20 Sheets Waterslide Decal Paper INKJET CLEAR,8.5X11 Inch Water Slide Transfer Paper Transparent Printable for Tumblers,Ceramics,Plastics,Glasses,DIY

للاسف الورق لا يتشرب الحبر السائل انها لا تعمل مع طابعات نفث الحبر يبقى الحبر غير ثابت

Great white decal sheets

The clear film that forms the transfer is too thin and breaks up when trying to slide it off the backing

I mean its waterslide paper. These worked just fine for me.

This product has excellent results, once you get the hang of it. I ruined most of my first package with Trial and Error. Important things to note: 1. You MUST do at least two good sealant coats BEFORE transfer or it will disintegrate in water. 2. Do not print multiple pages without removing the previous page from the printer. The ink takes time to dry and will be ruined by the second sheet sliding over top.

Ease of use is dependent upon your skill level and the final result is also dependent upon the quality of your digital media. Preparation of the decal for transfer is critical for a successful outcome. I used Tamiya TS Spray Clear to seal the ink which worked very well with the decal. I started with 3 very lite (dust coats) before applying 2 heavier final coats. Micro Sol works very well with this decal film. Once you brush on Micro Sol, leave it alone to work. It is normal for the decal to potentially wrinkle or distort while in the curing process and many people make the mistake of trying to tamper with the decal as it is curing. The decal will even-out once the decal sets and dries in most cases. You may need to add another coat or 2 of Micro Sol, especially when dealing with complex curves. The end result hid the edges and gave a painted-on look for a vibrant, crisp outcome. The decal thickness is just right, making the transfer easy. I had no issue with printer compatibility with my HP Inkjet Printer. Care must be taken during transfer so allow yourself a few minutes to let the water absorb into the decal backing before transferring keeping the decal as close to the subject matter as possible to avoid trapping air under the decal. This decal paper slid off the backing with plenty of adhesion. Do not over-soak your decals. I recommend using a little hand spray-pump from any dollar store to apply water to the decal. Adding a small drop of dish-washing liquid to the water is also recommended. A final coat of an appropriate sealant will seal the deal. Good luck and have fun.