outemu Pack 32 Red Switches,3 Pin Key Switch - Cherry MX Equivalent DIY Replaceable Switches for Mechanical Keyboard 45gf Linear/RGB/Dustproof

Durable and great quality. Perfect loud clicking sound and works great for 3d print fidgets

Got these to swap out the noisy Blue switches on an affordable Redragon K552P RGB mechanical gaming keyboard with quieter and stiffer Black linear switches. While the "hot-swap" sockets on the Redragon keyboard are crap, these switches worked great for me, and completely changed the sound and feel of the keyboard from the stock, loud clickity-clackity scratchy Blue switches to much nicer, quieter and smoother linear Black switches. Had I known how bad the Redragon sockets are, I'm not sure I would have gone through the trouble, but I'm happy with the results and enjoy using the keyboard now. So if you aren't one of those crazy people who like loud, clickity-clackity keyboards, and want a quieter, smoother experience, these switches will give you that, along with a stiffer actuating force (which I prefer). Just be aware that if you're modding a Redragon K552P, it's going to be difficult to pull the old switches out of those grippy sockets, and only slightly easier to muscle these switches in. After that, it's all good. The stock Redragon K552P keycaps fit these switches and the RGB looks really good shining through them. If you don't want the heavier actuation force, get Red linear switches, and if you like that tactile bump but not the noise, get Brown switches.

Works great on my redragon K671. Ordered a bunch because I have a feeling more of the stock keys will fail

Pretty good for me, but pick the feel that you like. Be careful when installing, about 1/5 of the switches bent the pins during install.

It was a little hard getting the original switches out of my Redragon keyboard, but putting the new switches in was easy, I recommend being very careful and taking your time to make sure none of the pins are bent when installing. The switches are very responsive and have a satisfying amount of clickiness.

I use them on my red dragon keyboard. I've set up the keyboard so not all of the keys are "clicky" swapping out the switches is straightforward, I recommend getting the standalon removal tool. the one they provide with the switches will work but it is difficult

Perfect clicky sound. Just what i needed it for.

Switches fixed my sticky keys problem and were easy to install

These do NOT make the click noise I was looking for. I believe that's my fault though. Other than that they a great for replacement keys or to use inside 3D printer fidget toys.

I ordered 100 switches total. All of them worked fine. The only ones that didn't were ones I installed incorrectly (bent the wire installing, whoops! lol). Overall would definitely recommend. Edit: Originally I gave these a 5/5 but I have updated it to 2/5 (almost should be a 1, but they did work). These were the first switches I bought so I didn't have much experience. I now need to say (in regard to the bent metal contacts) that I do think the poor design of this switch is at least partly to blame. The switches are build slightly too large. I only noticed this when I switched out these switches with the Outemu Lemon v3 ones. Those go in so perfectly and it feels like for these brown ones, you were having to apply a little extra force. On to the main issue: these switches are a disaster when trying to be removed. The top part of the switch is flimsy to the point that you will break multiple of the switches while trying your best to be delicate (and good luck to you then because your best bet at that point is to break the tab off in the middle so the switch can come out). I don't think outemu as a whole makes poor switches. In contrast, the lemon v3's I now have are so amazing that I don't even feel a need to get any other switch. Which makes these brown ones and their poor quality quite a huge disappointment. I almost feel like they shouldn't be sold any more. If this is your first time buying your own switches, there are other cheap outemu switches that would be much better.

Perfect for those 3D printer fidget clicked. Apparently, theses ones make the most satisfying sound 🤷🏼‍♀️

Worked perfectly for my 3d printed clicker toys! Very satisfying click.