No Disassembly Tablet Holder for DJI Lito 1/ X1/Flip/Neo/Mini 4K/ Air 3/ Mini 5/4/ 3 Pro, 7-12 Inch Foldable iPad Mount Holder Pack of Lanyard and 2 Cables, Fits DJI RC-N1/N2/N3 Accessories

Good product because works well, very easy to install and use, my iPad fits perfectly with no play or any movement. Cords are long enough to reach so no complaints. Just be nice with it. I LIKE!

I had my doubts when ordering but this is quite an ingenious piece of work. It was simple to install and use by viewing the pictures and video displayed on the Amazon page. Fully assembled, the controller still fits in the bag that came with my Air 2 Fly More kit. My 9th generation iPad fits easily and appears to be held securely. I tested operation with both included cables using both my iPad and my Android phone and they both work. If I offset the ipad, even the short lightning cable that came with the DGI combo kit reaches giving me an emergency spare cable. Caveat: when the mount is closed and folded over the controller it seems a little stiff to open. You will want to open it carefully pulling slowly from both sides. This is just a precaution as it may be fine and even loosen with use but since it is plastic it is better to use a little care. Disclosure: I have not used it to fly extensively. All I did was take off indoors for a short while and checked operation of the flight sticks. It was REALLY nice being able to use the big iPad screen rather than the phone. Summary: Based on my initial test use, I’d buy it again in a second. It is an impressive product at a bargain price.

Works pretty well as it holds either phones or tablets, snug so they won’t fall out.

...With minor modification. Needed an accessory kit for my Skyrover X1, but since nobody makes a dedicated setup for it yet, I had to look around for something that might be improvised. I guess I got lucky, because with only a few minor modifications, everything now fits and functions properly. Only needed to enlarge the two slots and shave a tiny portion off the actual remote phone mount. Cords appear to be decent quality and the lanyard is a very soft and pliable material with a nice spring loaded clamp. Would recommend to anyone looking for accessories for their Skyrover X1.

I switched from using my phone to a Galaxy Tab S6 Lite because I was having a hard time seeing the screen clearly, especially in bright light. The bigger screen made a difference right away. I’m not squinting or guessing anymore. I can actually see where I’m flying and what the camera is doing without fighting the screen. This holder is what made that setup work. It attaches without taking anything apart and holds the tablet in a position that feels natural while flying. Now, if you’re using this with a SkyRover X1, there is one thing to know. It does not fit perfectly out of the box. I had to do a small modification where it attaches to the antenna. I used a Dremel tool and widened the slot on the top and bottom so it would clear the ridges on the SkyRover controller. The DJI controllers have grooves that line up and lock in when you tighten it down, but the SkyRover has longer ridges, so it doesn’t seat the same way without opening that slot up a bit. Once I made that adjustment, it fit and held fine. I also noticed the added weight with the tablet mounted. You feel it pretty quickly in your hands. Using the included lanyard takes that load off and makes longer flights a lot more comfortable. I also paid attention to how that weight sits above the antenna since everything is mounted up there. Overall, this has been a solid upgrade for how I fly. Being able to clearly see what’s going on makes everything easier.

Worked great for my DJI Drone needs. I can use with my iPhone or iPad with the included cables. I really like to use the iPad with in when flying my DJI Mini 2 Drone. It so easy to use with the larger screen not having to use my reading glasses for they flight spec numbers. Just don't forget to have the neck loop handy. Easy to clamp on and to hook up your phone or pad, has cables for Android Devices too!

Does not fit the SKYROVER remote so I had to return it. Good quality product

Works terrifically with my DJI Mini 4 Pro controller and a Samsung Tab A9 which is 8.9 " wide. The beauty of this device is that it would work as well with my Samsung Galaxy S23+ phone or with my Samsung Galaxy Tab S8+ tablet. I choose what screen size I want to use. Easy to install. I will admit that I have not folded it down to its smallest size because I typically use it with my A9 and I don't want to remove and then replace the tablet. Seems sturdy, so this should be the last time I get a pad/phone holder for my Mini 4 pro.

works perfectly for my 10" samsung galaxy tablet. very stable, great product! now i can watch my drone through a giant screen. its amazing.

Great product. Works well with my iPad Pro.

An excellent bit of kit. I bought this tablet holder so that I could use my Samsung Galaxy A9+ 11" tablet with the RC-N1C controller for my DJI Mini 4K drone. It was worth every penny. There is a secure clip that fits onto the RC and the lanyard clips onto it. The tablet holder itself is attached to the pull out antenna. It is held in place by tightening the screws in the double clamps at the base of the holder using the supplied hex screwdriver. This does not damage the RC antenna in any way, nor interfere with the signal. You can fold the tablet holder down over the lanyard plate. It looks like the designers have listened to previous comments, and made a hole to go over the lanyard loop. Unfortunately, with the tablet holder connected to the RC, even when folded down, it won't fit in my custom, form-fitted foam tray in my carry case, so I have to remove the tablet holder when I want to transport it. Overall, I am happy with how it performs. The quality of the material is great. It matches the colour of the DJI remote exactly. It is strong and sturdy and it holds my tablet firmly in place, even with its protective case on. It doesn't overbalance the RC that much, and I love having the bigger screen when it comes to piloting my drone and capturing amazing footage for my Facebook and YouTube videos.

Complimenti, era proprio quello che cercavo! Avendo un iPad e un tablet abbastanza grande, questo adattatore FPVTOSKY per il mio drone DJI mi ha permesso finalmente di usare uno schermo più ampio, rendendo l’esperienza di volo molto più comoda e precisa. Nella confezione sono inclusi: • Un laccio da collo, molto utile per sostenere controller e tablet senza affaticarsi durante l’uso • Cavi più lunghi sia Type-C che Lightning (perfetti per Android e iOS) • Chiavi a brugola per il montaggio Il montaggio è davvero semplice e veloce, non serve essere esperti. Arriva anche un affarino nero per attaccarci il laccio, però quello l’ho perso😅 comunque La qualità generale è buona e una volta montato risulta stabile anche con dispositivi più grandi.

commande arrive très rapidement et conforme a mes attentes