Vinyl Sticker Paper, Premium Glossy Printable Sticker Paper for Inkjet Printer, Quick Drying, Water Resistant, Scratch Resistant, Sticks to Most Surfaces, 8.5 x 11 Inches, 20 Sheets

This worked PERFECTLY for the stickers I needed to make. It’s easy to use and sticks well. I’ll definitely be using it for lots of stickers.

Worked great in my Canon printer. Good quality sticker paper. Easy to use.

This review is for the Holographic Crystals version of the paper, tested with official HP brand ink on a (very low end, aka, cheap) HP DeskJet inkjet printer.THE MOST IMPORTANT THING TO NOTE WITH THIS PAPER IS THAT FOLLOWING THE INSTRUCTIONS CAREFULLY IS A MUST! - In particular:1: Be sure to print a test page first and tweak the colors as necessary from there, as what you see on a regular white piece of printer paper is pretty much what you'll see on this; and2: Be SURE to change your printer settings to 'best quality' and 'glossy' (or in my printer's case, 'photo') as this is what will force your printer to use ALL color ink and NO black (as black ink does NOT stick to this paper.) The resulting shades of grey and black had the faintest bit of a brown tint because of this in my testing, but even in the entirely monochromatic / greyscale sticker I printed it wasn't very noticeable from most angles. Color ink gets used up very quickly this way, so be sure you have enough for a full page before printing!I've also noticed that there is a tiny indented line on one end of each sheet of paper, and that, in addition to only inserting one sheet at a time, my printer tended to have less trouble taking the paper when I put it in that end first. (I also noticed that the one time it really freaked out on me and gave up at the beginning was when I put it in the other end first.)Pastels don't always show up very well on it either from all angles, so I would also recommend darkening any colors that seem lighter / faint on the test sheet (blues and green in particular in my case, whereas pinks and yellows seemed to have less of a problem.)I did not attempt to use a machine to cut them out (the product information says the paper isn't compatible with machines like Cricut or Silhouette,) but had no trouble using scissors.They are also water-proof and smudge-proof as claimed, though getting them wet does cause a faint little bit of color bleeding / blending. I actually kind of prefer the stickers that way, however- it makes them look less like they were printed with a cheap inkjet printer, somehow. In fact, I've actually gotten a few wet on purpose!Overall, though I have no prior experience with printing stickers, I was very pleased with the results!They remind me very much (especially the bigger 3-4 inch ones,) of the stickers you could find in grocery store sticker dispensers and collectibles shops in the 90s. For this reason alone I would definitely recommend the Holographic Crystals print! Basically, I love these stickers and had a lot of fun making them, even if they did make my printer act a bit finicky at times.

Now keep in mind that if you want them to truly be waterproof then you will need to laminate them. Otherwise the ink washes off too easily even after letting dry for 48 hours.But great quality for holographic sticker paper!

I used this to print out fun book themed images that I cut out and stuck to colored paper. I trimmed the edges and laminated to make fun bookmarks. As such I can’t speak to the durability since they’re laminated now, but I love that it’s holographic but also printable. Great for craft projects.I did use a sheet to help some young family members print some stickers for their water bottles and they were very excited to take those home to start decorating.