BLACKHAWK Omnivore Multi Fit Non Light Bearing Pistol Case, Right, Black, One Size

The universal adapter system is pure genius, I don't need to spend extra money for a light or get a holster per pistol. Plus you get 2 adapters in the kit and I love it! Fits everything you put in it, secure and surprisingly really good quality. Very good value for sure.

This review is in reference to the Walther PDP 4.5" and this holster. Although it doesn't state in the description that this firearm doesn't fit this holster, I called Blackhawk directly and they said that it would. After receiving it, I went straight to putting the firearm in and it didn't fit. So, I swallowed my pride and read the directions lol. It needed the supplied rail attachment put on the firearm for it to fit and lock in the holster. Thumb release feels great and releases good. Thumb release also comes with height extenders for different size firearms which was a very much appreciated thing to include especially for my firearm. After that, it fit and worked great. So in point, if you have a full size firearm WITH A RAIL, this holster will work for your firearm. Very rugged looking and feels like it. Overall,, I am very pleased with it and glad I bought it. Mainly bought it for August 16th when open carry becomes law in SC. Hope this helps and carry on. *pun intended lol*

Obviously there are better out there but if your still trying to find what you like it is definitely good for all pistols I've used on it and holds up well to mud and forest environments.

NOTE: I'm giving this 4 stars because a coworker has the 'light version' (streamlight/surefire) and loves it and handling this I think it's an awesome concept. However, I have to return mine... This is an AWESOME concept, but you need to have the right weapon for it. I tried a Beretta M9, FN FiveseveN and XD-M 10mm. Beretta and FN both I could not get the rail adapter installed at a point where I was properly satisfied with trigger covering. XD-M worked with no problem, however it being a 'medium size' this holster is much larger than needed (not a real issue, as it's held firmly in place, but I want something a little smaller for the smaller handgun). Not getting anything to properly fit (to my satisfaction), I did not properly test the security or ability to adjust the angle of the holster. A few notes about the information provided by the vendor: 1) Features & Specs state "Closure type: Hook and Loop", there is no hook & loop. 2) This holster comes with BOTH the belt and paddle mounts. 3) This came with TWO of the 'rail adapters' you need to allow use of the holster, so you can do two pistols. I am planning on ordering one of the supported rail mount lights and will try the Streamlight/Surefire version at a later date.

Good fit and operation.

I got this holster for “range” use where a course required an external holster. Rather than start a holster collection for each gun this seemed like a good option. For non-critical use it works fine. It “universal” aspect comes from the way it works. It comes with this plastic module that you screw on to the rail of your gun. This is what it latches onto to hold the gun. So pretty much if you have a rail you can use the gun in the holster. I personally used it for a S&W M&P 2.0 compact. A M&P 22 compact and a Kimber TLE II/TFS. The fit is generous so larger guns or those with suppressor sights are not a problem. If your gun has a longer rail you have some degree of adjustability in it. The unit has a thumb break retention. You can adjust the high of the level by screwing spacers on it. There are 3 settings for tilt (cant), zero, low and medium cant. The cant can be forward or backwards in its tilt. It comes with a LARGE paddle attachment as well as a belt loop attachment for wearing it. It comes with two attachment modules and two additional thumb break spacers. So overall you get a lot of flexibility for not much money. Where this holster really shines if you have something other than a Glock or an absolute standard issue mainstream pistol and you have not been able to find a holster for it. With this as long as you have enough space on your rail you can now have a holster. Its downsides might be outweighed by the fact that you have something! For range/hunting/general use I think it works pretty well. But for critical applications it has a few downsides that would leave me looking elsewhere. First off is that the fit is very gun dependent. Depending on your gun you might have a gap between the holster and the trigger guard, trigger not fully covered which is a no-no in grabby environments. When you pull the gun or return the gun into the holster you really have to get the angle right. Other dedicated holsters guide the gun in and out smoothly, this one does not. If your not focused you’ll be poking at the holster to get your gun back in or yank it out. Third the release mechanism isn’t smooth and doesn’t install confidence. To be fair I’ve never had it fail and when I’ve had to fight it its because I wasn’t pulling at the perfect angle, but do you really want your holster to require that perfection in a critical moment? Finally the fact that it requires a module to be screwed on does limit things. I can’t take the same gun and throw it in the holster, pull it out, put it in another holster or slap a light onto it. Conclusion – A cost effective holster that will fit just about any railed gun for general use, really good for less popular models of gun but it has its flaws for critical duties.

secures firearm fits many different types of guns I have put in Sigs, Glocks, PSA Daggers. easy to use and install on any battle belt or range belt.

TOP QUALITY!!!!

Great product for my pistol with a mounted torch

Oh god what an amazing and beautiful piece of gear, made by the tactical gods themselves it seems. This thing for a level 2 retention holster holds that damn gun like your wife holds onto your every mistake. Also let’s not forget the adaptability of this grail made of kydex, I’ve got the two attachment rail brackets on my colt 1911 and beretta 92sf. Both guns fit well and perfectly lift from the holster without snags. Pulling out and putting in to this holster feels just like getting dirty with your woman after a long day on duty. Let’s not forget the two types of belt mounts it comes with, one to slip onto any dress or duty belt with ease and another to have permanently affixed on a duty belt (in my case it is). Taking this to the range is like bringing your new hoot of a girlfriend to a bar filled with single men begging to get their dried up manhood re-saturated by a women’s bodily fluids.... It just doesn’t come with any tools so make sure to have a screw driver handy but if you’ve got a misses that always makes you bring the protection at night, then you’ll be fine. So overall, good holster.

FNX45用に購入、問題無く使えます。 マイクロプロサイト搭載でも問題無いです。 銃のホールド具合も裏のネジで調整出来ます。 レイル付きのハンドガンを使い分ける人はこれ一つあれば良いのでは？と思います。 追記 デューティベルトループに取り付けようとした際、付属のネジでは長さが足りませんでした。 同じ条件で使われる方は、ユニファイ ネジの♯8、32×1/2インチのネジを同時購入されることをオススメします。

Works well. Great backup or range holster. Does not fit safariland mounts so if u want to drop it lower you need the Blackhawk mid or low ride mount

レールがあれば大体のハンドガンに付けれるんでめっちゃおすすめです。ただ説明書に日本語ないです