NAS |
| Manufacturer | Arlo |
| Mounting type | Wall Mount |
| Number of Items | 1 |
| Power source | Battery Powered |
| Product Dimensions | 3.1 x 4.47 x 9.14 cm; 88.9 g |
| Video capture resolution | 1080p |
| Wireless communication technologies | Wi-Fi |
S**S
Convient à mes exigences
K**M
This is VERY hard to set up. I do want to say that after an insane amount of Arlo articles describing install issues, I was eventually able to try everything under the sun and it eventually worked. Instead of getting lost in the Arlo support section for Chime 2, here is how you do it: 1) Install the Arlo Secure app (chances are good you already have this if you are attaching the chime for the Arlo Doorbell, etc) 2) Go to Add Device 3) Go to Doorbell and Chimes 4) Go to Chimes 5) Chime 2 6) Scan the QR code on the back of the doorbell itself (The instructions say you should be able to also find the QR code in the Quick Start Guide, but that is not true for the Chime 2, trust me that is a hot topic on the Arlo support pages. The QSG says install the app and follow the instructions, which are not helpful at all when the actual product won't do what the "instructions" say it should do. Side note, I actually took a photo of the QR code on my ipad and then started "scanning" the set up again and again with that so that I didn't need to sit on the floor with the chime once it was plugged in and rejected the set up over and over, causing you to restart from the beginning... by scanning the QR on the back of the plugged in device... super helpful... With a copy of the qr code to scan, instead of the device, I got a lot less frustrated compared to going back and forth unplugging and replugging etc. 7) A few seconds after it is plugged in, the white blinking light will do its thing, as expected. 8) Follow the app prompts to connect. Note - It says to connect to your network, but it is not your network yet. The Chime actually creates its own little Arlo_1234 network that it immediately asks you to connect to. Click that. 9) This is where you-know-what hit the fan for me... I have the Arlo Base Station which is directly cabled to my router, there is no wi-fi to it and no password. However, my normal wifi networks for 5 and 2.4 were not showing, only my Arlo hub and a few other devices that are for other things in my house. YOU CANNOT CONNECT TO YOUR BASE STATION/HUB, if you have one. DO NOT USE THAT AS YOUR "NETWORK," You MUST connect to you home 2.4 wifi network at this point. It does have an option to type in your own network info, which doesn't work, not for me or any of the users I found in the Arlo support forums. Here is where seek and find with complaint forums worked out though... 1) Turn off your phone's cellular network and start over with your phone connected to your 2.4 wifi network to begin with. 2) Go back to Arlo app and add the chime device up to the point where you have scanned the QR and connected to the temporary Arlo_1234 network it generated and starts looking for your own wifi 2.4 network to connect to. After it searched for what felt like 300 years, it did bring up the list of wifi networks like the very first try, which again did not show my 2.4 network. BUT when I manually added my 2.4 network this time, it worked... I think the powers that be were aware that I already had my Amazon order up and ready to hit the return button... so it got its act together. 3) Give it a name and choose your sound and then do the test run. 4) The end, it worked. Moral of the story, disconnect your phone from Cellular, attach to your 2.4 network, install app, add device, scan QR, connect to temporary arlo network, manually attach to your 2.4 network, wait for the paint to dry, and then it should hopefully work. Best of luck, it is great now that it is connected! 4 stars since it is by far the most difficult Arlo device I have (which is 1 of 8).
J**A
I bought this doorbell so I could hear when someone knocks on the door. It's loud, but the sound is short.
H**Y
Works great in any room
I**I
I’m generally very happy with this Arlo doorbell. The video quality is great and I love the wide-angle view, which captures everything around my front yard beautifully. The setup was simple and the device itself feels very well made. Easy to install. I love the using the two-way audio to talk with visitors
Trustpilot
3 weeks ago
5 days ago