Description
- ABS material, the 2 chamber dispenser has a good sealing and abrasion resistance, not easily broken. The size of the entire product is Length 4.7" x Width 2.4" x Height 7.9" (120mm x 60mm x 200mm).
- 2 chamber dispenser, they are removable ( Sliding them from bottom to top ), to facilitate daily cleaning and refill liquids. Each chamber has a capacity of approximately 8.45 ounces (250 ml).
- Control the liquid volume, press the dispenser once, the nozzle of the liquid volume is controlled in about 1ml, you can save the use of liquid, especially when using hand sanitizer, to avoid waste.
- Equipped with 2 keys, used to open / lock the top cover. The top cover of shower dispenser is concave, you can place some small items on the top, such as hair clips or other.
- Firmly hanging on the wall by using 4 screws, the shower dispenser is stable and difficult to shake. Don't worry about it will suddenly fall down from the wall, and will not waste the liquids.
Please Note: Don't put too thick liquid into the shower dispenser, otherwise, it is relatively difficult to squeeze out. The Specification of 2 Chamber Dispenser: Product Dimensions: 4.7" x Width 2.4" x Height 7.9" ( 120mm x 60mm x 200mm ) Each chamber capacity: About 8.45 ounces ( 250 ml ) Material: ABS Material, Chrome Installation and Use Steps: Step 1: Clean the wall surface, rinse and allow to dry. Step 2: Use tools such as a drill to make 4 small holes, insert the plastic screw cover first, and then insert the screws to make sure they are firm and reliable. Step 3: Hang the base of shower dispenser on the screws, adjust the angle and make sure it is stable enough. Step 4: Hang the chambers on the base from top to bottom. Step 5: Open the top cover with the safety key, slowly pour the liquids into the chambers. Step 6: Press the pumps to begin dispensing liquids.
