VIVOSUN 2-in-1 Grow Tent, 36"x24"x53" High Reflective Mylar with Multi-Chamber and Floor Tray, 3x2 for Hydroponic Indoor Plant

La carpa en buena, el problema es que tiene muchas fugas de luz por los zipper y la parte que divide el tent por dentro, se pega con Velcro, lo cual tembien deja muchas fugas de luz hacia ambos lados, si eso no te importa por lo demás esta bien.

2-n-1 grow tent. Assembled the tent in about an hour by myself. Would suggest 2 people to make initial setup go smoother. Instructions need an overhaul. Setup examples showing placement/installation of lights and air handling with the tent would be helpful. Nice heavy material, zippers are good, I could only find a few pin holes on the seam for the very poorly placed tool storage bag. This should have been placed somewhere else not in the middle of a sidewall. I will be removing this. Had to fight with several of the poles as hole alignment wasn't great. Duct holes aren't in great locations either. Separator for veg/flower area didn't quite fit perfectly, uses velcro to attach, however the frame poles prevent this separator from attaching in the corners and from blocking 100% of light from other chamber. Its ok but requires a user solution to make it correct. requires additional air handling for the veg/clone chamber. In my opinion, tent needs cross members for side walls in 4x4 chamber, with the air cleaner running the sides get sucked in. Although I'm pleased by how air tight the tent is, now there is less space for plants. The 3 screened air holes let in too much light, the provided covers have velcro on all edges. So its air flow with lots of outside light or less air flow and no light, Again user work around required or add an intake fan and ducting. Althought 2 poles are included, another pole for hanging equipment would be very handy, 2 poles for the light and air cleaner and fans is very awkward. No hanging support for lower section of veg/clone area. Would like to put some lights there but Not comfortable attaching anything to the wire shelf. Basically it's a good sized tent, with some design short comings, none of which are deal breakers, i will be using the tent mostly as a single tent vs 2n1. Despite my criticisms this is still a good value, i do like it, I would buy it again. I would buy this tent 60x48x80 vs a 48x48x80(vivosun) - only 20-30$ more for the additional space.

Assembly was pretty straight forward, although the instructions were really poor, actually sliding on the mylar was a bit challenging , however it was nice and thick and no worry of tearing. The middle divider wall was also a bit tricky and took a second person pushing outside the tent to fully secure down , but once in place seems pretty firm , overall i am satisfied with the thickness and quality of the tent at this price, no harsh chemical smells, and all pretty straightforward assembly. as for the Cons, although not many there are a few, for starters there were lots of loose threads i had to burn off, and the metal frame is rather weak, ive seen people literally hang off competitors frame bars , with no bend, but if i tried that it would collapse , that being said its not weak and can hold both the light and vent fan no problem , there were also light leaks around each zipper, and down each side of the tent in random patches, lucky i do not need it in a dark room , because if i did i would most certainly remove a star for light leaks, the front is actually rather bad , that being said i dont really have anything else to complain about , especially at this price point , id say the only difference between this option and say something 200 dollar more expensive would come down to a very SLIGHT increase in thickness, and thicker metal bars, if its really needed ... that is subjective Will update after first grow with more details!

Esta como se menciona en medidas un poco pequeño, y los paneles para separar las áreas se pega con velcro y una con la pura charola lo cual no se puede tener un total control.

So just in the last few months i've gotten myself essentially two full setups and so far, Overall for the price you pay for their gear and the sturdy setup you get for it the tradeoff, the money you spend on it all for the quality and amount you can get for a very solid price is most def worth it. Am going to be getting myself another additional tent that will be a 4X2X5 and I cant wait to be able to get it. I have the 2X3 MultiCompartment Tent and so far I am overall very happy. I had also gotten the 3X4X6 MultiComp One as well but it was honestly too large for my room I wanted to put it in if I wanted multiple to fit in a certain configuration but the small multi inside is honestly too small if you're wanting to be able to do multiple large plants. It would be perfect for a mother Plant with a Bunch of her clones or something like that then it's fine. But if you're wanting to do multiple larger plants with enough room for them really then get a 2X4x5 or larger you'll be happy you did. It's the best way to fit a lot into a narrow footprint of space it takes up opposed to a 4X4 or 5X5 But if you have the space for those then I would hop on those but remember, the larger you go the more money you have to spend on other pieces to accommodate the size. And best thing is, if you end up getting a really poor quality one which lets face it, will happen the odd time, you can literally return it essentially no questions asked for a new one and you'll get it, their customer satisfaction needs to be good to stand out in the market that's flooded with different companies trying to make their name in the grow tent game. The stitching is a little bit messy in some places the odd time but overall you get a great quality tent for the price that is for sure, paired with their customer service, you're set!