Westfield 3D Solutions CPAP Hose Holder - Tangle-Free Design for Bed & Headboard, Perfect for CPAP Machines, Doubles as Mask Holder, Sturdy CPAP Hanger, Ideal for Home & Travel, White

I’m a CPAP user who was looking for some type of simple hose management. I was using a velcro & alligator clip type doo-dad on the bottom sheet and didn’t really care for it. Yeah, it worked but sometimes came apart. I love this little hack since it doesn’t interfere with my home decor and make my bed area look medical-like with a pole sticking up at the head of the bed (reminds me of an IV stand). I didn’t mount it on the wall but on the side of the headboard and it works brilliantly. Believe it or not it holds two hoses as I use one with Bleep with a MedLock magnetic system and one with the N30i or Evora nasal mask. I just unplug the ClimateLine hose on my ResMed AS10 for Her and plug in the other one. Again…what a simple, non-intrusive, non-medical/clinical looking hack. Big kudos to the inventor.

I was hesitant to purchase this, as I did not want to damage my wall, however, the sticky used to adhere to the wall comes off very easily and leaves no mark. My husband is very happy with how this clamp holds the CPAP machine. The holes used to run from his bedside table to his face and the tubing pulled the mask down. This clamp holds the holes higher so the tubing is not laying on his face nor does it pull. He’s even able to sleep on his side, which is something he was unable to do when the mask/tubing was attached to his bedside table

This is a better idea than the double hook model, because it allows the hose to shift without falling out. It appears to be a 3D-printed piece, but great design and works well for me!

I like the concept of a hook to keep the hose out of the way between uses and holding it up while I use my CPAP. I thought this hook would be nice with the velcro strap to hold the hose, but I found that it made it inconvenient to remove the hose whenever I cleaned it. I ended up getting a hook that the hose just hangs from, which is easier.

This item is so easy to install. It is 1000 times better than a metal stand that is constantly falling and pulling the mask off my face.

Its unsightly on the wall above my bed, but its super effective in hose control and helps me keep my mask on longer.

This product, by design, is an amazing idea. However, after the very first time I needed to take the hose off for cleaning……now it just falls off the bed where it was mounted. The 2 sided tape is great, but the way the two mesh together has never worked since. Really stinks. With the 3M tape, I assumed this was never going to be taken off, so I applied it directly to a part of my bed that made everything align well. After the first night of it falling almost immediately and then throughout the night 👻(scaring me to death the firat few times) It hasnow just sat in used. As I said, the ta9e is great, it will be there 50 years afteri am gone. If you are going to use this product, do not use it as a removable holder. Fit the holder directly to the bed and it will last forever.

Pros: I like the design. This plastic holder consists of two parts - a plastic hook at the bottom to hold the cpap mask during the day and a velcro strap to hold the tubing up above the pillow without a stand or other "medical" type of apparatus. The holder is stuck onto the side of the wooden headboard with removable foam tape. So my review gives 2 stars for design. It is simple and works well - now that I fixed it.Cons: The holder has holes in case the user wants to attach it to the wall with screws. I like to make sure that everything I do will last. Towel racks get attached to studs in our house! When I tried to attach the holder with screws, I first had to smooth a irregular/rough hole. While I was doing this, the holder split right down the middle! NO picture of this - sorry. But I got out my epoxy glue and glued it back together. The holder was printed on a 3D printer of very brittle material. If this one breaks again, I will have my son in law print another one on his 3D printer! So far the tape is holding it to the headboard.

I use it mostly to prevent my hose from pulling my CPAP off the table when I toss and turn. I used to wake up to find my CPAP stuck upside down between my nightstand and mattress, no more.Holds tight and steady!The hook to hang your mask is just a bonus!

Really simple but effective. Easy to install and does a good job.

This is the greatest little gadget to hang your cpap mask and hose on. I had a hole drilled into it with a screw nail to attach to the side of my wood headboard. No more cpap hose laying across my neck or getting caught between the headboard and mattress. It comes with a sticky tape but I didn’t want to chance it falling off. Love love this item

As the titled says, this item is over-priced for my tastes but it is a very good solution for most peoples problems with a hose that tends to get in the way.Those little stands that are supported under the mattress just look foolish and remind me of an IV stand in the hospital (and I'll be seeing those soon enough), so these are the best alternative out there.I used to just hang my hose over the headboard, but sometimes it would get caught over the corner (long story, not worth getting into) and cause me some discomfort in the night. But this however allows me to hang it along the side of my headboard, where it can move freely.For those that don't know, the 3M tape can be removed and reused if you pull on it slowly and steadily. It will remove cleanly, retain it's stickiness, and be placed elsewhere as if it were new. Just make sure wherever you stick it initially, and everywhere else you stick it down, must be clean! And Pledge is not a good cleaner, it's more of a protectant. Just use an alcohol pad or even Windex if you have to. Otherwise the tape is going to retain every bit of dirt and dust that was on whatever object you stuck the tape down on.Do the same for the plastic piece with the hook in it.And once you have both pieces with tape on them, press them straight together until they lock or "click" together. This isn't Velcro as that has a softer texture and doesn't hold as strongly. This is tough plastic hook and loop locking plastic on both sides. It should make an audible sound as it snaps together.This will hold firm and be a little difficult, but not impossible, to remove if installed properly. If you cannot get it to install properly, then that is on you. Watch a YouTube video or something prior to using this kind of 3M tape.I'd give it 5 stars, but I just think it's over-priced for what little you get. I needed it though.

Fabriquer avec des matériaux de qualité et fonctionne très bien. Très facile d'utilisation.