408C Rubber Renue, Rejuvenate and Restore Rubber Belts, Platens and Rollers 125mL

Yes, it's very expensive. But I took a chance and bought it to refurbish the pinch rollers on my 50-year-old Sony TC-788-4 reel-to-reel tape deck. They were glazed, shiny and hard, and would not move the tape correctly. I did two rounds of applying the Renue according to the instructions, with a good cleaning with alcohol after each round of Renue. I got a LOT of black residue off, so I knew the Renue has opened up the rubber surface. Afterwards I did a very light scuffing with fine grit sandpaper. The capstans are now a nice matt color, and they are working nicely. Be sure to use this stuff outdoors or with an exhaust fan; it's very volatile. I wore nitrile gloves. I should have used an eye covering because my eyes watered for a day after using it. After closing the jar, I put it in a thick sealed plastic bag to help contain the fumes. Just be careful, but the stuff really works.

Shiny rubber tape idler? This will fix it nicely, unless of course your wheel is worn out. I used on my Akai 4 channel reel to reel and brought it back to life. The cleaner will re-rubberize (?) all the worn/slick/shiny wheels that drive your tapes.

I stored it in a cup holder in the console of my car actually just left it there for a few days and didn't notice that the top wasn't on tight some of it leaked out of the bottle and damaged the plastic around the cup holder. A great product just make sure you don't let any of it leak out on anything or let it get any place you don't want to use it.

I purchased a couple of roll paper note pad things that were probably manufactured back in the mid 1970's. They have a small rubber wheel that feeds calculator roll paper onto a writing plate. The rubber wheel has dry and would not grip the paper. Used this 408C Rubber Renue product on the wheels and they are actually almost like new. Grip the paper just fine. All I did was paint the product on the wheels with a small artist type paint brush. Let it set for a little while and wiped off any excess. I believe I applied 2-3 coats. Great stuff and glad I found it. Would definitely purchase this product again.

I was skeptical at first when I read the reviews of this product. But it vastly improved the platen on my 60's typewriter, the Hermes Baby's platen into a supple and dull looking platen like it was just replaced. Mind you, I only applied 1 coat for now. It seems to get absorbed by the platen almost instantly when it is applied. So multiple coats should penetrate deep into the platen to make it softer so each key type should become more pronounced. Awesome product, recommened for those that have vitage typewriter that has dried out platens that are rock hard. Be sure to apply it in well ventilated area. Smell is similar to Ben-Gay topical cream. CAUTION: Be sure not to get any of the stuff on plastic or it will start to disintegrate it. Best to take the platen out of the assembly or anything that's not rubber.

I have used this on old power cords/harnesses for a while and I love it. It cleans and brings life back to cords that would otherwise be cut off and replaced. It has saved the original power cords that had gotten stiff with age on several of my vintage stereo receivers. It also made the harness on my vintage 1959 boat look like new. I cannot praise this product enough! It does have a distinct smell but it isn't a strong chemical odor like you'd expect - it smells like peppermint which I find quite tolerable, but I don't recommend hanging around and breathing it long term..it is still a chemical after all..

this product is apparently not the one written about in the current (december 2025) description - it contains no chemicals - the current formulation is wintergreen and isopropyl alcohol, neither of which are particularly good for rubber, as far as i know. it is possible that 408A is the original product and 408C is the less toxic alternative. unclear why you would need to charge $28 for those two ingredients, though. amazon provided a refund, but beware that these chemicals generally come with a "no return" policy.

This works well on equipment with rubber wheels that are worn and replacement wheels hard to find and/or replace. The smell maybe strong to some but it dissipates pretty fast.

Definitely brings back grip to pinch rollers, idlers and paper rollers. I have several cassette recorders with no rewind and/or poor take-up reel performance. Rubber Renue takes away the shiny, hard surface and leaves a grippy, compliant rubber face that makes the deck work as new. The other alternatives are replace the rubber parts (super expensive) or junk the machines. However, the product smells very minty and even in a closed bottle, the minty smell seeps out. So I keep it upright, in an air-tight box. This is my second try at buying Rubber Renue, the first attempt was left outside on my doorstep on a 35°C day, upside down and naturally, following the laws of thermodynamics, the product leaked out, I estimate around 1/3 of it leaked out. Returning it was a laugh, the minty stink stunk out the post office and they were concerned when I dropped off the package wearing gloves, the MSDS would definitely preclude sending this product, leaking, through the post (or should I say Evri)

A redonné de la qualité ey de l'élasticité au pinch roller de mon revox. Super.

gut

Works excellent for sorting old shoe soles. Used this on a pair of 1989 Nike’s and they worked excellently, not a permanent solution but certainly helps and was worth the money compared to the alternatives to fixing them. Be careful with this though as it absolutely stinks and made my house smell like a doctors office for a good few days. It also strips any colour or paint so be careful where you apply it.

Put some of this on my brother printer that would always jam. Now the rollers pick up the paper properly and its given new life to the printer.