Spigen TPU Screen Protector For Galaxy S22 Ultra (Transparent) Edge To Edge Full Screen Coverage , Pack Of 2

Before buying this protector I had already spent more than 2000 in screen guards and that money was down the drain. Read a lot of reviews abt this protector and I knew it was not glass and risk was involved. Got it yesterday and I spent 10 mins installing it. Well it was worth the effort and the results were amazing. Not even a single bubble. Things to make sure while installation. 1. The help video shows that need to put in a case. I did it without and I think it was much easy. 2. Avoid using too much liquid that come with it as u have 2 guards. Save it for other. 3. Don't be scared to remove and put it back. I did it couple of time and had no issues. 4. Let it dry after install. Give it at least 1 hr before u put in a case.

First of all, the quality of the film is downright average. Not worth ₹600 a piece. Second, it is really really annoying to install even after watching the tutorials. Third, upon installation, the beautiful resolution of the phone was hindered and the feel of the screen was ruined, even the S Pen response became much more rough. It doesn’t even cover the entire screen and doesn’t fit properly even on the official Spigen cover. As someone who almost only uses Spigen products, I’m extremely let down.

I tried other affordable ones but just couldnt apply them without bubbles. This one even though is a bit costly, comes with 2 screen protectors and application using spray adhesive is the easiest ive experienced. Although it isnt tough like a tempered glass, it is good for scratch protection. Long term review- i did notice the film shifting on the screen after a few months, like while applying i had aligned with the front camera but the film had automatically shifted, found out that this is rather common when it comes to screen protectors. Overall im happy with the ease of application and also since we are getting 2 in the box then it seems to be a good deal.

Gets smudged very easily. If not applied well over the curved edges it starts peeling off, which looks ugly. If it's well installed it has great clarity and has excellent fingerprint recognition.

At first seeing different opinions from Amazon reviews I was a bit sceptical whether to buy it or not. I always liked Spigen products and finally decided to try this. Before this, I had installed a glass guard and it was total waste of money. Even though the glass guard fitted well, not able to read my finger print through it. After installing Spigen guard, I was totally satisfied. It is really smooth to touch and finger print is easily readable. I agree with other opinions in Amazon that it is thin and does not protect the front glass like glass guard, but you have to decide whether you need finger print scanner or not and purchase accordingly. Please follow the instructions in the video provided by Spigen which can be seen by scanning the bar code on the box. No issue of bubbles if you follow the instructions in the video properly. If you do not have any prior experience in installation, I suggest to get it installed at an outlet outside. I previously installed some screen guards and did not faced any issue installing this. Hope this review helps.

This is the best screen protector film I have ever had. Initially I was not convinced with the price. But, the the product was awesome, easy to install and edge to edge coverage. Pro tip: apply it as shown in Spigen's you tube video. Remove the water properly and if you see any water bubble effect after removing the water just don't worry about it. It will go away after a few hours. I applied it in the night with having a bunch of water bubble effect but in the morning it was all like factory fitted screen protector. No need to worry just give it some time. Spigen has become my favorite now because of their products quality. Got many product from them they amaze me everytime.

Not that great quality, very thin sheet. Expected better from Spigen.

Followed all instructions, properly applied after a lot patience, looked good when the application was done with no raises, no strange textures. Few hours later a lot of bubbles popped up and are not going away. Absolutely unhappy that I spent 1099 on this, they do give an extra one but it inspires no confidence as end result will probably end up being the same with the bubbles appearing later. It overall is hard to apply on a curved screen with raised camera bumps on a flat surface, they recommend a case for this but it is not an excuse to make it such a mess to apply on. After you apply the screen protector itself is very easy to mark with scratches. Will never recommend for the price you pay for it.

Habe die Schutzfolie für das Samsung Galaxy S22 Ultra gekauft. Ich fand die Installation einfach, und nach 12 Stunden ist die Folie so gut wie nicht mehr sichtbar. Sie ist Blasen und Hubbelfrei. Der Fingerabdrucksensor funktioniert 1A. Fingerabdrücke bilden sich nach einiger Zeit (Und das ist kaum vermeidbar), gefühlt dauert es aber um vieles länger als wie z.B auf Panzerglas. S-Pen Abdrücke gehen nach einiger Zeit wieder weg, wenn man nicht zu stark drückt. Nun zur Installation der Folie, so wie ich es mit TPU immer mache : Nach dem Auspacken habe ich das Gerät so gut wie möglich gereinigt mit Microfaser und Alkohol. Ich fand die Installation alles im allen sehr einfach und durch die Flüssigkeit die man auf das Display + Hände sprüht auch sehr flexibel. Die von einigen hier kritisierten Blasen oder das die Folie abgeht, sind in meinen Augen reine Anwenderfehler. Mann muss : 1. Das Display 200% Staub- und Fettfrei haben, also sollte man das nicht unbedingt im Wohnzimmer machen. Hände sollten vorher gewaschen und damit trocken und möglichst Fettfrei sein. 2. Flüssigkeit großzügig auf die Hände und Display aufbringen. Lieber bisschen mehr als zu wenig. 3. Folie vorsichtig und möglichst grade aufbringen, und minimal verschieben und glattziehen wenn es nicht direkt 100% passt. 4. Danach das Wasser und Blasen rausrakeln, das ganze vorsichtig von der Mitte zu beiden Aussenkanten drücken. 5. Wenn das sauber gemacht worden ist, sollten schon sehr wenige Restblasen und Hubbels sichtbar sein. Jetzt kommt wie auch schon andere sagen das wichtigste : Kanten nachziehen, aber von Display zu den Seiten leicht schräg. Viele (Selbst erlebt) machen das Schlicht falsch und rakeln am Rand vorbei von oben nach unten. Damit verzieht man die Folie, und sie wird sich lösen. 6. 6-8 Stunden ruhen lassen, damit die Restflüssigkeit trocknen kann. Nach 12 Stunden liegt die Folie absolut glatt auf. Alles im allen Spigen ! Top !

Easy to install and comes with everything you need to I stall is bubblefree

I recently had an expensive glass screen protector fitted at a kiosk. It looked great, but lasted about a week before cracking. I had this as a backup in the drawer, but I'd been avoiding using it because I thought it the process would be epic. After watching a quick application video (worth watching before you start), I installed the guard in about 20 seconds! It was so easy. Next challenge: Wear and tear - I had read the guards get micro-scratches but it has been a month and the guard still looks pretty good, I think you would have to be storing your phone against keys (or similar) to really scratch it up. And the best part is that it comes with a spare, so when this one gets really scuffed up, I can just easily replace it! Great guard!!!

I tried GlassDome previously, although it saved my screen, the protection layer got destroyed and had to be replaced. Having that said, finger print didn't work properly, trying to record on WhatsApp was not working properly (given the location on the extreme side). With this I can use my phone as if I don't have a protection screen on. Only test remaining which I hope I don't have to again, is a drop test :). It was pretty easy to install as well.

This Spigen product is the worst one that I have ever bought, it is a terrible product, I watched the video and that looked pretty simple, but it started already bad when I was trying to get the backing off, then the product is so flimsy that it is hard to get onto the screen straight, the because the s22 phone has a rounded edge I could not get the product to stick properly, I will not recommend this product.