A-M Gutter GuardAluminum 5" (50 Feet, Mill Finish)

Instructions are good, install is pretty easy. You do need to do some bending to get it to fit in some spots since your eavetrough will not be a perfect install. I like the way the water will not flow over the top of it. It sits down in the eave trough and drains into it. I can see leaves and tree debris sitting on top, drying up, and blowing away. Super easy to cut and bend to shape as needed.

El producto requirió una devolución, el producto parecía de muy buena calidad sin embargo no era lo que necesitaba, el proveedor se portó muy amable y pude devolverlo sin ningún problema, agradezco la comprensión del proveedor

It was really simple to install and cut. Great product ...will see how it handles downpour and snow.

Gutter guards work great and easy to install. If you're gutters are old I recommend buying new hangers to straighten them out and ensure they are the correct width. These guards use friction to hold the back against the house, so if your gutters are stretched out they might not fit correct. The hangers will pull gutters back to the correct width. I used the AM hangers, but you can use any in gutter hangers that are the width of the guards you by.Easy to install buy yourself and doesn't take long to do so. I was able to install roughly 160ft of these in 4hrs by myself. Corners can be a bit annoying due to the shape of the guards but a couple of screws into the guard will make a tight fit.

This is a high-quality product that should last a lifetime. I replaced cheap plastic gutter covers (which were a waste of time and money). Here are a few tips I pass along to anyone buying these aluminum A-M Gutter Guards:1) Be sure to measure the width of your gutters before ordering. Common widths are 5" and 6", and A-M Gutter Guards come in both sizes.2) Make sure you have 1/2" #8 screws for fastening your Gutter Guards to your gutters. I ordered A-M's screws which are high-quality stainless steel: https://www.amazon.com/dp/B0BS1SS1HT/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B0BS1SS1HT&pd_rd_w=sY2IA&content-id=amzn1.sym.386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_p=386c274b-4bfe-4421-9052-a1a56db557ab&pf_rd_r=Z84BEKWZ22JAMZZ3WQ4H&pd_rd_wg=8PRib&pd_rd_r=94c24806-8db5-44e3-9fd8-712288612a39&s=hi&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM. These come in packs of 100, and include a handy magnetic hex driver. Order more than you think you'll need.3) Inspect your gutters to see if your gutter hangers are adequate and were installed properly. Mine were not, so I replaced all of them with these: https://www.amazon.com/dp/B0D4YYTCVG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1. Gutter hangers should be installed every 2' to 3'.4) Wear gloves when installing Gutter Guards because the end edges are sharp.5) Make sure you have a good pair of tin snips so that you can easily cut the Gutter Guards for ends and corners. Here are some good ones: https://www.amazon.com/Hurricane-02-024-Aviation-Straight-Vanadium/dp/B07GDDF5JB/ref=pd_lutyp_sim_d_sccl_1_5/131-4446041-0097649?pd_rd_w=YWkik&content-id=amzn1.sym.b8b868ca-6e8c-4d73-baee-a5f1d4790b6a&pf_rd_p=b8b868ca-6e8c-4d73-baee-a5f1d4790b6a&pf_rd_r=XPB4TB5TFM1CCPBXQJJ0&pd_rd_wg=7oHni&pd_rd_r=7be69376-6f7f-4a9b-b391-c515e190cfd2&pd_rd_i=B07GDDF5JB&th=16) A-M Gutter Guards has short installation videos posted on their Amazon page which I found to be helpful.