Furinno PASIR Book Shelf, 5-Tier Modern Bookshelf, Open Shelves Bookcase 9" x...

Great little shelf! Easy to assemble. You need a drill and a hammer. Great for closets, dorm rooms, corners where you need extra space for books and things. Sturdy and easy to move around

Great unit! It’s sturdy and I like the size!

Easy to assemble and it looks nice. It’s quite smaller than I expected but I didn’t measure ahead of ordering so that’s on me. It’s durable. Best for holding children’s books.

Super cute and not that hard to assemble. I didn’t look at the measurements beforehand so the 5 tier is actually smaller than i expected

Product is very sturdy and perfect height. Held all my books up very well without extra hooks needed. Instructions was easy, will require an hammer and drill and the appearance is nice. Came with extra nails and hooks if you wanted to drill to wall to make sure it stays in place more.

This is an attractive 5-Tier bookcase. Just some things to be aware of: NOTE: TO ENSURE A STURDY BUILT THIS BOOKCASE WILL REQUIRE WOOD GLUE ON ALL CONNECTING JOINTS: SEE BELOW. 1) The height of the shelves is not high enough for an 8.5" x 11" periodical. If you're planning on placing standard-size paper or folders into a shelf this will not hold them. Smaller books and periodicals will work. 2) Instructions: I've had lots of experience building such furniture and this is an easy build, but you do have to be careful to screw the pieces together so that the finished ends that you see (the laminated ends and not the raw pressed wood) face the front... this may seem obvious but bears mentioning anyhow. The instructions are minimal with illustrations numbered step 1, step, 2.... etc. It's easy enough to follow. 3) Wood Glue Required: This is very important. The thickness of the pressed wood is around 1/2". The instructions do not mention this, but I will: YOU MUST USE WOOD GLUE ON ALL JOINTS because screws alone will not make this bookcase study and rigid enough using just the supplied screws. I would also add that IF YOU ARE NOT SURE HOW TO USE WOOD GLUE ON JOINTS DO NOT PURCHASE THIS BOOKCASE - OR FIND SOMEONE THAT KNOWS HOW TO WORK WITH WOOD. 4) This is the only tricky part: The bookcase is made up of 2 sections, one taller than the other and then they are screwed together using the supplied screws and 4 special circular clamping bolts. Be careful when inserting the clamping bolts so that they are placed into the proper holes on the shelf section that joins both sections. Pay careful attention to the diagram that shows the screws and the special clamping bolts and be sure you place them in the correct holes, other than that, this is the only critical area. 5) Unfortunately, the screw holes do not have any countersink (space withing the drilled hole to hide the screw head) so that the heads of the screws do not stick out slightly from the surface. HOWEVER: If you're familiar with woodworking you can drill the countersink holes yourself but be very careful of the depth because the material is not all that think and you don't want to drill all the way through. Otherwise, if you don't drill your own countersink holes, just be sure your properly screw the supplied screws in as far as they will go BUT DO NOT OVER TIGHTEN THEM BECAUSE THE MATERIAL IS TOO POROUS FOR THAT AND THEY WILL NEVER BE AS TIGHT AS THEY WOULD BE IF THE MATERIAL WAS REAL WOOD - THIS IS WHY YOU MUST USE GLUE WHEN ASSEMBLING THIS BOOKCASE. Overall, my build turned out OK, but only because I used wood glue on all joints. I would have given this review 5 stars but because of the lack of countersunk screw holes and the need for glue to ensure sturdiness it gets a 3 star. I would recommend this ONLY if you're familiar with assembling wood products and know how to use wood glue to ensure tight joints. This is not a difficult project and for the price this is not a bad bookcase if you know how to use wood glue. I would NOT recommend this if you've never built knock-down furniture and/or you're expecting a really solid bookcase when completed.

It's true you get what you pay for, but I've often been fine with a cheaper, put-it-together-yourself, furniture item. It might have been okay except for the instructions were so poor (though I must accept some blame) that I put the back pieces on and only afterward noticed that it was one-sided, meaning that I had the bad side facing out instead of against the wall. And there's no way to remove those tiny nails now. I'd return the whole thing if it wasn't already fully assembled. But to me the worst part of all is that to peel the number stickers off TAKES OFF part of the item so now you have a bald spot. I've never seen such a cheap facade material that it comes off that easily. And to add insult to injury, they give you little stickers that are supposed to match that goes over the screws, but they are such a bad match that it only draws attention to that spot! UGH, live and learn.

Bought this for my girls room and they absolutely loved it. It was very sturdy and holds up very well. It's very roomy and hold a lot of things.

Easy to put up and good quality

Naja, also eigentlich ist es recht schön. Zum Aufbauen sehr einfach, daher auch die 4 Sterne. ABER, die kleinen kleber, die klebebuchstaben, die für den Aufbau sind, lösen das Furnier beim Entfernen. Es ist allgemein eine sehr schlechte Holz Verarbeitung, ich hätte mir mehr Qualität gewünscht. Empfehlung kann ich weder dafür noch dagegen geben. Es muß einfach passen denke ich.

組み立ての際、ドライバーの他に背面板を固定するのにハンマーが必要です。 道具さえあれば15〜30もあれば出来ると思います。 背面板固定用の釘に ・長さが違う ・先端が変形（バリが取れてない？ 物が混じってました。 本数が多い釘だったので良かったですが、予備の無いネジだと組み立て出来なくなるので組み立て前の確認必須です。 （検品はキチンとされていない感じです。

Perfetta finiture basic

Non è semplicissima da montare, fra l'altro qualche vite è arrivata anche storta. Va bene come mobile ma non è un prodotto da 5 stelle.