Sealegend 2 Pieces Dryer Vent Cleaner Kit, Dryer Lint Vacuum Attachment and Dryer Lint Screens Cleaner Brush,Flexible Lint Remover Hose Black

This gadget is amazing. Stumbled upon it by accident. This is the upgraded newer version it says. So simple and underrated but it works like a charm. Just goes to show you that if something is actually made for it’s intended use it does not have to cost a lot of money. Personally I found it very easy to use. All vacuums are slightly different but if you can find a way to attach the piece to get suction, it will work. Hose easily bends and plastic seams thick enough to last awhile. It also come with the brush which I use right after the hose to get whatever was left behind. The cleaning power will obviously depend on your own vacuums suction. I love that lint that would otherwise get jammed is now easily removable. I say try it for yourself at such a low price. Don’t give up if can’t figure out attachments immediately, keep trying.

The Sealegend 2 Pieces Dryer Vent Cleaner Kit has proven to be a lifesaver for my laundry routine, addressing a persistent issue with my dryer efficiently. Initially, I was frustrated with my dryer taking multiple cycles to fully dry clothes, which not only wasted time but also energy. After using the Sealegend kit, I noticed an immediate improvement. The flexible rods and brush effectively removed built-up lint and debris from the dryer vent duct, allowing for improved airflow. The kit is straightforward to use, even for someone with minimal DIY experience like myself. The rods connect easily, and the brush reaches deep into the vent, dislodging lint that had accumulated over time. It's a simple yet effective solution to enhance dryer performance and prevent potential fire hazards associated with clogged vents. I appreciate the durability of the materials used in the kit. The rods are sturdy enough to navigate bends in the vent duct without bending or breaking, ensuring a thorough cleaning process. Moreover, the affordability of the Sealegend kit is another plus. For a reasonable price, I was able to solve a frustrating problem and improve the efficiency of my dryer significantly. Overall, the Sealegend 2 Pieces Dryer Vent Cleaner Kit exceeded my expectations. It saved me time and energy by resolving the issue of prolonged drying times, making it a worthwhile investment for anyone experiencing similar dryer performance issues. I highly recommend this product for its effectiveness, ease of use, and cost-effectiveness in maintaining a properly functioning dryer.

Works well in cleaning lint out of dryer that dryer filter missed.

So far it works with the vacuum cleaner. I have not used the hose as seen in the picture yet on the dryer. But i imagine it work on the dryer too if it works great under the refrigerator and the stove to get all of the debris.

The brush can be used for many purposes not just for the dryer. The hose is ok but other methods can be used to remove the dryer lint.

I have used it once and it works good. Since I can’t actually see down in the dryer vent I assume it got what was necessary. I also used the attachment for the vacuum cleaner to clean the baseboards on each side of the dryer because they are hard to reach.

This works really well to help get trapped lint out of the lint trap. Was able to get a lot of stuff out. Highly recommend!

I really got my money's worth for the price I paid for this kit. I have an adapter for my Ridgid shop vacuum for mini attachments (shown in picture) and it fits into the dryer vac attachment very well. It's a tight fit into my Fridgidaire dryer but it reaches down into the dryer as far as where the hose begins. The hose won't go down in there. But it picked up clumps of lint so big that it couldn't digest it and I brought it up to the top and pulled the lint off by hand. I use the flexible brush to loosen more lint and then vacuumed it out. I can only imagine what I'll find when I go into to back duct of the dryer. It's amazing the dryer was still drying clothes. The lint filter opening in my dryer is about 5/8" wide. I also vacuumed the outside of my Samsung refrigerator coils with this but I had to blow the inside coils clean as this will not go in between them.

I delayed getting this brush and dryer attachment for a long time due to price point. But once my fridge stopped cooling after a power outtage, I had to open the back panel only to see caked dust back there. I repaired the fridge with replacing the inverter. And cleaned everything afterwards. This brush makes it possible to get in the slots and scrape at this caked dusty mess. Then you vacuum it out with attachment. So once a year I will clean the back fridge now with this. You need to unplug fridge to do this. It’s not a good for the fridge to unplug it but for a few minutes a year can save the lifespan of it by preventing overheating. I did not use it on the dryer yet but I will today. The dryer hose has a silicone universal attachment. It fit my Dyson animal just right. It does suction well. It is a little stiff and does not have a flex tip like I thought but there must be a reason for durability for aperture perhaps so the nozzle does not collapse into itself during suction. There is a hardness that a vacuum piece must be not to do that to render it useless. Overall, wait for pricedrop to $20 or less and get this if you own a dryer, AC, some air vents, and fridge. It can prevent a fire, and overheating of units. And increase lifespan of them during these times ppl are bring frugal. Take care of what you already own. Don’t let your money go to waste over small things you can do to prevent a disaster.

The videos and product details suggest that both brush and hose extension are super flexible, go deep in your dryer lint trap etc. At least that is the impression I got. The hose extension is just that - an extension. The connection to the vacuum is snug and I believe it would fit almost any size vacuum hose end (ours is an old fashioned dyson ball upright). The side closeset to the vacuum is springy and flexible, but that's where the flexibility ends. The end that actually goes in the lint trap is around 8-9" long, flat/oval straight tube of hard and inflexible plastic, so in my front load LG dryer, it only goes straight down. It is only marginally longer than the flat wand attachment that came with the vacuum, which doesn't reach the bottom of the trap by about an inch or less. This extension also reduces suction capacity A LOT, so it is a choice between using the vacuum's own attachment with excellent suction, which goes almost all the way down the trap, or this one which goes all the way down, but results in mediocre suction. The brush came folded in half. If is made of heavy gauge stiff braided metal wire and I haven't been able to get the bend out of it. For the same reason, it is also very hard to flex. The nylon brushes are also of uneven density and mostly flattened to the wire braid, apparently from the way they are packaged by the manufacturer. It does a basic job of pulling lint out of the trap, as it won't really bend along the sides. I wouldn't recommend this product at all.

Works perfectly

Work very well cleaning out my vents in my gas dryer...so much lint and dirt came out.

It clean very well, the suction well done.