eSUN Light Weight PLA Filament 1KG, Low Density for Model Airplane,Natural

This is some great foaming pla, printed very easy for me on my bambu using regular pla profile slowed down to 80mm/s nice lightweight parts produced, BUT I found the finished product to be much too brittle for larger scale RC planes, but this is purely on my experience printing a foxbat and f15. I can see this being excellent for simple planes and gliders, but I needed something with a little more strength but deffo worth a go. Would buy again but not for my current project. I've found the colorfabb lw pla the best and strongest for my needs, but that's just me

Currently building a 3d printed plane with this stuff. Tuned in the settings, with some help online, and the print quality has been superb. The plane is nearly complete and I've used so little. This will be my go to for future projects.

Prints quite stringy so far but makes very light models perfect for drone bodies etc just be aware you can crash the prints in your palm

This was my first try of light weight PLA and am very pleased with how well prints with this turn out. Layer lines are virtually invisible, prints are strong with no layer delamination and prints are very light. It has more of a foam like feel and texture so would not be any use for projects requiring high strength but is ideal for model aircraft. I used it to print a EDF RC jet for a friend and it turned out great. There was some stringing on the internal structure but this was probably due to my settings not being fine tuned rather than a deficiency in the product. As mentioned this is the only Light weight PLA I have used, but becuase I had no problems and had good prints I have no reason to change to another make. I will buy more of this when I need it, but after printing an entire model with this spool I still have over half left for other projects. So yes it is more expensive than normal PLA but it is half the weight and goes twice as far. It's ideal for model aircraft and other projects requiring a light weight.

Great product for RC aircraft. I find this product stronger and has a better finish than most of the alternatives. Withstands the heat of the sun well as long as you don't paint it black! Highly recommended. Best settings 0.25mm layer height, 0.4mm width, 55% flow, 238 Degrees C, 60C Bed.

great filament for building model aircraft

I admit I was a bit biased. Well, it's half cheaper than colorFabb and you have 1000 g on the spool, not 750 g. I tried first by printing a pair of cubes to set the magic fraction, i.e. temperature / flow. This is necessary if you are starting out with Low Weight filament. The cube should have 1 wall and a thickness of 0.5-0.55 mm. I use Kossel Delta printer, speed 55 mm/s, cooling max 20% and table 50 C. I also use 3DLAC spray on the glass table and it's better than enough. With these parameters, I print perfect models. Well, but I have a heavily modified printer, with a Dual Drive extruder (bowden). However, after two weeks of printing, I can say that I am satisfied. I don't see a significant difference to colorFabb apart from the creamy white color which forces me to paint some "white" parts. In the last photo you have a comparison of my fresh "Eagle" model. The body of the model has a few parts made of white PLA+. But I took one star because I have to paint. Apparently, the manufacturer is pushing the price down so much that he doesn't have to add any dyes. Something for something. The other properties are OK. And don't complain until you do the temperature / velocity / flow tests first. And finally, one note - you will not avoid flossing. This material swells and expands, so retraction is ineffective. But this can be easily removed later.

Much lighter than regular PLa. Easy to setup on printer

referez vous bien aux debits T° conseilles par esun ou deboires assures... j'ai du mettre un peu plus de debit que conseille (5%) pour avoir un resultat impeccable.

Hızlı ve başarılı

Tutto perfetto, ottimo prodotto che uso da tempo per i miei aereomodelli

Todo perfecto fácil impresión en paredes delgadas bien unidas

Easy to print and works as intended.