WTB Tubeless Bicycle Rim Tape (34mm x 11m) Easy Tubeless Setup & Airtight Seal, Compatible with All Tubeless Rims

Used these to replace the terribly applied rim tape that came with the Hunt 27.5 trailwide V2 with a 30mm internal. Holds air well so far and works as intended

I installed the 34mm tape to my DT Swiss FR 541 rims. Works great with my Continental tires, DT Swiss tubeless valves, and Orange Seal tubeless sealant.I also have the 45mm width tape installed on my other bike on WTB i40 KOM rims.

Works well, easy to use, his air consistently!

Strong tape. Good stick. Works as required.

Another great WTB product. Does the job very well.

First time doing this, had my son help. since it was cold I used a heat gun to gently warm the tape to make it more softer. Pressed it in to remove air bubbles but this was still difficult. In the end, the tire is full pressure and holding up nicely

I was using Gorilla tape to convert my mountain bikes to tubeless setup, but after using this tape, I'm not going back. This tape is easier to apply and leaves no fabric strings on the edges or ends. It seals perfectly the first time, and if you order the proper width for your rims, there is no trimming. I highly recommend.

See attached picture. I've ordered four rolls of this tape and they have all been defective. The first layer or 2 is fine but after that it is as if the role was cut incorrectly and the tape is split and is not wide enough for the rim. It is not usable.

I've put it on the rim a few weeks ago, it works. It doesn't stick particularly well, that might be ok for when I need to remove it - but I don't know how well it will stay. It's pretty rigid so it's a bit awkward to make it fit the rim tightly.