TCMT Quarter Fairing Kit Fits For Harley 1988-later XL 1986-1994 FXR 1995-2005 Dyna Models

This is a great product for the price! Blows harley out of the water with the price and looks awesome! Harley wanted over $400 +\- for essentially the same product. However, if you plan on buying this make sure to buy bungking mounts and Memphis Shade fairing Mounts (you need 4 of them and they are only sold in pairs so you need x2 of them and they cost $50 each thats an extra $100). Make sure you get the right size for your forks. Doing so will allow this to mount much better/flush-er. Also, if you buy this it’s a good idea to go to the hardware store and buy better hardware as the included hardware doesn’t feel sufficient enough. If you put it together you’ll know what I mean. Blocks the wind a bit like its supposed to, you’ll notice. Oh and if you buy the smoked version make sure to get a better headlight, if you don’t you have to run the high beam 24/7 to see anything. Last thing, be aware of the throttle cables, if the fairing pushes against them you can get a sticky throttle. I get it sometimes if i let off throttle but rarely. Just requires some adjusting. Just something to be aware of. Last picture for before and after

Didn't fit and doesn't come with the stuff you need to attach it.

Good quality and fit. Heavy gauge steel. I was able to weld a nice drain and fill port on it.

Be prepared to modify the brackets for 39mm forks. You can also buy the 39mm adapter plates made by Bung King. Buying the plates and this fairing still comes out much cheaper than the Harley version. The seller does not understand that 49 and 39 mm have different brackets not just different diameter clamps. I know this because we had a conversation. I have had multiple fairings like this over the years on 39 and 49 forks and the brackets are most definitely not universal to both. Just be prepared with your grinder or the Bung King plates if you buy it for 39mm. Still a nice fairing at a great price and would be 5 stars for me if they fit my 39mm out of the box

Very pleased with this fairing. Installed it on a ‘98 Sportster and it fits perfectly without having to make any alterations to the brackets. Used the Memphis Shades 39mm adjustable clamps (since it doesn’t come with clamps). I do recommend taking the brackets off of the fairing and mounting those to the clamps first to line them up on the forks. This made it much easier to line the fairing up straight on the headlight and then adjust the clamp/bracket assembly to match up with the second bracket on the fairing. Doable by yourself, but having an extra set of hands made it way easier to keep it all straight.

Had to fab my own top mounts to make it fit my forks but great nonetheless. 2008 sportster nightstand 1200xl

It is exactly as described and fit on my 2007 Street Bob with zero issues. I used Harley quick connects that I previously had. The issues came when I had to take the clear plastic shields off to get all the plastic they were wrapped in off. When I went to reattach the shield both top and bottom, the top one completely cracked the fairing on both sides where the screws went through. So do not whatever you do tighten the screws very much as it will crack the plastic on the fairing. I didn't realize it was cracked until I when to ride and the windscreen almost came off. Next when I attacked the bottom plastic over the headlight and went to tighten the screws, the one in the top left hand corner cracked the plastic and broke off the corner. I did not crank any of these screws down, I was just holding the little nut in the back with my fingers and using a screw driver. Just tightening like this cracked these. To fix I took pieces of aluminum strips and reinforced behind the screw holes on the fairing. I epoxied the aluminum strips to the back and painted them black to match. I am going to have to order replacement clear plastic wind screens as there is no repairing the headlight cover. All in all, the fit was great but the quality of the plastic is pretty horrible. I would have expected it to be much stronger considering the vibration and wind resistance this will have to endure. Pretty disappointed with the quality.

Super clean looking. A little dark so you have to get really bright headlights. Seems very sturdy as well

Exactly as shown and painted black gloss black on the outside

It actually had a gloss finish. I changed out all the fasteners with stainless. Good fit.

Good

Didn’t fit my bike had to modify. Screws all fell out basically within a few uses and you need the Harley mounts to quick attach which isn’t a problem if the thing didn’t fall apart so easy. Look great but barely works

I had to mod it too work but I guess its pretty not too bad. 39mm forks don't work with this, they lied