SUNLU 3D Printer Resin, 1kg Fast Curing Standard 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage, High Precision, 1000g, Grey

SUNLU has been a reliable brand for me, and this 2KG resin is another great product. It cures well, prints clean details, and works great with my resin printer. The bottle size is a good value, and I’ve had no issues with the results. Definitely a solid choice for LCD, DLP, and SLA resin printing.

Solid performing resin at a very good price. Not too brittle, washes clean with IPA, and the details come out fine! It's my resin of choice for general use.

I wanted to print something that would genuinely feel like silicone or soft rubber for some grips but Siraya's rebound is too viscous for my m7 max. I tried a variety but the Sunlu was amazing. Closest to the softness of the Rebound, half the cost and yet somehow significantly less viscous. It was hard to find reviews on it, let alone where people weren't just using it as an additive to reduce other resins brittleness but I can attest in both regards it worked very well. True to its 66a claims and even compatible on large format printers it was fine. The cleanup with IPA was like any other resin. The results were invulnerable and while it doesn't have the same rebounding, it was extremely durable and flexible. Significantly easy to use without any failure, even on my first print with it.

This resin works great. I use it on my Saturn 4 Ultra and Saturn 4 Ultra 16. I usually mix a little ABS like resin into this to give it some better strength.

I purchased the beige resin. I'm a little dissapointed that the default picture on the store is indeed beige, but the actual color of the resin is a peachy "skin tone". The resin itself is thin, which is nice so that it flows well in the vat. It does require a bit more exposure time that my sirayatech resin does (somewhere around 3.5 seconds on an anycubic M3 max). That said, I had no failures out of the bottle using the default Lychee slicer layouts and supports. Lychee is nice because you can enter your machine and resin and there's a good chance it can provide a profile that will get you started. As for the actual prints, they came out crisp and clean. Though I will say the surface texture is noticibly chalky compared to more premium resins. The resin is extremely brittle. Which is typical, but not at all abs-like. The instructions warn not to leave the resin out, and if it would sit more than a couple days, to return it to the bottle. I can confirm that it starts to separate out this quickly, and when it does so, it separates like spoiled milk, with the resin looking splotchy and curtled. Not a big deal, you just have to shake it back up and its good to go. But again, more premium resins can last for a week in my vat with minimal separation. And when they do separate, usually the color falls to the bottom evenly. Overall, I'll probably purchase more of Sunlu's resin in the future. This performance was acceptable for the parts I generally produce as they need to be painted anyway. And hey, it's half the price of higher quality variants. Just make sure you shake vigorously and return leftover resin to the bottle if you're not going to use it.

Okay, I'm not a 3D resin printer expert but I did get this to work after a bit of trial and error and would like to offer a few points for consideration: (a) This is a thick resin. When starting a print, the motor and gear couldn't push the resin fast enough. Therefore, it seems to like to be a bit on the warm side to make it a little runnier. If that does not help, what did work 100% of the time is to use the front panel and sink the build plate into the vat and then start the print. That way it didn't have to push around so much material and printing started perfectly every time. (b) Be careful of void that generate suction. I got into the habit of putting in supports even with not needed to eliminate the suction. (c) Solid forms are still hard and of course, use more resin. Hollowing out will give large forms the soft feel. How thick depends on what you are attempting to achieve, but I just offer this as a note so that you can start experimented from the start. I have not been successful in creating a gadget for an enclosure. I'm still trying to figure out out make those work well. Anyhow, do expect some serious trial-and-error but when you get dialed in, the results are pretty neat. BT recommended if you like to experiment

Extremely impressed! This stuff is some of the least expensive out there, and works great! Prints come out perfectly and clean. I even forgot I hadn’t cured some recent prints yet because they were so clean post washing and dry. Love this brand!

SUPER CONFIABLE AAA++++++++

très bonne résine, très satisfait.

The tips of ghost rider fire tips all turned white. It seems the pigment can't remain as saturated on very fine details.

Finding the proper settings for my printer wasn't as easy as some others. looks great when cleaned and cured. great shade of green wife hates the smell.

Es wirkt, als hätte ich etwas aus Wachs geschnitzt. Das SUNLU Harz ist super und kann mit dem Halot Mage 8K problemlos gedruckt werden. Einziger Minuspunkt und warum ich es außerhalb des Tests nicht kaufen würde: Es ist nicht mit Wasser abwaschbar. Aber das ist meine persönliche Referenz.

Honestly … adhesion is a little TOO good. Buy a removable flexible bed cuz this doesn’t like letting go of the build plate. I’ve had a couple mishaps where my print shatters trying to pry it off the hood plate. That’s said, this stuff prints amazingly. There is no muss, no fuss, it just works.