Motorcycle Slip On Muffler,1.5-2" Carbon Fiber Unversal Slip on Silencers

Looks great, sounds amazing. Very well packaged. Of course, longevity is probably not there but it’s only $35.

Nice for the price 👍 not to expensive like other mufflers .looks good not perfect but looks better than the stock gy6 muffler . I haven't installed it yet but will ASAP. I already like it even though it hasn't been installed. I hope it goes smoothly while installing. Moped should sound better with this muffler than stock muffler.

pretty good for the price sounds good it dose fit the ninja 500 but you have to take out the adapter its stuck in there real good have to take out the baffle and use a piece of metal rod long enough to reach the edge of the adapter and tap it out with a hammer then it will fit so if you have a 51mm mid pipe it will work don't need the 51mm to 38mm adapter it's a weld on part it doesn't have the offset bracket with it and the springs are a little short but with some effort they will go on so if you looking for a muffler that won't break the bank it will work just fine.

I was a little skeptical at first getting it because it was sooo inexpensive. But I gave it a shot like I don’t really lose much if I don’t like it. But honestly I installed it and love it better than the muffler I had on it. Sounds better when riding. The carbon fiber finish is great quality as well. Highly recommend if you trying to get a great product for an amazing price. (FYI - the pipe is my old pipe and didn’t come with the muffler.

The sound is incredible on my modified gy6 scooter, it sounds very bassy and low "thumm,thumb, thumm" at about 2k rpm. It surprised me how good it sounded. This is without the db killer insert. So with the db killer, the sound is very improved and very tame and silenced well enough to be not obnoxious. Still sounds great just in a very muffled way, the bass is cut down like 90%. With the cap piece taken out you get a lot more volume focused on the mid to high tones. And with the tube out you get full bass Great price for this and the included hardware. The fit, and quality of the used materials was good but I had exaust leaks around the seam joints. The steel used was of great quality, but seemed like it needed to be pressed against the joints better. The carbon fiber matirial is just paint over steel.

Muffler looks great and appears well made, but leaked badly from both ends and the slip joint within 10 seconds of startup. I installed this on a 12HP Honda GX390 single cylinder and it also started smoking/melting after about 1 minute of running. I didn't use any exhaust sealant on the slip joint as this was a test, so I don't fault that leakage, but this also leaked from both end caps. The silver liquid on the fitting is nickel-based anti-sieze since this was a a fit/function test before final install. With a perforated pipe dB killer installed in the inlet, the engine was much quieter than the factory muffler. So that's nice. If this had a steel case and was actually sealed, I'd happily pay double.

Got it for my mini gp but ended up putting it on my dirtbike 🔥 videos below showing what you want to see and hear

Sounds good and its cheap, but you get what you pay for. After a month, like other reviews have said, the tip started switching colors, i noticed the area where it was changing was leaking air, hence the discoloration. On the second month after a light rain on which my bike had a cover. The tip started corroding. I should have bought a higher quality pipe, the midpipe was like 90 on ebay, now i dont know if I'm going to be able to remove the pipe without hurting the midpipe.

It seems pretty legit for the price. I put it on a 2025 tenere 700 and pulled out the baffle for some better sound. For the price, if this falls apart in a year or two I’ll just buy another.

It is perfect. I ordered another one so a can make my bike a dual pipe

Trash, don't buy it, it won't fit your motorcycle, it is not reaching/attaching to the bike when you put the holder on, see pic attached. This is to let everyone knows that it will probably not fit your motorcycle. You will have to buy a middle pipe which will cost you another $40. I will give 1 star because it doesn't fit my bike and the seller do not mention that it needs a mid pipe. Also, the quality doesn't feel very reliable.

Great sound but sadly started melting and rusting hard on the inner side of the muffler. I just can't recommend for longevity as it lasted less then 1 full riding season :'(

Delivery was delayed and it came it was just a box with 2 random pieces of metal in it. Nothing else. Don’t order this