BRINGSMART DC 12V 80rpm DC Worm Gear Motor 15kg.cm Self-Locking Reversed Engine Mini Turbine Geared Motor for DIY Robot Rotating Table Door Lock Curtain Machine (12V 80rpm)

I’ve seen others who have been interested in motorizing their Coolaroo Roller Shades. Well, I wanted that to so I figured out a ‘fairly’ easy way to do it. I’ve included a picture of the configuration and a video of the movement. The parts are: 12v 80rpm Reversing Motor [[ASIN: B07F8S57JT]], 8mm Flange Coupling [[ASIN: B0822425TT]], Motor Mounting Bracket [[ASIN: B073NZ81M9]], 12V Momentary Rocker Switch (DPDT) Reverse Polarity [[ASIN: B0885W19KL]], and a 12v ~10amp Power Supply. It will take some playing around to get it all put together, but getting the right pieces was the hardest part. I didn’t play around with trying to get a controller that would have stopping points. Just one more thing to break. So, with this it’s manual stopping points controlled by removing your finger from the switch. I mounted my configuration to a backing board. This allowed me to get it all setup before mounting it. The motor end has to be elevated a little bit to get the roller parallel to the backing board. The non-motor end is just the clip-in end that comes with the Coolaroo blind. Instructions: Take the black plastic end off of the blind that will be attached to the motor end. Attach the flange coupling to that end. I had to make some modifications to the interior of the tube to make room for the small nuts and screw ends I used to attach the coupling. Figure out where the motor needs to be mounted. Once the motor is mounted you can slide on the coupling end on to the motor, lock it in place and snap the other end into the clip-in Coolaroo end. Search for “reverse polarity wiring diagram” in order to see how to wire the switch. For my testing and video I used a weak (1.5 amp) power supply. Using a 5-10amp supply should provide a little more umph. I experimented with a 6’ wide blind. I don’t believe the motor I used would handle anything bigger. It just wouldn’t have enough torque. Mine will be hung on the outside of the window. I’ll need to get wires into the house and figure out where I want the switch. I’m thinking of just embedding it in the molding on the inside of the window. __________ Up for 2 years and working well.

Great buy

Tal cual viene en la descripción, funciona perfectamente lo recomiendo para tus proyectos.

Excelente

Works great for converting a manual shade to motorized shade. I used the other reviewer's parts list (thanks!) but I opted for a stronger power supply (5A/60w). It's plenty strong and reliable so far. If using it outdoor, I would probably fabricate a housing to protect it from moisture. I like how it holds the position when the motor stops so you can stop the shade halfway.