Rust-Oleum Marine Topside Semi-Gloss Black Boat Paint | Durable Marine Finish, Fiberglass, Wood & Metal Surfaces, UV & Weather Resistance, Above Waterline Use, Quart

I used this stiff to paint the ‘hello 1960’s’ wall tiles on my bathroom. Underneath I primed with Stix primer which seems to really adhere to the tiles. Once it was dry I could not scratch it off with a fingernail so I assume it is a good base for this paint. Originally, I had issues with cratering when applying this paint and I was a bit hesitant to use it. But when I put on the first coat on a warm/hot, muggy day, no issues with a foam roller. One coat was not sufficient, although some folks might find it acceptable. For coat no. 2 I first scuffed the overnight dry paint with 320 paper, just enough to remove any lumps, bumps etc. Then I used a Mohair roller cover. Being bigger(regular diameter but 4” wide) it held a lot more paint and worked great. At first it took a few strokes to saturate the cover and there were tons of bubbles, but they all went away. This paint job had 80deg humid weather which I think was a plus. Slowed the drying process and allowed the paint to level nicely. Not glass like which might be attainable, but a very subtle texture which looks like its the way the tiles were made. And it is high gloss. We’ll see how it holds up over time but it looks great and a heck of a lot cheaper than a tile job. One caution. The stuff got old school VOC big time. I would not use it when you might have to keep a house closed up. I was thinking of spraying but I figured the masking, need for a respirator etc was not worth the effort. Overall, nice paint. It seems durable and we’ll see how ot works in a bathroom. I also painted the ceramic towel bar fixtures. They look like white smooth ceramic which I think was the result of brushing. To cut in edges I used the throw away chip brushes which worked fine. Not worth trying to clean an expensive brush with this paint

Great topside coat and easy to apply. Last for a few years and then had to redo a coat. Easy to apply with a roller and paint brush. Looks good for paint and not a gel coat.

I like it. Excellent abrasion resistance and adhesion. I got a quart of red for and old threadbare 14' solo fiberglass canoe. I usually use petit easypoxy...this is different. Easypoxy covers better but this seems to have better abrasion resistance and it is cheaper. I started by scrubbing the canoe with the normal purple concentrated cleaner (from any autoparts or hardware store) and water. I used acetone where the registration numbers were in case they still had the original mold release in the gel coat. I added in a few kevlar skid plates with pc-7 epoxy and feathered them in. I scuffed the whole canoe hard and tacked it. I then proceeded to roll this product on foregoing the cleaner and primer that they recommended. It was a low budget job and I was covering a red gelcoat with red, so I didn't want to see primer through any future scratches. It goes on thin, don't cut edges ahead or you'll see the lap. Don't do it in sunlight or the roller will pull strings. And don't roll over areas you just completed if you see a translucent area because it will run and sag. Let it dry as they say (think it says 24hours) and scuff it down and tack it again. This is when you realize how abrasion resistant it is...it takes a lot to scuff it. I did three coats if I recall...it was 6 months ago. Had I known I would have just coated where my skid plates and patches were because they were the only areas that stood out as a different color after the second coat. I used ithe canoe quite a bit and still launched it wet because it is only paint, but I beached it a number of times and shot a handful of old beaverdams with only superficial scratches. I did dig one spot when I slid it too close to a sharp metal edge, but I rolled a strip of fresh paint over it and it blended well. It does smell so moving it outside to off-gas is a must. I'll update if it fades badly from uv but so far it's still brilliant.

This paint is not that finicky: It's just that all the other variables involved in painting with oil are that finicky. I opted for this instead of epoxy because of overall project-related costs. I generally dislike oil-based paint because of the fuss in applying multiple coats. Rust-Oleum 206999 Marine Topside Paint has good coverage & elasticity, (however when I chose to order more paint I found batches from certain suppliers were noticeably thinner, to where painting vertical surfaces became problematic). And I did hate the corresponding 'chalky' Topside primer & preferred cheaper, higher quality Zinsser. Bottom Line - Despite the torturous heat in which I applied this alkyd enamel & interim snafus, this is a well-perfected paint (from the creamier cans). I just pressure washed it after 3 weeks & it looks & cured great & is doing well in the damp coastal coolness where every night the dew rises to water the ground & substitutes for rain. --Happy camper in the land of boats, here, sporting 1 coat of primer & 5 coats of this paint atop. PS: Unless you're a pro, aim for 3 coats at most, sans primer, and that will keep a tight ship if you did your homework: fiberglass, degreasing & sanding. Or pay the price for epoxy; but this oil-based alkyd enamel which is a true 'oil' paint does not dry or catalyze: It cures. If done patiently, we will probably appreciate this beautiful, natural finish for a long time. (The one-star lacking is due to those 'thinners' out there who need to 'repaint' --Old joke with a serious quality case in point. It's good paint but consistency varied between suppliers to the point where you could not foam roller paint a previously 24 hour dried vertical fiberglass surface with paint straight from later ordered cans without viewing some drip formations after painting. C'mon! God forbid if I had added Penetrol to that, let alone thinner, so with those it was not an option. The creamy consistency cans (ordered through Home Depot) took up to 20% Penetrol fine & did both flat & vertical work without drip. But later cans did not. I'd previously read this complaint by another blogger somewhere & did not believe it until experiencing it for myself in orders I received late in the project. l ordered paints through Grainger, Home Depot, Jamestown & Amazon. Get the good stuff which is excellent or send it back.)

Absolutely amazing paint!! My shower went from a dingy yellow, to a bright white. Looks like we bought it new. Make sure you use a premium quality paint brush and roller. When brushing, make sure to continue to following through the strokes. This sets fast and will leave drip marks. I had to sand down a couple spots but and the end all evened out.

Refinished bathroom sink. Great results. Easy to use. Kept exhaust fan on to keep fumes down. 2 coats did the job.

I got this for my laundry tub (plastic, typical tub). Cleaned & sanded the bottom and sides. Rolled on one coat and let dry for 3 days. Result: looks great, but I can scratch the paint off with my thumbnail, it doesn't adhere. First time the washer exhausted water (cold, not hot) some of it released and I could see old stains beginning to come out from underneath. Tube was never used for anything greasy, no acid type chemicals, etc. Just a plain laundry tub. I understand that two coats would be better, but if the bottom coat is not adhering two coats isn't going to make any difference. [EDIT 8/01/2026] Ok, it's been 1.5 weeks since my first application. The paint is hard and tight on the tub now. It took several days to really dry and cure. 3 days wasn't enough. Upgrading my review to 5 stars.

This product is great. Used to paint fiberglass top of my class b camper. I was amazed of how much surface one can covered. The paint sticks to everything including my fingernails. One way to tell if product is good for sealing, how easily is it to remove from your hands. Just simply a great product! Also would like to compliment Amazon. NOBODY compares with customer service. NOBODY.

Perfect

RUST-OLEUM 207000 Marine Coatings Tops is a great paint with excellent coverage and quality. I originally purchased it to do some touch-ups on our baseboards, and it worked beautifully. The matte finish looks clean and smooth, and it did a fantastic job covering up stains left behind after our wood floors were refinished. It applied evenly and dried nicely without streaks. Overall, a solid buy—highly recommend for detailed or high-coverage touch-up work!

Excellent Product. Great value and quality. Goes on very easy and covers well. Battleship Grey is an excellent color for my aluminum boat.

This is a very good quality marine paint and definitely feels more durable than regular paint options. Yes, it costs a bit more, but in my opinion the extra price is absolutely worth it for the longevity and protection it provides. I used it on my canoe, and one of the main reasons I chose this paint was to avoid having to repaint every single year. The finish looks great, applies nicely, and is designed to handle the tougher outdoor and water conditions that regular paint struggles with. If you want something that lasts longer and saves time and effort in the long run, this is a solid investment for marine projects.

We use this paint on our exterior brick mold and wooden trim on our house. The last color lasted over 25 years with zero peeling or chipping