A-Premium Complete Turbo Turbocharger with Gasket Kit Compatible with Chevy Chevrolet Cruze 2011-2015 & Sonic 2012-2020 & Trax 2013-2021 & Buick Encore 2013-2021 1.4L Replace# 55565353

I recently drove my 2014 Chevy Cruze (83k miles) from Idaho to Florida to gift to my niece for her first car. A day after arriving to Florida, the Cruze's check engine light came on...the OBD II scanner showed the dreaded P0299 low turbo boost code. Even though the car ran smooth, I noticed the power was reduced during high acceleration. I ordered the A-Premium turbocharger based on reviews. For anyone who has never replaced this turbo charger, set aside a full day to do the replacement. Most of the fittings and hoses will reattach will little effort. However, the oil return pipe and coolant return pipe were frustrating to attach...mainly due to the tight-fitting area and location. Other than those frustrations, the A-Premium turbo fit and construction was a very good! Be certain to add about 20 ml of synthetic engine oil to the oil feed bore before attaching the oil feed pipe and spin the exhaust turbine to distribute the oil into the turbo journal bearings before reattaching the catalytic converter to the turbo exhaust chamber. Regarding that pesky oil return pipe that I mentioned, I found that it was easier to bolt the tube to the turbo housing (torque only to 71 in-lbs) before installing the turbo and guide the outlet of the oil return pipe into the hole of the engine block until it snapped into place, as I lowered the turbo into place. Overall, the install isn't complicated or beyond the capabilities of a home mechanic. A flexible head ratchet and 10-inch extension bar makes the installation much easier! You will need Torx, reverse Torx, hex socket set, and 10mm & 13 mm deep-well sockets to remove the catalytic converter, since the bolts extend a little too far beyond the nuts for a standard hex socket. You will need to drain some of the coolant for this job, so be certain to have Dexcool II coolant (50/50 dilution) on hand to replace the drained coolant. It has been several days since I installed the A-Premium turbochager and the Cruze is running very well. In retrospect, the original OEM turbo was still in excellent condition...the turbo shaft had no noticeable play, no cracks around the wastegate or turbine, and the wastegate was in good physical shape. The issue was that the actuator (silver can-like structure with the arm) diaphram was starting to fail which failed to fully seal the wastegate against the housing. I could have replaced the actuator for $35-100 and saved myself from the headache of a turbo installation. Overall, I would highly recommend the A-Premium brand for this turbocharger! I'll make future a update once my niece puts some miles on the turbo.

Works great, installed nicely and everything works as it should! Definitely seems to be a good factory replacement option, good value for the money!

Se instaló en un sonic RS 2016 , todo funcionando a la perfección hasta el momento. Buena calidad y llego en tiempo y forma

Do not attempt to install this it is to long on this car reviews tell you to bend and force it your asking for trouble thats why they don't last. UAP napa sells a gates model fits perfectly takes 2 minutes. The other cruzs i don't know just giving you a heads up on this model only. Not saying this is bad product they need to remove the 2016 limited from there list. IT DOSE NOT FIT DON'T MAKE IT FIT. I sent it back.

Very impress with the easy fitment to OEM installation. Great deal.