Swpeet 120Pcs 10 Sizes Zinc Plated Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

no pigtails hanging out after tighting clamps ,leaving a nice clean look.

This is a very nice assortment of fuel injection clamps in just about every size I will need for some time. Although they are not stainless steel (so don't use them in marine environments or in the rust belt where the roads are heavily salted) they are zinc plated and should stand up to general use.My plastic box arrived with a broken hinge, which I believe is due to the vendor using too small a box and trying to stuff 120 clamps in any way they could. This is clear from the vendor placing some clamps into areas where they should not be, simply because if they were all organized properly, the box will not close. After receiving my purchase, I had to resort the clamps because they were slightly mixed up. I would strongly suggest to the vendor that they re-think how the partitions are installed inside the box to give the 10-12mm clamps more room. Or just use a slightly larger box. This will allow them to place all clamps properly sorted in the areas where they should be, and avoid the box from being damaged so easily in shipping.In spite of the plastic box issues (which does not affect the quality of the clamps), I would buy these clamps again. I had no issues tightening them down to 13 inch lbs, with no failures. They are an excellent value in decently made zinc-plated FI clamps and I would recommend them for applications where the use of stainless steel clamps is not mandatory.

Damage case. Not a massive drama but unfortunately everything is mixed up and have to organise a new container for the hose clamps

This clamps are the correct piece to prevent harm to fuel hoses. This translate into a safer job when replacing worn hoses. Common clamps may harm the hose which could result in a failure and an unwanted leak of fuel.

Decent quality clamps, the box they come in is poor!