Rust-Oleum206999 Marine Topside Enamel Paint, Gloss White, 1-Quart, 32 Fl Oz (Pack of 1)

I used this stiff to paint the ‘hello 1960’s’ wall tiles on my bathroom. Underneath I primed with Stix primer which seems to really adhere to the tiles. Once it was dry I could not scratch it off with a fingernail so I assume it is a good base for this paint. Originally, I had issues with cratering when applying this paint and I was a bit hesitant to use it. But when I put on the first coat on a warm/hot, muggy day, no issues with a foam roller. One coat was not sufficient, although some folks might find it acceptable. For coat no. 2 I first scuffed the overnight dry paint with 320 paper, just enough to remove any lumps, bumps etc. Then I used a Mohair roller cover. Being bigger(regular diameter but 4” wide) it held a lot more paint and worked great. At first it took a few strokes to saturate the cover and there were tons of bubbles, but they all went away. This paint job had 80deg humid weather which I think was a plus. Slowed the drying process and allowed the paint to level nicely. Not glass like which might be attainable, but a very subtle texture which looks like its the way the tiles were made. And it is high gloss. We’ll see how it holds up over time but it looks great and a heck of a lot cheaper than a tile job. One caution. The stuff got old school VOC big time. I would not use it when you might have to keep a house closed up. I was thinking of spraying but I figured the masking, need for a respirator etc was not worth the effort. Overall, nice paint. It seems durable and we’ll see how ot works in a bathroom. I also painted the ceramic towel bar fixtures. They look like white smooth ceramic which I think was the result of brushing. To cut in edges I used the throw away chip brushes which worked fine. Not worth trying to clean an expensive brush with this paint

The media could not be loaded. I live in an apartment and the landlord refuse to upgrade the bathroom when I moved in I complain about the bathroom not being okay they have the all round tub and the paint had fallout the tub and it need reconstruction I wrote so many complaints they never did anything. I needed to feel comfortable in my home i couldn’t stand looking at bathroom like that.I kept researching So I came across this lady video on YouTube and she remodeled her bathroom with this paint . They said it’s for boats but it works wonders for my bathroom.I brought this paint in two colors and I painted by bathroom it has been two years now and my bathroom still looks great the quality is amazing you can see in the pictures how it changed my whole bathroom the rust prevention is great the color varies from the old one the texture is really good you just have to wear a painting mask and keep airflow within the area of use.It dries really quickly.If you ask me I would recommend using this paint .

I used this paint to put a protective layer in the engine bay of my boat. We just rebuilt a bunch of the interior and the old paint wasn't the easiest to clean and looked worn out. I think it turned out great! The white is very very white, it will reflect in the sun, I also painted the cubbies in the boat. I did use 2 coats of the paint on each piece. The paint is pretty thick and seems to have some self leveling factor which is great avoiding brush marks. The paint is dry to the touch in 4 hours but any thicker parts will take longer. I used one quart on the engine bay and I ordered another to do any trim pieces and the cubbies. I have about half a quart left over. This stuff smells strong, I would recommend a mask for the vapors. It's also very hard to clean off skin and brushes so gloves are a must. We ended up using gas to clean the brushes and that worked perfectly.

I am beyond happy with the results. I really need to replace the tub and surround in my kids’ bathroom, but I don’t have the time to get it done and don’t want things torn up. Anyway, I read reviews on this project and based off of the success others had using this for their tubs/showers, I have it a try. I used two coats (3 for the tub bottom) and had it fully painted in a day. It’s not a new tub, but it looks fantastic.I did a little repair with JB Weld fiberglass filler (the green areas in the before picture) and that was also easy to use and did what I wanted. I will do a little more work on the soap dish area when I have time to sand the fiberglass a little more.