Stainless Steel C Clamps Mini 1 Inch for Mounting, Heavy Duty Metal U Clamps for Metal Working, Small Desk Clamp with Stable Wide Jaw Opening & Protective Pads/I-Beam Design (6pcs)

I used these little C clamps to hold my computer monitor to a shelf on my little desk that actually isn't big enough to properly support it. They work just fine. The bolt heads (instead of a through bar) to turn the screw is compact and doesn't interfere with any movement close to the shelf. They seem nicely made and sturdy. All in all, a good deal.

Came fast didn't work for what I was using them for but there was nothing wrong with them

Excellent multi-purpose piece of hardware. I used this with flat bars of steel to repair patio umbrella rods that bent and broke when high winds pulled it off the deck.

I purchased the 13/16 set of six. Although some state the clamp isn't stainless, I think 304 stainless steel is still somewhat magnetic. I have some strong magnets and the clamps did stick, but not to the degree of strength that steel, like from an iron door frame, would. That aside, the clamps I received have threaded holes on all three surfaces. The hole with the bolt (and the bolt) are metric, 8 mm 1.5 pitch. The other two holes are 6 mm 1 pitch. It would be nice to have that in the description. The sizes are fine, I just had to mess around at Home Depot to figure out the sizes so I could get the other bolts I needed. For my application, these will work fine and I'm satisfied with the purchase.

Though there are probably thousands of uses for clamps like these, I used them to rig a brake assembly for a 1938 GMC pickup. This clamp allowed me to hook up a spring switch for the brake. It clamped on very firmly to the pedal. I was impressed by the quality and strength of the clamp.

They are exactly what they say they are. Good quality. Nice value!

Don’t look any further for high quality C-clamps like these! I have tried other lower cost (cheap) ones and you definitely get what you pay for! These are heavy duty, bent stainless steel bars, nicely tapped on all 3 sides. The bolts are high quality as well. I would say the only negative is the clamping pad is a bit on the light-duty side and riveted to the bolt, not fastened with a screw. I would definitely buy again!

These are not good products. Easily stripped and barely functional. Needs improvement

ممتاز مطابقة للمواصفات

Very Strong. Heavy duty

Work as advertised. I had these out on my patio for well over a year and a half; there is still no rust, and they're still holding my pulleys.

Just what I need for my project. Delivered very quick, so that means my project is quickly completed.

These clamps are really heavy duty and stainless! Really good quality. A+++ Max clamping width with full thread engaged on the steel C clamp is 42mm. Minimum 15mm.