🚰 Elevate Your Faucet Game with Effortless Style!
This set of 2 quarter turn tap valves features universal G1/2 connections and is made from high-quality brass and ceramic, ensuring durability and reliability. Designed for easy operation and leak prevention, these valves are perfect for upgrading your kitchen or bathroom faucets.
| Manufacturer | SHUILO |
| Package Dimensions | 10.8 x 7.9 x 3.4 cm; 140 g |
| Colour | Silver |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 140 g |
J**N
Just the job
Nice easy to fit
C**P
Good tap heads
I bought these to replace two very old heads that had seen better days. Easy to fit, cartridges required no extra lubrication or deburring, & they work smoothly without any leakage issues.One minor gripe is how loose the screws need to be in order to let them turn easily; tightening down at all will jam them up, & this may become an issue over time if they loosen further as they're used. Also the red & blue plastic caps are only stuck on using double sided tape instead of mechanically, so cleaning products may loosen those & cause them to come off.
M**N
Good price
Good for the price ,easy to fit
W**O
Good price but levers a little too deep for our tap.
Valves work fine and for a very good price. However, the levers were too deep and clashed with our tap body. Had to fit spacer washers into the lever spline which does reduce the amount of spline in contact. Also the edge of the lever skirt seemed uneven.I have seen similar products with a larger diameter lever skirt that would fit over the tap body. These have quite a small diameter so the depth of the skirt has to be considered more. Maybe the supplier should provide additional dimensions.
I**I
Poor quality,😡
The media could not be loaded. Not good quality don’t waste your time and money
A**R
Works well.
Works well.
T**E
Value for money.
Brilliant product, easy fit, woks well, looks great.
D**C
Short Nut Width, does the job
Firstly, the reviews that say these don't fit.. they will fit a kitchen or bath basin tap, not a bath tap.Came complete, 1 cartridge blue with anti clock 1/4 turn, 1 cartridge red with a clockwise 1/4 turn.Body is perfect for a kitchen mixer tap BUT the nut width is only 4.5 mm wide and will round when tightening into place. Use a 14mm deep socket to alleviate this issue. Be sure to have some vaseline to line your tap body as this will help seal and give some lubrication to the mechanism, DO NOT use PTFE on these, it will foul.It took me longer to remove the old faulty cartridges than it was to replace and these are perfect for a short - medium fix. Time will tell if they last!TIP: I swapped the hot and cold around (cold left/hot right) so the start point is 90 degrees and pull towards me to open, this keeps the levers out of the way when closed.**4 out of 5 as the quality is average and not wide enough on the nut to get a good grip to tighten**
Trustpilot
1 day ago
2 days ago