Pool Water Test Kit, Complete Swimming Pool Water Test Kit, for Chlorine, pH, and Alkaline Levels, Ideal for Pools, Hot Tubs, and Spas, 1-Pack

Want a flawless pool? Get a Taylor Test Kit and follow the Trouble Free Pool system for maintaining your own pool. Look up Trouble Free Pool on the internet. Learn about your pool's water chemistry. It's not as difficult as people think. The people there are super nice. There is also an article about which test kit would best fit your needs. Have any questions, just ask them! Testing Kits are NOT the item you want to skimp on. These tests tell you the health of your pool.

There are similar test kits out there, I cannot speak for those. I got a 7500 gallon above ground pool hearing my whole life how much of a nightmare they are and how expensive the chemicals are. I didn't care, I wanted a pool. I also got test strips, they were not nearly good enough. This pool is round, 18ft diameter and 52" deep. The volume of your pool directly reflects how much your chemicals will cost. I'll kind of break that down as well in this review. Keep in mind, my pool is only 7500 gallons. I ordered this. It allows you to do a bunch of tests and comes with a nice guidebook on what it all means. It's a lot but if you read the little book it's very interesting and gives you an actual understanding of some of the many things happening in your water. The bottle sizes are small and you can only test for CYA a handful of times (you shouldn't need more than this kit for a solid summer of learning) and some of the tests you only need to do once or twice a season, so those bottles will last a long time. For the tests that require frequent testing, which changes depending on your water source, there is quite a bit here. I have very high alkalinity in my water, so there was a lot of alkaline and PH tests I had to do before I got that in check. My hardness was alright, and PH will move around a bit since chemicals aren't neutral, but for me my PH tends to go up, so a couple bottles of muriatic acid lasts the entire year, easily. I'll review the product first. I love this thing. There's 2 sizes so it's recommended to get the one with the larger size bottles. I got the smaller one and honestly it's enough. As I said, most of the tests aren't even monthly tests, and even the larger size bottles are still pretty small for the regular tests. You can purchase a 16oz bottle of R-0871 and a half pound of R-0870 powder for less than the cost of this entire kit, and you'll be able to test chlorine every day of the year 20 times if you want. So i recommend getting this kit, learning the chemistry, then just buying large bottles from Taylor of the refills you use often. This is a perfect starting point though and it will save you money. Most of the tests are very simple once you get the hang of it. Get a water sample, put in a few drops of a certain bottle, put in drops from another bottle, reference a sheet, add what it says. A few have an extra step and a few have even less steps. Once you learn it, you can pop out a chlorine test in a minute. I pretty much end up putting a red solo cup (2 cups) of 10% liquid chlorine in the pool a day now that the pool is balanced, and every 2 weeks I need to add a cup of muriatic acid. Of course you need to balance everything first and get your CYA levels right, but if you read the booklet you'll understand all that in no time. Cost: So I spent the summer learning and trying to figure out the ins and outs so I did a few experiments so I probably used more chemicals than I had to overall just to get the hang of it, but here's what I spent. I spent about 20 dollars in muriatic acid, bought a massive bottle of pool conditioner(cya) for like 30 bucks that should last years, a box of shock powder packets for 30 bucks, and about a gallon of 10% liquid chlorine a week. sometimes more, sometimes less. Those gallon jugs are 6 bucks each approx. Overall, now that it's balanced, on average for a 7500 gallon pool, I don't spend more than 10 bucks a week. The odd time I go on vacation and the water gets a little out of control, I just shut off the pump, let it settle, and vacuum it out to waste a few times then dump in a packet of shock powder and turn the pump back on and clean everything a couple more times and it's crystal clear again. I'm about to now purchase larger sizes of the chemicals to check chlorine levels and I should be good to go for years.

QUICK SUMMARY: This is the exact and perfect kit to test your pool or spa water. It is accurate, easy to use, and will save you a TON of money because you won't have to blindly follow the advice of your neighborhood pool store. Highly recommended!! Background: We just had built a new backyard pool this summer. Initially, I took water samples every week to two (sometimes three) different pool stores that sell chemicals and equipment to pool owners. I quickly learned that water testing is half-art and half-science. I also learned that NOBODY will be as careful to perform water tests on your pool water than YOU. Finally, I learned that there is so much variation in testing methods -- leading to differing, often conflicting advice from the pool pro at the pool store -- that the best course of action is to just do everything yourself. It's easy to do, and it'll save you money, too. More background info: I mentioned above that I had my water tested by two (or three) pool companies. Using water samples taken at the same time and place in my pool, and having the water tested within the hour, these pool companies would give sometimes widely varying test results -- leading to sometimes conflicting advice. Example: Pool Co #1 said my free chlorine was 4 ppm, while Pool Co. #2 said my free chlorine was either near zero or super high, like around 10 ppm. Example #2: Pool Co. #1 said my Total Alkalinity was way too high; add acid! Pool Co. #2 said my alkalinity was a little low; add baking soda! Whom do I believe? This is why I test my own water now -- I *very carefully* measure everything, including the amount of water being tested, and the drops of the chemicals I add to the water. I'm not in a rush; I want accurate test results. What I LIKE: - It's easy to learn how to test your pool water for all the essential things: Free Chlorine, Combined Chlorine, pH, Total Alkalinity, Calcium Hardness and Cyanuric Acid (stablizer). Only the cyanuric acid test is a little tricky, but you can easily repeat that test over and over without using more test chemicals (more on that later). - There is a very helpful pamphlet included in this kit that explains a lot about water testing and sanitizing. It's pretty easy to read, too. - Using this kit lets you very precisely determine chlorine levels, including both free and combined chlorine, without having to do any color matching. In fact, there is no color matching for any of the tests except the pH test. What Could Be BETTER: - I wish the kit came with a larger supply of the chemicals you use the most: the powder and drops used with the chlorine test, and the red drops used for the pH test. These are the tests you'll want to perform daily. The other tests can be done between once a week and once a month. - The kit should point users to the Taylor website's videos which show how to perform the tests. Additional Advice: Using this kit, I'm taking a minimalist attitude towards pool chemicals. I don't shock the pool -- EVER -- unless combined chlorine is 1.0. That saves money on chlorine. I don't add clarifiers, phosphate removers, shocks, superchlorinators. I keep my pool water around 3-4ppm with high levels of stablizer so the chlorine doesn't get burned up in the sun. I do add algicide once a week as a precaution against algae. And I only add acid when pH rises to 7.8 or higher. Advice on Testing Procedure: Taylor (the manufacturer) says that to measure the liquid drops correctly, you must invert the bottle 180 degrees -- not 90, 120 or 150 degrees. Turn the bottle completely upside down and SLOWLY squeeze the bottle to form full drops that fall into your test water. If you turn the bottle horizontally (90 degree rotation), then squeeze, the drops you create are undersized and you don't get accurate results because you added too little test chemical into your water. I am shocked at how pool pros at pool stores and others who maintain public swimming pools use Taylor chemicals but don't follow Taylor's instruction on performing the test procedure! I've already disregarded the advice of the "pros" who have suggested that I add this chemical or that chemical to my pool. Using this Taylor kit, I am confident that I can continue keeping my pool water crystal clear and sparkling by spending 5 minutes a day doing chlorine and pH tests, and a few more minutes doing the other tests on Saturday morning. If I followed the advice of the "pros", I would've dumped acid into my pool when I didn't need to, or I would have shocked my pool even though there was no reason to do so. With knowledge comes power, and this Taylor kit gives me the knowledge I need to maintain my own pool water quality. Highly recommended!!! 9/6/2012 UPDATE: It's been a year now since I wrote the above review. I re-affirm everything I wrote. My water has been sparkly clear every day of the year, and I've only shocked the pool once, just before a big pool party with lots of kids. I only use algicide after a big rain, not once a week. I test my water every 2-3 days now. I still take water samples to the area pool stores every couple of months, but I trust my results before I trust theirs. One tip I didn't mention in my review: use only one scoop of the FAS-DPD powder, not two, if the water turns pink after adding just one scoop (it always turns pink for me after one scoop). Adding the extra scoop when the water is already pink doesn't improve or detract from the test you're performing, but it does waste the expensive powder unnecessarily. 12/20/2013 UPDATE: Wow! Thanks, Amazon-ers, for all the Helpful votes! :-) This summer, we dropped using algicide altogether, even after big rains. We keep our pool in the 3.0 to 4.0 free chlorine range, and that apparently has kept algae and pink slime away without adding any other chemicals to our pool. I probably saved $50-$100 this year not using algicide. If I am worried about water clarity after a party or big rain, I add 1.5 gallons of unscented, plain Clorox (which is just diluted form of pool store liquid chlorine). The pool was spotless, crystal clear and enjoyable all year long. I also don't test the water every day, either; instead, I test the water 2-3 times a week. Because the water condition is held constant for so long, and because I know my pool and pool water so well, testing more frequently than this is unnecessary. If you're just starting out, test every day until you really understand your pool and how to balance your water. Then, back-off testing it daily but not less than 2-3x per week. I can't believe how easy it is to maintain crystal clear water. Note that I added the extra advice, above, on the test procedure to use, since it's important to not only use good quality test chemicals, but also to follow a correct test procedure, too. 01/22/2017 UPDATE: I don't have a salt test kit, and my salt water chlorine generator's salt reading was reading high (it does that when the water temp drops). So, I went to three pool stores to have my pool water tested (two of them Pinch-a-Penny stores, one a local pool store). Below are the results from the three stores. Salt reading? 3000 or 3300 or 3750 Chlorine level? 1.5 or 4.0 or 4.0 (I got 5.5 from my own testing) pH? 7.3, 7.6, 7.4 (I got 7.2; I added acid an hour earlier) Alkalinity? 80 or 85 or 120 (I tested 85 after adding a little baking soda when it was 80) Calcium hardness? 270 or 330 or 290 (I got 380) Stabilizer? 25 or 80 or 60 (it's 60, and has been for months) I watched one guy (who didn't test my water) shake drops out (NO! gently squeeze them out). Another squeezed drops holding the bottle horizontally (NO! hold the bottle completely upside down). The imprecision of these pool stores in their testing process is observable if you know what to look for. The kicker? My chlorine has been high because the water cooled. The Pinch-a-Penny that told me my chlorine was only 1.5 said I should I use the Boost button to increase my chlorine. NO!! Never, NEVER trust a pool store to test your pool water. (I'm going to buy my own Taylor salt test kit now....)

I gave up using a weekly pool service after hiring and firing three companies over the last 18 months. Your experience may be different but everyone I hired send a tech over who brushed the sides of the pool, dumped in a lot of chlorine and left. Whenever I became suspicious of the water I'd take a sample to a local pool store to find that I really shouldn't be swimming in that water. I used to do my own pool maintenance for a number of years - I didn't really want to take the task on again but I think I'm the only person I can trust. Any pool owner will tell you that brushing the sides and the steps plus cleaning the various filters is the easy part. Keeping the chemicals in balance is the more difficult task. You'll also learn that you can't always trust the pool store analysis. The cynic in me thinks they're just trying to sell me chemicals but it's possible that the tech in the store simply doesn't know much more than I do. I had an old test kit that only tested for pH and chlorine. That's usually enough but I also wanted to check other readings that mattered or at least have a way to confirm what the pool store was telling me. I have to admit that I was a bit intimidated at first with all the tests I can do with this kit. But, with a bit of research and paying attention to the included user manual and just some good old common sense I found it very easy. It's currently winter here in the Phoenix area and while the pool is open no one in their right mind would step foot in it - the water is cold and I'm not going to heat it. Because of the water temperature and the fact that the fired tech had my chlorine level jacked up to over 8.0 I haven't had to do much with the chemicals. But, I did learn that my CYA level is very high so I'll be replacing the water in the next month. So far my routine has been to check pH and chlorine levels weekly and performing additional tests once a month. This is a schedule that will probably continue throughout the year unless I notice anything out of the ordinary. It's nice to have a good kit that gives accurate readings at my side.

The test kit is great and easy to use. First: The kit is well organized and color coded. The directions for each test are included on the sample case and color coded to match the appropriate reagent bottle cap. For example, chlorine test is yellow. All the test directions are highlighted in yellow and the corresponding sample reagents have yellow caps. Makes it very nice. Alkalinity is green, pH red, etc. Second: The guide that comes with the kit is great. It does a very good job of explaining the various test parameters without getting too in depth. It includes all the chemical addition tables that correspond to the appropriate test. It even has a few test like "pool owner scenarios" where it gives you the theoretical measured parameters, pool size, etc., and you have to refer to the tables to see how much of the appropriate chemical must be added. Very nice in that it teaches you how to relate what you measured to the chemicals you may or may not need to add. Third: This goes along with the second point, but the chemical addition tables in the booklet provide the necessary information for you to make your own adjustments. Simply follow the test directions and if a parameter is out of range, refer to the corresponding table in the booklet and it will tell you how much chemical you need to add to your pool to achieve the appropriate concentration. Overall I couldn't be happier. I feel like the guess work is finally gone. For the first time in 3 seasons, I actually went to the pool store and instead of them telling me what I needed, I was able to tell them. I bought the appropriate chemical, went home, added the calculated amount based on the test results and corresponding booklet tables, and it worked!!!! Overall this seems like a great product.

Purchased the Taylor K-2006 Test Kit for a saltwater spa with chlorine sanitizer electrode. This review is relevant for Spa water but not pool water. I gave the Taylor K-2006 Test Kit a 1-star review because the test results were not accurate for pH or free chlorine. Freshly balanced water (additions included alkalinity increaser, pH decreaser, Spa salt, Silk Balance; chlorine electrode off) was tested using the Taylor K-2006 Test Kit and compared to test dip-strips and a Spa Dealership test instrument. Results were: * K-2006 Kit: free chlorine =33, alkalinity =125, pH >8.0, hardness =20 * Spa Dealership: free chlorine =0, alkalinity =120, pH =7.2, hardness =25 * Dip-strips: free chlorine =0, alkalinity =130, pH =7.2, hardness =25 It appears that one or more of the additions used to balance the water causes and interference with the Taylor K-2006 Test Kit. Test results for the source water before any additions were: * K-2006 Kit: free chlorine =0.1, alkalinity =80, pH >8.0, hardness =90 * Spa Dealership: free chlorine =0.2, alkalinity =80, pH =8.2, hardness =93 * Dip-strips: free chlorine =0.5, alkalinity =85, pH =7.8, hardness =80 I contacted Taylor with my concerns that there may be an interference with their test kit. Initially Taylor indicated that they were not aware of any chemical interferences and were very helpful in helping me try to identify the problem. However, Taylor became uncooperative indicating that they stood 100% behind their test kits and that 1) I was probably doing the tests incorrectly, 2) that test strips are highly inaccurate, and 3) that the Spa Dealership instrument was probably not calibrated. For the record I was a trained and certified water chemist that conducted these tests in the laboratory for years. While Taylor is correct that test strips may be inaccurate it is unlikely that a Spa Dealership would jeopardize their business by not properly calibrating their test instrument.

I’ll be the first to admit it – I’ve been using dip sticks for far too long, and it’s been a frustrating experience. But the TAYLOR TECHNOLOGIES INC K-2006 TEST KIT has completely transformed my approach to pool maintenance, and I’m kicking myself for not making the switch sooner. This kit is an absolute game changer. It provides accurate and reliable results, which is crucial for maintaining a safe and sparkling clean swimming pool. The FAS-DPD method for measuring chlorine levels is a revelation compared to those finicky dip sticks. What I love most about this kit is its precision and ease of use. It’s straightforward to follow the instructions, and the color-matching system is simple and foolproof. No more guesswork, no more frustration. I can confidently say that this kit has improved the quality of my pool water, and it gives me peace of mind knowing that I’m using a professional-grade tool. It’s an investment that pays off in the long run, both in terms of time saved and the health of your pool. In conclusion, if you’re still using dip sticks like I was, it’s time to upgrade to the TAYLOR TECHNOLOGIES INC K-2006 TEST KIT. Don’t be like me and wait too long to make the switch. This kit changes everything and makes pool maintenance a breeze. Highly recommended! ⭐⭐⭐⭐⭐🏊‍♂️🔬

Checked against the pool store sample and its close enough. The cool part with this kit is the acid/alkalinity demand option. If either are high/low, you add drops of the demand reagent until the color matches where you want your reading to be. Then you look the drops up on the chart in the back of the book and it tells you how much acid/soda to add based on gallons. It works great. My pool is 26,000 gal so you have to add up the 20, 5 and 1,000 gal amts to get the correct dosage. Or just take the half the 50,000 gal amount. Don't be a slave to the pool store. You can do it yourself.

Très bon produit

Had water quality issues for a while off the cheaper kits, then came this. Extremely easy to use and very accurate results, my pool was crystal clear within days of using this. Don’t let the price deter you as you are paying for what you get. I’ll never use another brand again!

This was shipped quickly to Ontario, Canada in under 1 week from ordering. The kit is of good quality and the case it comes with is very durable. The testing kit is good and has produced good result for me. I have not yet tested against a pool store but the kit gets you detailed readings of your chemicals. This kit tests Total + Free Chorine, Alkalinity, PH, CYA, and Hardness. It easy to use and the instructions are clear. My chlorine testing bottles expire 09/21 and the rest of my kits drops expire 6/22. Some tests do use quite a bit of the solutions and I am preparing to have to buy more near the end of the season.

Product came as described and was a great value !!!!

Achetez-le. Arrêtez les bandelettes. Pendant 2 ans mes bandelettes disaient CYA à 30-50 ppm. Premier test Taylor : plus de 100 ppm. 8 ans de galets stabilisés par les anciens proprios, jamais vidangé. Le chlore ne servait à rien. Ce kit à 50€ m'a appris plus en 10 minutes que 2 ans de bandelettes. Précis, fiable, indispensable. Chaque euro est mérité.