JAYO 3D Printer Resin, 1KG 405nm UV Curing Standard Photopolymer Resin for 2K 4K 6K 8K LCD 3D Printers, Low Shrinkage, High Precision, Clear Green 1000G

Updated reviewI was a little hesitant of this resin at first. I got it back in the end of 2021 during their 2kg for $25 sale and really wanted to like it. I got okay use out of the black but seemed to have too many issues for it to really be worth it. Once I started using the transparent resin though everything changed. I love the transparent and it is now my go to resin for most everything.Durability:You won't be getting any ABS like resin durability out of this, but I have found it's quite durable. I've dropped my models on the wooden floor many of times and only really had issues with cracking on very delicate parts such a as bows, belts, and strands of hair. I do often drill and tap the prints with my Dremel and have never had issues with it being too fragile. It's probably not best for high intensity parts but it'll work great for figures and miniatures (I print up to 1/3 scale and it supports its own weight very well after over a year standing)Smell:It's right in the middle. There are definitely some light fumes from this resin and I wouldn't recommend using it without any ventilation. Having said that I would also say it is significantly better than some other resins I've used, especially cheaper ones.Print quality:I haven't had any issues with the quality of the prints I've had after over a year. All the details are crisp and the resin cleans very easily with mean green or isopropyl alcohol. The transparent does have to be babied a bit more than other clear resins to get that really clear look. I typically cure mine in water to help and then wet sand from 1000->5000 grit before clear coating it if I want a good glass look to it. I have included what it looks like normally cured without sanding in my photos of cooler (I over cured it a bit so it lost too much of it's clear look. A bit of clear coat will bring back the look more or less). The transparent does take a fraction or two more per layer to cure, I dialed mine in at 1.9seconds per layer at 50% power on my anycubic mono x, but every printer is different slightly.Price:By far the best reason to get this resin. I almost exclusively buy from Jayo because of how dirt cheap it is. There are a few cheaper resins ($13-$17 a kg) on Amazon, but they're either hot or miss for every bottle or downright terrible. A lot of times you can still even get the 2kg for $25 bottle deal (most people have good results with black, but I don't think I calibrated properly for it). I get transparent for about $17/$18 a kg and I think it's by far one of the best deals for resin.TLDR PRO- dirt cheap, great results, decently durable, smell isn't too strong, lots of colors options, easily able to be drilled by handCONS- there are more durable high end resins out there, the clear won't be as transparent as some high end brands, I had trouble with the black resin personally, it does have a smell.All in all I would recommend this resin and I will be buying a lot more of it as long as it stays this price.

I like this resin, very cheap and comparable to a lot of my mid grade resins that run twice this price. I'm gonna start using this resin for my draft prints.

I like to buy Sunlu resin when it drops bellow $16 per KG. I wasn't seeing that happen, and read that Jayo is the same as Sunlu. This worked on my Sunlu profile and quality seemed great. I mostly print Minis for my kids and occasionally prototypes.I'll probably keep getting Sunlu, but this seems like a solid substitute (as long as it is on sale).

Bought this on a whim since it was much lower priced than the usual Anycubic Eco Resin I was buying and I was already considering trying a new brand at some point, so I rolled the dice on this, and have to say I'm really surprised how nice my first print with it came out. I was pretty hesitant for a minute since it was so cheap and I had never heard this brand before.The smell was no worse than the Anycubic Eco resin I was using and I might even say it's a little less strong, unless it's just me already being used to it.This is a more true gray than Anycubics gray, which was more blueish tint than gray. Details show a lot better on this color. If this stuff stays the nice price it was at the time I bought it, I might just have to make it my new go to resin. Don't hesitate to try it because it's cheap.This print I attached was printed on the Anycubic Photon Mono 4k printer.

I print and paint a lot of figurines. On my elegoo saturn I get cleaner lines than with the elegoo resin. I normally use transparent green to get the best cure. I have been tweaking my settings but it is getting good prints. Not only does this resin give great prints it is half the price. This my become my goto figurine resin.

This was really good resin and the price is right

The media could not be loaded.  This resin can work! I never pass up cheap resin. I originally got skin tone and like others it had globs of resin in the bottle. I think whatever cause this did affect my resin but not greatly just minor fails easy to fix. I reordered with black no sludge, very happy. Still use a strainger just in case. Now i can't say it's this brand cause I have this issue with black in general but you gotta up the exposure. I have 2 different printers both have 65 sec base layer and then one can print fine at 3 sec (mono x) the other needs 3.5 (halot lite). Like I said though I tend to have to do this with black when I used the skin my exposure was 60 sec base 2.5 normal. Either way it works amazing it does smell but not nearly as bad as others. I'll come back and update my review since I've recorded the bundle with the white and black. I've attached my most recent prints with this product.

Great resin for fast and accurate parts. Make sure the part is completely dry of IPA/ water/ cleaning liquid before curing. It is not completely opaque black, this can be a pro or a con.

los soportes no se pegan a la base, otras veces se quedan a mitad, otras se quedan pegados al film hasta que, en un determinado momento, todo lo que hay pegado al film pasa a pegarse a algun soporte de la base y, cuando consigues sacar algo entero y sin problemas...resulta que lo lavas, lo pones a curar y cuando lo sacas...alla donde ha estado apoyado en la base de curado se ha aplanado, como si se hubiese derretido y vuelto a curar, llega sin fecha de envasado ni caducidad, sin datos de la resina (fluidez por ejemplo) lo que imposibilita saber si es un producto caducado, pero realmente da igual, es tremendamente inservible, inutil y una verdadera perdida de tiempo y dinero

Tiene un precio muy bueno y hasta ahorita no he tenido ningún problema con esta resina. Puedo imprimir a 2.5 segundos por capa en la Phrozen Sonic Mini 4K sin problema alguno. Tiene un poco de encogimiento o tal vez fue lo que quería imprimir, pero en general salen muy bien las impresiones. Definitivamente la compraría de nuevo si mantienen ese precio (~500 mxn, 25usd). Desafortunadamente van y vienen, así que no puedo estarla comprando continuamente como quisiera

Lo utilice en una photon mono e imprimió con excelente acabados, espero comprar otro nuevamente.

Muy buen producto, tiene bastante detalle, excelente producto por relacion precio-calidad.

Para mi es una súper oferta lo compré a un muy buen precio inclusive tengo conocidos que compraron hasta 10 piezas lo recomiendo las piezas son resistentes aunque con un olor fuerte pero compensa el precio