Thermal Grizzly Minus Pad 8-120x20x2.0mm Thermal Interface Pad

TL;DR: dropped NVMe temps by ~14C.I have a 2019 Razer Blade 15 Advanced and the NVMe SSD temps were getting a bit high, so I decided to buy some Thermal Pads.Heat dissipation and thermal performance were significantly improved after applying the Minus 8 (120 x 20 x 2mm) pad to the NVMe SSD.Stock NVMe temps:Idle: 58-64Cload: 67-77CNVMe temps w/ Minus 8 pad:Idle: 46-49Cload: 52-63CWorth noting is the Razer Blade 15 already had thermal pads installed on the underside of the back panel. I didn't remove them. I just added the Minus 8 pad to the stack by applying the pad directly to the NVMe SSD. I didn't remove the sticker on the SSD, either.I'm more than satisfied with this purchase. I'd highly recommend everyone add these pads to their laptop NVMe SSDs, at least.I'd buy them for the GPU, but my temps are always around ~76C, so they're not needed.If you have excessively high temps, the Minus 8 pads will definitely bring them down. Just make sure you get them thick enough so they will make contact with the back panel of the laptop chassis.

Needed to replace stock thermal pads for new ones and these seem the best

I bought these thermal pads to replace some thermal pads on my laptop, which had become dirty/damaged after disassembly of the laptop several times. The Grizzly pads were very easy to cut to the measured sizes and just the right thickness to fill the gap that my old pads did. The effectiveness is also better than stock, with idle temps now around 5C lower and load temps about 3C lower. They're a little pricey for the amount that you get, but in this situation, you're paying for the best. I'll definitely choose Grizzly again for my future thermal pad needs.

There weren't any new games that I was enjoying on my RTX 3080 Vision, so I thought I'd play with mining Crypto. My GPU on a HOT summer day on the second floor, where it's not as cool as the first was struggling. Very quickly my GPU was hitting 108 celcius at 83 Mega Hashes. A couple times it hit 110C.I put these pads on to replace all of the manufacturer ones first. Then I put pads on the back of the memory chips. The backplate is aluminum but it doesn't make contact with the back of the GPU. It actually traps the hot air coming off the back of the modules. and that's the biggest issue. These touch the back of the modules and the back of the backplate. They turn the backplate into a heatsink which is dissipated by the case fans. My temps went down to 90 Celsius and I gained 13 Mega hashes!Super worth it. I'll be doing this on all future cards whether I mine on them or not.

I bought this from onyx pc and the certificate in the package checked out genuine so that's good. The package itself was in one piece and it shipped pretty quick. The product itself seems pretty good quality, I used it on my Xbox one x. Only complaint I have is that there isn't enough for how much you pay, there also wasn't enough of the pad to get every chip on the Xbox one x. Temporarily i am using the bits and pieces that I had to cut off on the chips that weren't covered. I also I am not sure which why the pad is supposed to go there's a dotted sided and a smooth side.

Great stuff overall. Very easy to cut to size and apply. Saw substantial temperature improvement when applied on a 3060 12GB used in a local AI application. In addition to overall thermal performance, acoustic levels dropped substantially due to lower temperatures.Overall a great upgrade for the price and appears to be something that will make a lasting improvement.

Installed and immediately noticed a 20C drop.

If you want an excellent thermal interface material for your VRAM chips, I'd suggest this. I tried to use it to couple the heatsink on my laptop to its aluminum chassis and nearly burned myself because it was too good at transferring heat. It would, however, be great at keeping your memory those few degrees cooler so you can get a stable overclock on it.

These pads are good enough to cool down a card little more than stock pads.For 3080 you have to use 2mm on front side and 3mm on back side.Generally people don't change back side.I have also only applied on front side only.The results aren't extraordinary. I have pushed my oc and reached 102. That's the max.But I've lowered down it to 99-100 now.I was trying to test the card that's why I pushed it further. The card throws huge amount of heat, and thermal pads are very expensive.This minus pad is good enough to hold at some level. But you'll have to keep it cool. You room temperature should be cool.If you have any questions regarding this, reach out to me.Check out Computer and Mining Rig's Building (customisable) on Google!You'll find me here.I assemble computer dedicatedly, being a Mining rig doesn't change much, it's only another computer for me.Talking about temp. It actually increased outer temp for 4-5 degrees after applying this pads. But improved hashrate of 10+ MH/s.You may consider this as there are number of brands to go after.Only plenty of them to reside.1. Thermal right extreme2. Minus pad thermal grizzly3. Gelid extremeDon't use gelid ultimate.Don't use thermal right ultimateUse better wk pads. Use proper size pads.Apply them properly, with measurements.Have a tutorial running in front of you while working.Be gentle with the tiny connections inside.Most importantly, if you don't apply good thermal paste (mx4) properly.Or used less than required or more than required, then also you will face bad results.Try applying in x pattern with dots.It'll work.If it doesn't give results. Reapply paste by cleaning properly.Good luck! ✌🏻

伝導率は問題ないが厚みの調整が難しく、伸ばすこともできないので勘ではなく実測を推奨粘着力は並～弱で5回ぐらい乗せ下ろしをすると古びた付箋紙ぐらいの粘着力になるデコボコ面とツルツル面がある。サンプル画像よりは見やすいし触って判る程度に突起している

Cumple con lo prometido, aunque por lo que vale existen otras opciones, pero si es para memorias VRAM de graficas prefiero estas, es como todo no existe la talla perfecta...

Efficace

Sicuramente uno deie migliori Therml pad ma al momento del pagamento ho avuto lka sensazione di uscire da una gioielleria, 22€ (prezzo pieno) è eccessivo per un pezzo da 120x20x2mm. La quallità non si discute ma è veramente una rapina mi spiace, se avessi avuto possibilità di prendere questo spessore da un altro produttore non avrei di certo speso tutti questi soldi...