White Tire Paint Pen - Waterproof Permanent Paint pens for Car Wheels Lettering | Car Wash Safe and Durable | Made in Japan (Pack of 1)

Color is true red and gave the exact look I wanted... Like any other paint it should be applied in thin layers for best results. If you think your gonna color in the letters on the tire one time and get the results I did its not gonna happen! I went over the letters 4 times with thin coats and had excellent results. First and foremost make sure to clean the surface your gonna paint before using the marker, I cleaned the tires with rubbing alcohol. If you don't clean the surface first you might as well just not bother continuing as you will be very upset with your results!!Make sure to press down the point of the marker on a clean surface like a piece of cardboard to prime the tip of the marker so its wet with paint prior to application. Also when painting with this marker do not press down hard on the surface you are working on because the marker will bleed all over your project and make a mess resulting in you having to reclean the surface and starting over. Last but not least make sure when applying coats to wait about 10 minutes between coats for drying time, I personally did one set of letters and moved to the next wheel and by the time I got back to the original wheel for the next coat of paint it was good to go. When applying the 2nd plus coat do not press down the marker but instead just glide over the lettering with just enough pressure to transfer paint from the marker to the tire. Repeat this process about 4 times and you will have excellent results. This marker provided the best red color out of all the markers I have tried so far. Very happy with my results.

I've just applied the 3rd coat on my brand new motorcycle tires, and they turned out awesome! Two tires with 44 letters each and 3 coats is what I had managed to get out of the paint pen. I ended up ordering a 2nd pen for touch-up work down the road. I'm hoping that the paint will last and the touch-up paint pen won't be necessary.

Applying the ink is an extremely tedious process if you want it to turn out well. Taking tires off the car is the only way to get a quality finish. Also, the ink pens are finicky with dispensing ink. It may seem like it's run out but wait a while (30 mins or so) and it'll start to dispense again. I think it needs to suck in some air to allow more ink to come out. Best application advice, 1) Tires off the car. 2) Clean lettering thoroughly especially if you use tire shine regularly. 3) Dispense a small puddle of ink into the letter 'trough' and move the puddle around to completely fill in. Recommend the tapered end for doing edges and corners. Don't worry about getting ink outside of the lettering 4) Allow the first coat to dry completely (overnight) before repeating step 3. 5) After ink is dry, use a hobby knife or razor to scrape the paint off around the edges of the lettering for a crisp, factory like finish. I have not driven on it yet, will update on the durability when I do. I suspect it won't last long as the paint is not nearly as flexible as the tire. But it does look pretty good if you take your time. If you can't do as described, do not waste your time buying these or any other tire pens. I was able to do two coats on four tires with four words each tire on one and a half pens. And doing generous coats of paint. So there's plenty of ink there. Update: So as I thought, the paint is way too hard for the tire and just flakes off. After 5 miles of driving, about 50% of the paint has flaked off. I would absolutely not recommend unless you don't plan to drive the car. Now to find a polyurethane based paint.

Works great on tires, used this to paint the letters on my John Deere Ztrack tires. It recommended three coats on letters. Comes with two different types of tips. My only complaint is it’s to expensive for a paint pen.

Edit: Dropping this to three stars from four. Having had my wheels painted for some time, the product is faded a little, but still looks good. My only complaint is the company never sent the free set that you're supposed to get for writing a review or registering with them online - which I did. I will probably go with ordering tires next time, then using real paint on them next time instead of these markers - and I'll do that BEFORE they're mounted. I'm not expecting a paint like this to last forever, but I do expect a company to honor its commitments - if they say they'll ship a free marker, then they should ship a free marker. Otherwise, I'm pretty happy with the product itself. So, first, I like the look - especially from a distance! The product is easy to apply with the pen, but the pen needs some improvement. The thin nib started to fray, but this actually made it paint better until it completely wore out. Here's what you need to know to do this: 1) Make sure you have a CLEAN paper towel each time you go to paint. You'll need this for any overflow/spillage/drippage that occurs. 2) Have something to scrape (semi) dried paint with - this helps if you get some on the tire and it dries before your realize it - just scrape it off. 3) Wash your tires and allow them to dry (usually an hour or two - esp. if you have raised letters). Any good de-greasing car soap should work just fine. Use a tire brush - they run about $10. 4) DO NOT shake the pen without the cap! MAJOR mess - paint everywhere! Yeah... should have realized that from the start... 5) Go slow! Prime the pen, then just dab and stroke where you want paint. If some drips (due to excess amount of paint coming out as you prime), use a paper towel to wipe up the area immediately and then reapply where you want the paint. Make sure you get it off your rims immediately - it's easy enough to remove. 6) The pen doesn't always prime well. My tires had raised outline white letters originally. I found that I could put the pen INSIDE the letter and prime, and paint would fill in the letter, with just a couple of strokes, however, there is risk of spillage! 7) As you do this, keep a paper towel pushed against the bottom of the letter you are working on! This helps stop paint from splashing on your rim (see 5 above). 8) Move your vehicle so that the text/letters/word you are working on is close to the TOP of the tire. 9) Do one tire at a time, moving your vehicle as needed to put the word you're working on close to the top. 10) Allow the each coat to dry for at least a couple of hours. While your waiting, do the other tires. You will probably be done with the first coat on all tires and still have to wait. I waited overnight. 11) For raised lettering, I found it was easier to fill in the lettering first, then do the outline of the raised letter. 12) Lastly, there is a thin nib and a thick nib. The pen comes with both. To change the nib, just pull it all the way out, flip it, and put it back in. The one thing that I would say could be improved upon, is that Tire Ink should provide some thinner/paint remover and a black paint pen as part of a kit with the color you're using. I'd have bought that right off the bat for cleaning up messes. Overall, it looks amazing at a distance, and pretty good close up. Time should wear off the few paint smudges where I wasn't able to wipe up completely due to the paint getting into the pores of the rubber. As I just applied this, I don't know how long it will last, but I hope at least until I get new tires! I give an A+ for product, B- for pen design, A+ for style/look, B for ease of use. Overall, a solid B+.

Works great if you know how to use it. Easy clean up with rubbing alcohol. Dries quickly.

Two coats on coker vintage Indian motorcycle tires. Ride the bike couple times a month. Holding up nicely after 3 1/2 years.