QSPNeckmuk Neck Knife, 2.87" D2 satin Blade Small Fixed Blade Knife with Kydex Sheath, Black G10 Handle EDC Full Tang Neck Knives for Camping, Outdoor, Hiking, Survival

:}{o}{: :: QSP ~ NECKMUK :: :}{o}{:The 6.5” QSP Neckmuk neck knife features a 2.875” D2 blade with a full flat grind and a satin finish. The blade stock is 3.5mm thick by my measure and 1” wide. It has some fun thumb jimping on the spine for added control when slicing. Extra sharp D2 steel (HRC~60) produces a hair thin edge capable of cuts both great and small.This knife has that distinctive Nessmuk blade shape, which is a little like a drop point but more like a sheepsfoot with an upswept cutting edge that creates and interesting shaped belly for the knife. The shape of the blade coupled with the full flat grind makes this blade a formidable slicer. And the spine tapers all the way to the point so this knife can absolutely pierce things too. about the mythical Nessmuk blade here:[ https://www.knivesillustrated.com/the-nessmuk-ideal-a-knifes-history/ ]I actually like the 3.5” duck bill shaped handle (I’ve seen similar handles elsewhere sold under “duck” titles so thats what I’m calling it)… The index finger well extends the gripping area to 3” (across the 3 finger wells) and acts like a guard, while the “duck bill” contouring between the ring and pinky finger acts as a sort of rear quillion for added security. The duck bill portion also extends the handle a bit so your pinky finger can wrap around it; if you include this region the gripping area becomes 3.75”.Although the thin handle (0.4”) is only contoured for 3 fingers, the balance point is proper and the blade feels secure in the hand. The finger wells are deep enough but they are not OVER-contoured so you can actually hold the knife in more ways than one… For example the CRKT Minimalist series has much deeper finger wells, which are unappealing to me as I want to do more than just fist my knife…The rather basic kydex sheath and a weak ball chain necklace will probably require modification, however, there are grommets on both sides, so a belt clip could be attached to this sheath in ambidextrous fashion. With a clip you could carry this blade cross body, scout carry, vertical side carry, or even as a boot knife… I don’t suggest the neck knife option as the kydex on this knife is contoured but not very tight nor secure. I would not trust it dangling upside down. I plan to attach belt clip to it so I can wear it cross body on my waist. We’ll see how this knife fares…This is a weird looking neck knife but I really like it as a whole… it’s a lightweight lil slicer although it feels a little big for a neck knife… makes a better boot knife (but you’ll have to buy a spring clip separately, try the Cold Steel Small C-Clip sold 2 for $5).At $40 this Neckmuk is cheaper than the Condor variety of Nessmuk blades. Plus this is D2 Japanese tool steel (HRC~60) so you’re also getting higher quality steel for this price point than you would get with a Condor Nessmuk knife. Just be sure to wipe clean and periodically oil your D2 (I just use mineral oil).What a steal for such fine steel !Thanks QSP Knives ! ^_^[ UPDATE: Adding a belt clip for ambidextrous vertical or horizontal carry options ]I used the following to create belt clips for this knife:1) Cold Steel brand Small C-Clips: [https://www.amazon.com/gp/product/B07N6X568N/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1]2) Screws & spacers made for kydex sheaths: [https://www.amazon.com/gp/product/B01C6AC25C/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1]I used both clips for additional integrity, since these Cold Steel clips are just plastic and not metal.I am right-handed and have installed the hardware for cross-body draw (worn horizontally and drawn with right hand).BONUS: The additional belt clips have added pressure to the kydex sheath and the knife is now VERY secure. I am no longer worried about the knife coming loose. In fact, I have to use two hands to draw and sheath the blade now.Highly recommend adding a clip or fixture of some sort to make the sheath fit tighter.[ UPDATE: Adding paracord for better grip ]I was first tempted to take the scales off this knife and wrap it in paracord but then I said why not over the scales?Used 7 feet of 550 paracord to bolster this handle with some extra meat, providing both cushion and grip.Went with a 360 degree strider wrap with the twists on the sides where the scales are in order to create more of a palm swell for my hand.Turned out great !Highly recommend wrapping your blade in paracord too.Just be sure to wrap the knife while in the sheath not only for safety but also so you can still draw and sheath the blade after you put the cord on it.

Why did you pick this product vs others?:The price is mostly why I choose this knife, and I'm super happy I did! It's now part of my EDC, I don't go anywhere without it honestly.

QSP stands for Quality•Service•Price, and that has been my experience.The unusual looking handle provides excellent control when doing food prep. The blade thickness is an excellent compromise between sturdiness and slicing ability.

My first QSP knife, and it did not disappoint. Well built and sharp right from the factory. Handle ergonomics are perfect for my hand size. I’ve used it from food prep to breaking down Amazon boxes.

The price is right, the handle is comfortable, and the blade is relatively sharp. Sharpens easily, holds an edge OK, and fits the sheath well. I think a paracord would be better than the chain, but that is just personal preference. About as big of a knife as I would want around my neck before it started getting in the way of everyday tasks. The trade off for that is a blade big enough to be useful, and an handle big enough to actually get a good grip on.

I really like this knife, I actually attached a piece of leather to its case with Chicago screws to scout carry it, ive had it and been carrying it for about 2 weeks and I'm really impressed at how well qsp did on their heat treat of the d2 steel it's held an edge extremely well and as a mechanic im pretty hard on knives, along with my other hobbies it's held up extremely well, which surprised me bc of d2's reputation of being brittle...I didn't think much of the handle when I was buying, really thought it would be one to be in the knife drawer in short order, but its actually very comfortable and it allows for a very firm grip without the risk of slipping, I gave the ergonomic rating a 4 as it probably won't appeal to more than a few people, but id try it out, I typically hate knives that dictate exactly where I need to put my hand/fingers (i have some pretty large hands and those type of grips usually do not fit hand right making them very uncomfortable to use), but the only downside I see with this one is if you had to use a reverse grip for some reason, the handle is very grippy as well and the fit and finish is far beyond its price point, no sharp edges on the handle, the scales fit up nicely to the tang of the blade, flush finished screws, nothing sticking up to be uncomfortable there, blade finnish and shape is great for utility work and while i havent had the chance yet, the blade shape will probably lend itself well as a skinning knife, using a pinch grip for control...strongly suggest this one, qsp outdone themselves on the neckmuk

Great little knife

Good quality steel, the knife holds its edge very well, and arrived with a good edge.