Amazon Basics Outdoor Panel Light with Motion sensor and without Bulb, 20.1 x 27.4 x 9.9 cm , Stainless Steel

So far I am very pleased with this outdoor light, I have ordered it because I really like its design, it's somehow simple and stylish at the same time.Although I am a bit sceptical about its waterproof qualities, it is designed for outdoor use as the description suggests and has a IP44 rating which means that it should withstand water splashes from any direction.Apart from the front cover which has a nice and shiny stainless steel finish everything else it's made of plastic therefore the luminaire it's quite lightweightBeing almost ten inch tall this luminaire it's larger than I approximated from the advertised photos which is even better.Although it's a bit in an awkward position, the wiring was easy and so was the installation. It is not very bright, not close to a spot light but this depends on what bulb are you using inside.Overall this is a simple but stylish outdoor light, quality it's decent and as long as the price it's decent I believe it worth it.

This amazon basics outdoor panel light is great! Easy to install! Nice and bright! it has motion sensor and it works! quality is good! Good value for money

When this light was delivered there was little information about the design, and as I write this review there is still no product page or price available. There is still no price or product page available as I write this review, so I can’t comment on value for money, although I would expect this light to sell for £20 to £30.The timer can be set within the range 5 seconds to 5 minutes. Likewise the lux can also be set. Both of these are easy to adjust from the front of the lamp.The lamp takes an E27 bulb up to 25W. To change the bulb, you have to remove the face plate and then unscrew the six screws that hold the two halves of the casing together. It’s a bit fiddly, but hopefully not something that will need doing often.The light is designed to stick out from the wall a few inches, so the wall behind the faceplate is also illuminated.It has to be placed immediately over with power cable wall entry point – there being no recess at the back of the casing to accommodate a cable fixed to the wall. Because of this I was not able to install this light in the intended spot.Construction quality feels okay, although I’m not sure how watertight the plastic casing will prove since there is no rubberised seal where it’s two halves join together.

A stainless-steel finished motion sensor outdoor wall light (frontage) with plastic case housing electrical parts at the rear.The stainless-steel frontage is very attractive and stylish. It is however to be hard-wired.To make operational you have to remove the cover by means of two domed nuts at the top and bottom behind the cover (attaching it to the plastic box). You then have to remove six screws to open the plastic case and inside there is a bulb holder/socket (no bulb included) and then screw connections to connect your wiring.To enable connection for this light you will need to have a bulb and wiring ready to do so as neither is included.Be careful when opening as the PIR sensor is attached to the cover you are taking off and can't be removed.We are yet to wire this up as not trusting ourselves to do electrical jobs like this but it does look good aesthetically – it just depends if you want a hard-wired light or opt for an LED/solar/wireless lights that are available nowadays.

This amazing Amazon brand outdoor panel light is really awsome and working great.It's with motion sensor but without bulb but this is no any problem because this light is really good quality made and doing really great job.This product is made from stainless steel body, opal plastic diffuser.it's waterproof rating for reliable use in any weather.Stylish, corrosion-resistant stainless steel finish.I'd recommend to anyone for any price.

This light looks fantastic! It’s modern and looks great on my wall. It works well and is well made. I love the motion detection feature. Overall I like this and would recommend it.

Cute little outdoor light, super easy to install. Just wish it came with a bulb

Finally I got a electrician to fit this light, it seemed like a pretty easy job to install it and took him less than 20 minutes but I’m not keen on working with electricals that’s why I hired a professional. The light itself is reasonable quality however I have noticed signs of discolouration on the metal facing already from being out in all weathers which is abit disappointing but it’s high up so not easy to notice. The light he added gives a cool white glow and illuminated our bin area enough at night, the motion sensor does seem abit delayed as we can get quite close before turning on.

Acheter pour remplacer mon ancienne version et franchement bien.Les réglages du moniteur et luminosité se fait de l'extérieur sur cette version. Beaucoup plus pratique.Et en plus pour 14€ en promo que demander de plus

Dopo varie ricerche sono andato su Amazon basic x curiosità. Ho trovato questa plafoniera con rilevatore di movimento .Ne ho prese tre ,un vero affare. Semplicissimo il montaggio, funzionano alla perfezione e fanno anche un bel effetto una volta accese. D' possibile anche regolare intensità della luce x accensione e il tempo di durata. Ottimo rapporto prezzo qualità.

Esta lámpara me viene perfecta, ya que muchas veces me he dejado las luces encendidas de la terraza por no acordarme de dar al interruptor.Es el mismo modelo que yo tengo, solo que las mías son más antiguas y no traen el sensor pero son idénticas.Es fácil de instalar, trae un manual de instrucciones dónde te explica todo paso a paso.Funciona por medio de corriente eléctrica y viene sin bombillas.Trae un sensor de luminosidad y de movimiento que se puede programar en 3 fases para que se apague sola mientras no hay movimiento, 1 para 2 segundos, otra para 5 segundos y otra para 2 minutos, trae 2 potenciómetros para regular estás fases, solo tenemos que girar el sensor y allí nos encontraremos los 2 potenciómetros para girar con un destornillador plano.Sólo se puede atornillar a pared.Yo tengo puesta una bombilla LED y la verdad que alumbra muy bien.Buena calidad - precio

Aplique de grandes dimensiones con sensor de movimiento, en un diseño tradicional para exteriores, es perfecto para iluminar entradas, garajes o jardines, fabricado con materiales resistentes para una instalación sencilla.Se presenta en una caja de cartón, incluido manual de instalación y tacos para fijarlo.La chapa exterior está realizada en acero inoxidable espeso y robusto, mide 27,5 cm. de alto y 20 cm. de ancho, con una profundidad máxima de 10 cm. contando el sensor.Por detrás tenemos una caja estanca en plástico ABS que aloja el soquete tipo E27 y el sensor de movimiento con un amplio ángulo de detección.Producto de buena calidad, ideal para iluminar nuevas obras así como para reformas, ya que es un diseño habitual y de probada eficacia lumínica.

La lampada si presente molto elegante e l'effetto che fa quando è accesa è veramente bello. L'automatismo è perfetto e semplicissimo da settare. Ne acquisterò altre per il mio giardino.