Aeotec MultiSensor 7, 6-in-1 Zwave Sensors Contains Monitor Motion, Temperature, Light, Humidity, UV, and Vibration, Z-Wave Plus, Gen7, S2, SmartStart Enabled, Compatible with Zwave Hub Smartthings

Aeotec never fails to satisfy. This sensor is great for motion detection and is pretty accurate. It's important to remember the proper deployment caveats, but overall, the sensor is easy to deploy and handy to have on each room of you're trying to implement some great home automation.

The sensor pairs well and does what it promises. It just is kind of poor on motion detection range. I have to walk within 12 feet of it and wave my arms. But the other functions run well and are a good addition to my smart home. I use this with a Hubitat C-7 and it was easy to setup and configure.

Easy and simple to set up with Smartthings. I had to pair it close to the smart things hub and then move it to the location which was very far from the hub. I am using it hardwired and it is working exactly as I hoped it would. I do wish I could force it to refresh more frequently or on request especially since I have it hardwired so there should be no reason for it to save power as if it were on the battery. The motion detection seems... imperfect, but I am using it primarily for temp and humidity monitoring which works great. The light sensor and uv are surprisingly useful too. The sensors are: Motion, Temperature, Humidity, Illuminance, UV index, Battery, and device tamper alert.

I've integrated over a hundred devices into my home automation system (Home Assistant). I purchased 3 of these which were, by far, the most frustrating components I've ever worked with. They were an enormous hassle to pair, primarily due to security errors. Support is almost nonexistent on their website. Once I found a workaround to connect them, they would randomly enter sleep mode and refuse to wake up. After 6 hours of troubleshooting, I realized the manufacturer had shipped me products with very old firmware. An hour down the final rabbit hole... packing tape and a 10-minute drive to the UPS store felt like the right resolution for me... I won't be buying products from Aeotec again.

Great sensor, easy to pair with my hub, very expensive but seems like you must pay for the good stuff these days. I tried multiple other similar sensors like Zooz 4-in-1 and they are not coming anywhere near this one - quickly paired with no issues to set up and start reporting quickly.

I have 3 Aeotec MultiSensor 6's and I needed another and saw the so-so reviews on this 7. They were right, it's going back. The fit and finish on this is Cracker Jacks Toy quality. I literally had to pry the back cover off. Then cringe putting it back on and cringe again trying to lock it. I just can't keep it at this price. I'll order another Multisensor 6 Also why anything new uses the crappy old Micro USB connector is crazy.

I bought this to replace a 5-6 year old SmartThings sensor that was going though batteries like there was no tomorrow. I like that I can plug this device in and don't have to worry about battery usage any longer. I also like that it is a multimodality sensor. I am worried that the temperature senor is not calibrated correctly and I have not found a way to correct this. With the SmartThings motion sensor, it also measured room temperature and there was a way to adjust the device so it more accurately measured the room temperature. The Aeotec device doesn't seem to have a temperature offset. It shows my room about 6 degrees warmer that the other temperature sensing device in my room and it doesn't "seem" to be as hot as the device states that it is. Also, after no movement for a while, when I move and it is dark in the room, there is a momentary flash of light. It is so short it is hard to see, but it is noticeable. I notice it mostly when getting up in the middle of the night for the WC. It's not so bright that it hurts my eyes, but there is definitely a flash. It would be nice of there was not one. I would buy this device again, but those two issues keep it from getting a 5 star rating. The device is much smaller than it appears in the images. It is longer but not any taller or wider that the SmartThings motion sensor that it is replacing, and it can run on electivity instead of battery if one so choses, but can still run on a battery if there is not power at the location.

Good purchase. Does just what I need it to, and handles being in my crawl space without losing its connection. Handy little device.