400 Point Solderless PCB Breadboard: Quantity: 1 Pc Dimension: 8.3 x 5.7 x 1 cm Breadboard: 400 tie points (consisting of: 300 tie-point terminal strip, 100 tie-point power distribution strips) Wire size: Suitable for 20-29 AWG (0.3mm - 0.8mm) wires MB-102 Breadboard Power Supply Module: Quantity: 1 Pc Input voltage: 6.5V - 12 V Using DC Barrel input or 5V using USB Output voltage: 3.3V / 5V selectable with jumpers Maximum output current: <700mA Two channels of independent power control Size: 5.3 x 3.2 x 2.5cm Battery Snap to barrel Power cable: DC power supply for breadboard power supply, allows connection of a 9V battery or other battery packs (sold separately) Note: Do not use both USB and Barrel power inputs at the same time The green LED indicates the presence of power, and an ON / OFF latching switch is used to control the power to the board. Push the switch IN to energize the output pins. The input voltage through the barrel socket must be between6.5 V and 12 V. This is a non-adjustable fixed power supply, which is good for most prototype applications. Jumper pins are utilized for selecting the voltage levels on each side of the breadboard power rails. You can choose between 5 V, OFF, and 3.3 V. There are two sets of jumper selectors for each side of the breadboard power rails. You can use any combination of voltages on either rail. There are also header pins for tapping off voltages, using a cable or jumper wires. This is a plug-in power supply and the header pins below the board simply plug-in to the breadboard. Once plugged in, the voltage rails to both sides on the breadboard then provide power.
Trustpilot
1 month ago
2 months ago
