AGPTEK Beats Ear Cushion, 2 Pieces Red Foam Replacement Earpads Compatible with Beats Studio 2.0 Wired/Wireless B0500 B0501 Headphone & Beats Studio 3.0

OK I finally broke down and did my replacement cushion install today and found the following points that I think will help some of the folks that say that the cushions are falling off.It’s super important that you pull off the base level plastic ring that’s actually mounted to the headphone frame. And what I mean by this is when you initially pull off the cushions you may think that you’ve gotten the entire cushion off, but that’s not the case there’s another piece that has to be taken down to the frame (see my photos).Once this piece is removed, the adhesive peels right off I didn’t have to do any scraping all I really did was clean it with alcohol after that pulled off it was completely clean and adhesive free.The new cushions have the same holes in the base plate there’s a line to the pins on the headphone frames so it was super easy to get perfect alignment.These look like original equipment cushions they feel just as good, to me.Mine are now sitting on a box that stretches the width, just like using a set of books would accomplish.So my beats studios just keep running I’ve replaced the broken pieces of plastic with parts from Amazon and now I’ve replaced the headphone cushions and these things look like new again after about four years of usage.The 3M adhesive on the back of the cushions are high-quality and should have no problem adhering and staying on to the clean flat smooth plastic base.This entire process of removing the old and putting the new ones on took me all of about 10 minutes.Highly recommended replacement, for the quality and the cost.

These are SO easy to replace! I read directions, read reviews and watched a youtube video. I used butter knife to seperate old cushion and adhesive from headphone. I used nail polish remover and Q-tip to get residue off-DON’T. Use alcohol as directed, nail polish remover started messing with plastic. ALCOHOL ONLY. Then I wiped with baby wipe. Before I peeled adhesive tape off new pad I did practice run to make sure I knew what ‘right looked like’, peeled adhesive paper off and made sure the 2 pegs on headset lined up with holes in new pad. Once they align and ‘set’ inside each other pad will sit flawlessly and like new. The second pad gave me some trouble so I pulled foam portion off then had to finesse old pad ring off. Alcoholed the residue adhesive off, did practice run as 2nd pad I did did not have charger port cut out and I needed to make sure pegs and holes were lined up and not upside down or wrong side (however you what to say it) once I knew right way, peeled adhesive tape off, aligned peg and holes and as you can see....perfect fit. Biggest problem I had was finding something proper width to hang headset on for the night to keep pressure on adhesive for the 12 hours directed to have pressure on them. Very easy, very pleased. So reasonably price and perfect for my Studio BEATS I’m ordering a couple sets to have on hand so my ear pads never get that jacked up before replacing.

It’s very nerve wrecking pulling apart $300+ headphones and equally nerve wrecking deciding what replacement parts to use that will be the same quality. My beats got damaged during a move and I stupidly bought replacement cushions off eBay without even checking Amazon. They were $2 cheaper BUT very poor quality. I have the blue studio wireless and the color was lighter, cushion was not soft and it looked small. I immediately went to amazon and of course top result were these for only $2 more. I looked through the pictures and everyone else’s appeared to be the proper color, size and thickness so I ordered.I watched like 3 or 4 different YouTube videos before going through with self replacing. I had difficulty at first removing the old ones mostly because I was scared of being too rough but I got the hang of it and the second cushion came off no problems. Cleaned them off, lined the new ones up, removed adhesive cover and stuck them on. These cushions fit perfect and they look just like how mine looked fresh out the box when I first bought them a couple years ago. Right now I’m letting them sit so I haven’t got to try them on yet but look and feel wise they look brand new. I will update my review if they don’t feel or sound good still but as of right now, I’m highly satisfied with the quality of these replacement cushions.

These were easy to install and seem to work well. They aren’t quite as soft or comfortable as the factory ear pads, but they aren’t uncomfortable. I haven’t noticed any difference in noise cancellation or sound bleeding, so I’d say they’re a pretty solid replacement pair in a pinch.

My beats ear “cups/muffs” were showing definitely showing signs of wear/tear and were in extreme need of an update. So glad I found this replacement! Super easy to switch out the old muffs & install the new muffs and the sound quality was exactly the same as the originals. Did not have any other problems with the muffs and have not needed to replace them again. Only thing to be cautious of is that the padding for these muffs didn’t feel as thick as the originals. The padding in the replacements are fine but your ears may get a bit sore after hours of nonstop use. Definitely recommend if you just need to update your ear muffs but not looking to purchase a new pair of beats!

Las almohadillas de mis audífonos estaban muy desgastadas estaba pensando en comprar unos audífonos nuevos pero esto me salvo, les comparto cómo tenía mis almohadillas y cómo quedaron las nuevas son fáciles de poner llevo más de 1 año con las nuevas y no se han despegado

Luego de un par de horas revisando las opciones disponibles me decidí por estos. Llegaron super Rápido.Desinstalar los viejo me costó un poco pues estan muy pegados y se debe tener cuidado para no dañar los audífonos. Pero la instalación de los nuevo es super rápida y sencilla. Tan suave y cómodos como los originales además que quedan perfectos. No koto diferencia en color y dimensiones d elso originales vs este reemplazo. Lo recomiendo.

Me encantaron, el color es casi idéntico y también son muy cómodas. Me gustaron mucho, utilizo diario mis audífonos por más de dos horas y las almohadillas se han comportado muy bien.

El par de almohadillas a simple vista parecerían ser repuestos originales, ya que la calidad que presentan es sobresaliente. Lo único por lo que podrías notar que son almohadillas genéricas, es porque su tamaño y su diámetro son un poco menor a las originales. Llevo 6 meses de uso, y hasta el momento parecieran como nuevas. Recomendado.

Geniales almohadillas, la verdad es que le quedaron muy bien a mis Beats Studio 2 Wireless, muy suaves, el material es de muy buena calidad, demasiado fáciles de instalar; no hay ninguna diferencia con las originales y como se ve en las fotos, se ven muy bien, muy recomendables.