EZ MAX 45001-OP- Residential Riding Lawn Mower Lift, 450lb Lifting Capacity, Fits Most Residential & ZTR Mowers, Folds Flat for Easy Storage, Use for Mower Maintenance Or Repair

It works, and well! No more crawling on the concrete to change blades or reach grease points that are almost impossible even when drop deck all way down. Follow directions, and very sturdy. Hand-cranking the lift is not hard at all.

This MoJack EZ MAX mower lift has been a big help for routine lawn mower maintenance. It feels solid and well built, and the 450 lb lifting capacity is more than sufficient for a typical residential riding mower. Setup was straightforward, and lifting the mower is smooth and controlled. Once raised, the mower feels stable and secure, which makes tasks like blade changes, belt inspection, and underside cleaning much easier and safer compared to crawling underneath. I appreciate that it fits a wide range of residential and zero-turn mowers. The folding design is also a plus — when not in use, it stores flat and doesn’t take up much space in the garage. Overall, this is a well-designed, dependable mower lift that does exactly what it’s intended to do. If you do your own mower maintenance or repairs, this tool saves time, effort, and a lot of hassle.

I have a John Deere E120 lawn tractor. I bought this item to elevate the mower to exchange the mower blades instead of taking the deck off each season, which was such a pain. This makes the maintenance task so much easier and safer. The setup of the lift takes some time but it is not difficult. Just read the instructions and take your time. There is also setup information shown on YouTube for MoJack lifts, which is helpful. This lift works amazingly well! Best decision to get the lift. The cost is a bit high, but it will last a number of years, and will save money in the long run instead of having the dealer do the exchange. Buy it, you won't be disappointed. Also, get wheel chocks which are essential. Take care...

I bought this lift to change the blades on my Ferris 400S zero turn mower. I service the mower at my house to save money not having to pay someone else for simple maintenance. . The instructions were clear and assembling went without a hitch. It took me about about 30-40 minutes but your time may vary depending on how many interruptions come you way (cell calls, texts, children, wife, etc). I like that the small bolts, nuts, cotter pins and the like were secured in their own packet, organized and clearly labeled. After assembling, I secure the front tires with the straps and chocked the rear tires. I remembered someone mentioning in another review that it's important to release the parking brake so that the screw mechanism doesn't bind. The MoJack Easy Max easily lifted the mower. The mower weighs about 750 pounds and the lift is rated at 450 pounds. I figured the lift was raising about 275 pounds at the most. It took very little effort to turn the lift mechanism and there was no binding. The packaging says it lifts 24 inches and I found there was plenty of room to work under the mower. I highly recommend using an impact driver to remove the blade bolts since there was no way I was going to get those bolts off with a socket wrench. Using the lift made it so much easier and the bolts were no match for the impact driver. I highly recommend this lift for anyone who wants to quickly and safely change blades. I gave 4 out 5 stars because I think it should be sold for less. But it did perform the task and that's what counts.

Easy to put together. Very sturdy while lifting rider. Easy to put away into storage.

I bought this last summer and put it together. It took me about 20 minutes to put together properly. You might want to schedule up to an hour depending. I’m using this to Lyft a John Deere 300 series riding lawnmower and it does very well. I do put a block wood under it while I’m under the machine with this as I felt a little unsafe however so far it has done the job very well. Storage is pretty easy and would recommend this product.

I always dreaded changing blades on my John Deere E140 lawn tractor. There is no safe easy way to jack it up and put it on jack stands. So I always went with what the owners manual says and removed the deck. What a pain that is. And just as bad putting it back on and trying to simultaneously line up 4 mounts perfectly front/back, side to side, and up/down. I knew there had to be a better way so I searched and found this. Wow. Came very well packaged, all the parts and hardware were there and in great shape. The instruction manual is very user-friendly and I had no problems assembling it, hooking up my tractor and raising it up. I used the option of raising and lowering it with a drill instead of the crank, and that saved time plus muscle endurance. I was able to go under the deck and efficiently swap out the blades using my blade removal tool/blade blocking tool (another aggravation-saver) and quickly lower it back down. Even including assembly time, the whole process took less time and stress than removing and reinstalling the deck. And I never questioned my safety while doing so, my blades need to be torqued to 65 ft. lbs. and nothing moved even a little bit during whole job. Just be sure to follow the instructions for securing everything before raising it up. This is hands-down one of my better purchases. Yes, it's not cheap, but in terms of effort, safety, time and cuss words, is well worth it. And if I had broken down and paid a mower shop to make a house call to replace the blades, that would have likely cost me in labor and service call what I paid for the Mojack. And he may well have used his Mojack anyway! And now I have it for next time, so it becomes more cost-effective over time. Let's face it, replacing mower blades is no one's favorite job. But this Mojack reduces it to tolerable. I won't say I'm looking forward to replacing the blades next time :) but I won't approach it with the sense of dread as before. If you have a riding mower/lawn tractor and change your own blades, you need this. I highly recommend it.

It works perfect for my zero turn lawn mower. It makes it easy to clean under it . I use my drill to left it up and down with little effort on my part

Actually it is the mower that it raises but my spirits have been raised as this is just great. I have a reputation of ordering things and returning them; an unfair slur as I only return things that are sub standard. This lift/hoist is anything but. Glad to say that I received a new lawnmower on the same day the jack arrived. Today I assembled the jack and raised the mower high enough to get under it to oil the deck before Winter. Couldn't resist trying the mower and then lifting it up again to clean the grass off. This fits the bill perfectly. Highly recommended and it will not be returned.

War auf er Suche nach einem Rasentraktorheber, dass eben so günstig wie möglich aber dennoch gut ist ^^ Es gibt einige Heber, die günstig sind aber sie heben den Rasentraktor von der Seite, was ich persönlich nicht wollte, weil es auf manchen Bildern/Videos so aussieht, dass das Gewicht teilweise auf eines der Vorderräder gelagert wird und weil man dadurch nur eine Seite gut reinigen kann. Mit dem MoJack EZ Max kann man den Rasentraktor auf eine angenehme Höhe heben und die gesamte Unterseite ist gut zugänglich. Der Aufbau war allgemein einfach und nach dem Aufbau habe ich den Rasentraktor gehoben und zum Test stehen lassen, während wir Harry Potter angeschaut haben :P Weiters finde ich es super, dass Gurte dabei sind, mit denen man den Rasentraktor zusätzlich befestigen und vor Abrutschen sichern kann. Vom Ersteindruck her definitiv sehr stabil, leicht zu bedienen und für diesen Preis nichts besseres zu finden und ja, ich habe lange gesucht und alles angeschaut, was ich finden konnte. Kann es persönlich definitiv weiterempfehlen.

Ideal pour l entretien

Lifts my zero turn safely and allows easy access to clean deck, remove blades. Great product...easy to assemble in about 15 minutes.