Whitestone Dome [Premium Folding Film for Samsung Galaxy Z Flip 3 Premium Screen Protector Anti-Bubble HD Clear PET Film Screen Guard for Galaxy Z Flip 3 (2021)

This is the second one I have bought for my Flip 3 as the first one only lasted about 8 months before the oleophobic coating starts to wear off and it lifts away from the crease. But no other complaints as it is still premium and protects the screen as advertised.Reading some of the reviews, it appears that a lot of people make the same mistakes when applying. The screen protector has its own protective film, which is very thin and tears easily. But it doesn't mean you can't still apply the protector. Some people get the 2 mixed up and it would be helpful if the film was tinted to distinguish it from the actual protector.But following the skimpy instructions it's easy enough. The trick is to put the protector in the jig (the top part is elevated) then squeegee SLOWLY from the bottom to the top, which in turn pulls the protector away from the jig's pins. It looks like it's going to rip, but it won't. Only detach it when you have reached the top of the screen then peel away the film (that will still have its tabs attached).Any fingerprints caught on the protector will fade away in time and a light rubbing on any air bubbles should be easy enough.It's a bit expensive but it's the only screen protector I trust. Just have a little patience, go slowly and use a great deal of care, and you will be happy with the results.

I followed the instructions on the QR-linked video to the letter, when I eventually found the right video. The first thing that went wrong is the actual film to apply to the phone split and tore at the top when removing the protector sheet!Then, despite everything including the screen being cleaned immediately prior to applying, it didn't stick properly, had loads of bubbles I couldn't get rid of that are nearly always visible, and lifted immediately on the fold when used. It's only been on 3 hours and is already failing. Bought this because of the fancy fitting jig included, which worked but not brilliantly, and will definitely look elsewhere for the next one!I think the only thing positive I can say is it's better than nothing, given the fragile plastic screen it covers!!The nature of these things mean you have to use them to find out how good they are, and this isn't at all, so now it's used there's not a lot to return to Amazon!

The screen protector as delivered promptly and the contents were as described. The instructional video was comprehensive although I found it helpful to watch additional YouTube videos. This gave me the confidence to proceed. I must admit I was a little apprehensive to start with. The only difficulty was removal of the original factory fitted screen protector. However the little tool provided made the job much easier. I also started to remove it where the original had begun to lift where the phone folds. The provided jig made the installation quite straight forward. I paid particular attention to cleaning and dust removal with the materials provided. I also wore powder free latex gloves (not included) throughout.I am very pleased with the results, which I think may even be better than the original. The screen protector couldn't fit any better, with all the cutouts centered in the right place. In use it feels a lot smoother than the original. I also think the screen appears brighter, but that may be just my impression. I really didn't think I could achieve such professional results. Thanks to the jig and the quality materials provided. So although the initial price seemed a little expensive, the quality and end result make it worthwhile. If like me you were disappointed to find the z flip 3 original coming away from the screen, I'd highly recommend this product - it's well worth the money.

Firstly, I must confess that I was also a bit confused by the instructions, and initially thought this was possibly the worst screen protector I'd ever bought! However, after stripping it off again in a fit of disappointed rage I realised that what I was actually looking at was the protector's carrier sheet. You don't tear off the top and bottom pieces, you simply fold them back on themselves to break where they join and pull the whole thing off, the screen protector is left behind, and so well affixed that it looks like there's nothing there! The photos on here that look like it's full of bubbles and not sticking to the crease is the plastic covering of the screen protector and not the protector itself, so watch and re-watch the video tutorial, especially the final part!Where is loses stars is two fold, 1. it's expensive, and 2. very wasteful. My photo is of the plastic that will now have to be disposed of, single use! You cannot just buy the actual screensaver on it's own, in this day and age I find this appalling, and to be honest, if I'd known I probably wouldn't have purchased.So yes, the screen protector works very well when fitted correctly, but the waste plastic really lets it down.

I made the mistake of watching YouTube user videos explaining what to do, and as a result stupid me messed up and had to order a new kit as the instructions were misleading. With the replacement kit I did EXACTLY as the manufacturer, explained and the result was 100%.

At first was not wanting to get because of the price but the jig they give you is extremely easy to use instructions are clear and results I'd perfect after 30 minutes of use the last 2 bubbles disappeared. Will definitely be buying again if my screen protector starts lifting again.-EditAfter using my phone few more times an issue appeared where a roughly 1cm line appears just before the crease where the screen protector jumps off the screen and folds on it self. I can't provide pictures as I don't have second phone but dissapointing after the amazing installation and first 30-50 minutes being issue free

The screen saver on my Z flip 3 was separating at the crease after less than 18 months. It finally became so annoying that I decided to try replacing it myself. I saw a video of this screen saver and liked the idea of the installation jig. The hardest part of the installation was removing the old screen saver. I couldn't lift it at the corner but finally started at the crease where it was already separating and that worked just as well.Definitely watch one of the installation videos; the included instructions aren't very good. I did end up with two tiny spots on the screen which are my fault as I cleaned the screen, but forgot the step to go over it with the lint remover. I only see the spots when the screen is black. I can't speak as to how long this screen saver will last, but I really like this phone so if it lasts a long as the Samsung screen saver, I'll be happy. My husband's phone is having the same problem and I will probably replace his screen saver now that I know how easy this is. My only complaint is that the screen saver doesn't seem to be available unless you buy the whole kit.

The original screen protector on my Flip had started to crack at the hinge. My guess is from not letting it warm up enough from the winter cold here in Canada. I put up with it until now because it was getting worse and I was worried about the actual screen being damaged by the protector. I wasn't about to fuss with Samsung since there are no Samsung stores or certified repair shops anywhere nearby. I did a bit of research and chose this as the best option for me.I have to say I wish I had had this screen protector from the start. For one, it actually covers the whole viewable area of the screen. The preapplied screen protector leaves gaps along the edges which diminishes the viewing experience. Second, it feels great. Not quite like glass, but for being plastic, it is very, very close due.The included jig and tools used to apply the screen protector means you don't even have to worry about aligning anything. Just set it up properly, give it a swipe with the squeegee, and it'll be perfect. Just don't be like me and accidentally stick your fingertip in the middle of the sticky side of the protector. Still turned out great though, only the tiniest of a hint I didn't do a 100% perfect job haha.TLDR; Even (perhaps especially) if you're not a pro at applying screen protectors, until something happens that makes me change my mind, I definitely recommend this product. Feels great, looks great, and not even that expensive when you consider how easy the application is.

No viene completo con el aplicador la mica se ve desprendida y rota la caja ya estaba abierta y rota espero el reembolso

Ce produit permet de changer soi-même le film protecteur d'un Samsung Z FLIP qui, il faut le dire, se degrade assez rapidement et coûte cher à remplacer chez le réparateur choisi par Samsung.Les instructions et le vidéo sont clairs et permet de bien installer le film. Merci !

Dopo l istallazione ho atteso almeno 72 ore prima di chiudere il flip la pellicola sembra resistere 😊