OVERTURE TPU High Speed Filament 1.75mm Flexible TPU Roll with 200 x 200 mm Soft 3D Printer Consumables, 1kg Spool (2.2 lbs.), Dimensional Accuracy +/- 0.05 mm, 1 Pack (White)

I've bought from OVERTURE for awhile now. If I've learned anything, it's that their filament is awesome. This matte green is simply amazing to look at. If you're on the fence and looking for budget friendly prices, this is the way to go.Printed on a Bambulab P1S(The Stringing is most likely due to user error within the slicer)

I have not had any problems with this filament. No clogs, no spaghetti. Good adhesion and uniform layers at .16mm.I modified the generic TPU settings, setting all the fans to 70%, volumetric speed to 12mm3/s, and flow rate to .98. I set the bed to 50/50C and the hotend to 235C. Then saved the filament settings to Overture HS TPU.I use an engineering plate on an X1C with a light Aquanet spray, which I clean off after many uses and reapply. I have not tried it on any other plates yet.

I am impressed with how well the high speed TPU worked and how fast it was able to print! I used it to print the rib parts and under the arm parts of this torso armor. I would suggest if you want higher quality to slow it down if the part is tall. One piece I printed was tall and had a curve towards the top and I believe the curve is what caused a slight layer shift but the part is still usable. I was using the Bambu high-speed TPU setting for this filament and had it in an external filament dryer printing straight from the dryer.

This is decent TPU, but not the best if you're aiming for perfection. However, if speed is your priority, this might be a good choice for you.After thoroughly drying the TPU, I ran a test part, but unfortunately, I couldn’t get it to match the quality of another brand I’ve used. I tried eight test parts, even using the same slower profile from the other brand, but I kept encountering strange, mushroomed corners on every edge, with no improvement.I originally purchased this TPU hoping to get more speed for a project where I had a lot of parts to print. The price and speed seemed too good to pass up. However, the parts I needed require clean, flat edges to function properly—something I was able to achieve with other TPUs but not with this one at higher speeds.In the end, I'll likely use this for fun, non-critical projects where the quality of the edges isn’t as important.

This was perfect for what I needed