VersaChem 11109 Rear View Mirror Adhesive

Excellent product, worked great, first time using anything like this before. I scraped all the old glue off the button and window first. I used a fine grade sanding block (used for sheet rock) on the button to clean any excess glue off and to rough it up a bit. I then cleaned off the button and the install spot on the windshield with alcohol. I let them dry for a minute then applied the activator on the button and let that dry for 2 minutes. After that I put a drop of adhesive on the button. I lined the button up to where it goes on the windshield and firmly pressed on it for 2 minutes. The directions say it is good after 30 minutes but I let it sit overnight to be on the safe side. It seems to be holding very strong as I had to bang a little bit on my mirror to get it on since my mirror has a large tension clip that goes over top the entire button. I am very impressed with the product so far. I thought I would have trouble with it reading all the reviews on other products, that is why I got this one since it had the best reviews. The few that are having trouble with this product must not be doing the prep work/cleaning properly or maybe they have an expired product.

I was skeptical about this glue. Some reviewers said it doesn't work. I give it a try because it was cheap. I applied it on for a month now and no problem so far. I don't know why people give it a bad review. I follow the direction and it sticks. There are a few things that I have to assume that wasn't clear in the instruction.1. Applied prime to surface. It wasn't clear to apply only on the metal piece of the mirror or both mirror and windshield. I applied on both. Also instruction said let the prime dry, but how long. I let it dry for 5 minutes to make sure, but you can't tell by looking at it. And I don't want to touch it.2. Instruction said to hold it with pressure for 30 seconds for it to stick to the windshield. I have to assume they are talking about the metal and plastic piece that holds the mirror and not the whole mirror itself. Commonsense said it will be too heavy with the mirror. I hold it for 1 minute and it was slippery. It try to move around. Instruction said not to move it around when applying glue. After it hold up, I left it there overnight before adding the mirror. It was hard as a rock.3. Instruction didn't state what temperature it needs to be for optimal performance. I assume it can't be too hot or cold. So I applied it at room temperature and it worked perfectly for me.Overall, this product worked as advertised.

This adhesive worked perfectly to reattach my rear-view mirror. It bonded quickly and holds firm even on hot days. Highly recommend for anyone needing a reliable fix.

Whatever you do, don't waste your money on this product, it does NOT work! On sunday I glued my rearview mirror on. I applied the primer, let it dry for 1 minute, applied the glue and put the small plate on mashing hard on it for 1 minute...JUST LIKE THE DIRECTIONS SAID TO!!! I did not attach the mirror yet because I wanted it to set over night before putting the mirror on the little plate on the windshield. Monday I went out there and checked to see if it was going to hold. It felt pretty strong as I tapped on it, so I assumed it would hold. I then attached the mirror on the plate...notice I let it set over night before putting the mirror on the plate. Today is tuesday and I went around the corner store within 3 miles of where I live and the whole mirror fell completely off! It fell to the floor board and as I looked at it laying there, I thought: "Well THAT was a waste of my money!!!" Moral of this story: DON'T WASTE YOUR MONEY ON THIS PRODUCT, IT DOESN'T WORK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I had mixed reviews on this one. I remember buying a product that was similar or maybe this same one in the past and it worked really good so I bought this and it didn't work at all even though I read and followed the instructions. I bought another one though and followed the instructions again and am mystified as to why it worked so well the second time. So I give it 4 stars since it has worked so well the second time and am so happy that the mirror is not falling off in the heat of the summer. I just thought of a reason, the second time I used a brand new metal plate that gets glued to the window and attaches to the mirror. Maybe that was the difference.