RE330 AC1200 WiFi Extender Booster WiFi Booster

Great Speeds, Easy Setup, Fantastic Price - Setup: 5/5 – Download the Tether app, follow the simple steps, and you’re good to go. - Performance: Strong, reliable coverage that wipes out dead zones and maintains fast speeds for daily streaming and browsing. - Features: Surprisingly versatile—the app gives you full control over connected devices and custom schedules. The Bottom Line: You don’t need to be an IT expert to get great Wi-Fi coverage. The TP-Link RE330 delivers fast speeds, great app control, and hassle-free performance at a budget-friendly price.

I purchased this item during the prime day sale. The smart light in my 2nd bedroom had issues trying to connect to my router, which is in my dining room. The app kept showing it was disconnected due to a poor Wi-Fi signal. This extender literally took 5 minutes to unbox and connect to my router using the WPS buttons. I then connected my light to the Wi-Fi Ext, and voila, my bedroom light now responds perfectly with a strong signal showing in the app. Easy to set up (I am in my mid 70's) and recommended.

This is now working very well. There are numerous reports of dropped connections, and as this is only day 2, I'm hoping that does not happen, as I'm very happy with it. However, it was not particularly straightforward to set up. I work in IT, and have good experience in Networking, so hopefully can write this from a position of some knowledge.I do feel that this is mostly a very good product, but where is the bug testing, and quality control? This is how it was for me, yesterday: Firstly, even though I have the DGND4000 Netgear Premium Router (a current model at the time of writing), the TP-Link Extender did not want to co-operate with the WPS syncing procedure. After several goes of a complete failure to pair the two devices, I gave up and tried the Ethernet option, with cable and web browser. This looked like it was too, heading for failure, and I started to think of product returns, and my disappointment started to climb! The reason? : The server address for the unit, instead of giving me the setup password login page, gave me what appeared to be a series of "extra" links to what were essentially adverts. There were even links to other items available on Amazon, and one of the links prompted WOT (Web Of Trust) to flag up the clicked item as of dubious nature! But where was the green and white setup screens I had seen in the instructions? Where was the user login? None of that came up in Firefox, so I tried Opera and Internet Explorer. Exactly the same. A complete inability to get to the setup screen. I went to a completely different PC, and at last, managed to get to the Login to set the thing up. I've no idea why the units setup page didn't want to know on the other PC, which is very well set up and maintained. Setup was then straighforward, and soon the unit was ready to plug into a wall somewhere, to try and test its' signal. Good extension of signal was seen, with at least 4 lights lit up, and in a rather dead spot area of only about 78 to 82 dBm, this has climbed rather nicely to the low fifties, around 52dBm I would say. Generally, the signal was improved everywhere, and even outside on the patio, a signal could be seen that was usable, though pretty thick UV screen double glazing. I wanted to get back to the setup screen, mainly to familiarise myself with what it offered, and see if anything might need a tweak. Basically to see what was there. But none of the PCs I tried (4 PCs, wireless and wired) would let me back into the setup screen. Unlike before, where I got these strange advert links (with TP logo at the top by the way), well....this time, I got even less. An almost unclickable screen that looked nothing like the setup pages. So I tried my Kindle Fire HD. Amazingly, this gave me the setup screen through the Dolphin browser, and I was able to see what the various settings and options were. I thought "at least if I need to change anything, I'll use the tiny screen of the Kindle" Next, I noticed that all "wired" connected PCs had lost their connections to the Net. Meanwhile, Windows got a bit busy trying to determine new networks, and changed names (inappropriately) and even the Icon of the Network, as seen on the Windows Network and Sharing Centre. After a re-boot of those wired PCs that didn't want to know, to my horror, they re-booted with STILL no connection. Then I began to worry a bit, and started to think of taking the TP extender out altogether and being done with it all. So then I reset the router too, and at last, the wired and wireless PCs were now seeing a connection, and the wireless PCs were getting good signals. Walking around with a wifi analyser on the Kindle, I was able to see just what I was getting all around the house, and quite a few speed tests revealed at least what I was getting before, so no great loss there, even though these units can halve your bandwidth in the process of extending it. For some odd reason, on one PC, I can now use Opera to see the setup pages, where before I got the odd screen that would not let me set anything up. Yet Firefox and IE still don't let me see that page. So at least if I want to change anything, I no longer have to use the tiny screen of the Kindle to do it, and I need to remember that Opera will now let me. So while it now appears to be working very well, and settled in, it was by no means straightforward. Flaky things happened, which suggest to me a product that just has not been tested enough. I appreciate that some people are up and running in just a few minutes. That's networking for you! Odd things can happen, and there are a lot of variables that can come and bite you on the backside. But when you have a very well set up network like mine, with all recent gear, things like this should not really occur to this extent, and WPS should just work, shouldn't it? Modern router, press....done? All the resetting, failed wired connections? All that suggests to me that some serious "real world" testing needs to take place on the part of TP Link. Also, one other slightly strange thing. On wireless PCs, if I go to the "Currently connected to" networks using the system tray icon (the one that shows how many bars signal strength you are getting" and click on there to disconnect and then reconnect, it fails to! You just get the yellow triangle with an exclamation mark inside it. This never used to happen....you could connect to one network or another at will, wait a few seconds, and then you're up. Since the TP Extender went in, this seems no longer possible : a disconnect followed by a reconnect will always then result in failure to see the network, and the only thing you can do then is to re-boot the entire PC. This is a pain, and effectively makes this feature in Windows useless. So now, it's great. Very happy with it. I just hope it stays that way and does not drop connections like many have suggested. I'll soon forget all this tedium, and if it keeps working, then that's all I want. I should really give this two or even three stars, for all the hassle, but it's now working well enough that four stars seems just about right. I hope this helps anyone. Buy it, yes - but keep your fingers crossed for an easy ride! ** UPDATE ** - 21st February 2014 --------------------------------- Firmware update: so normally, I tend to like to leave a firmware at its initial factory setting, for at least a day or so, to see how it goes. That way, you've sort of got an idea of how it was out of the box, before you update anything. After all, Firmware updates can be a mixed blessing, and sometimes make things worse. Before the Firmware update, I had no problems with establishing a wifi connection after a re-boot of Windows 7, but AFTER the update, I seemed to have inherited some strange effects, which I can only put down to the update, since they didn't happen before. Upon rebooting, although I got full bars for signal on wifi, no browser pages would load. It was as though the TP Extender gave Windows 7 to understand it had a connection, but there wasn't one. I noticed when I went into the Network and Sharing Centre, that the "establishing connection" icon was going off and on and off. Something I've never seen before. At this same time, the Kindle Fire had NO problems seeing wifi, so it was as though just Windows had been affected by the Firmware update. Very odd! I decided to roll back the Firmware, and went to the TP Link site from a wired connection (which was fine) and downloaded the version I already had noted was the original the unit had shipped with. This easily rolled back, though I have to say that when the browser finished transferring the data to the Extender, it seemed to get stuck, and never actually gave the finishing "Success!" message that it had done on the time before. This left an uncertainty as to whether the Extender was "incomplete" or not, but no problems, it had rolled back fine. Then a wifi reboot, and now the Firmware was the older one, the "lost connection" on reboot problem seemed to immediately go away again. I really haven't yet bothered to "upgrade" again, to see if that behaviour creeps back in. Just these things can take so much time! Interestingly, there is even a note on the TP Firmware upgrade page, that they knew of this issue, and they refer to it, AND they suggest they've fixed it in later releases. AMAZINGLY, at least in my case, quite the opposite is true. Where is the testing? I never leave long reviews, but just trying here to give as much information as I can about my experiences with this, in the hope it either warns or helps other people. And having rolled back, all is now fine, and to be honest, I'm just going to leave it and hope it stays put and gives no other issues. At least be sure that you can successfully roll back a Firmware revision, if you have a problem. Good luck! ** UPDATE ** - 22nd February 2014 Sadly, this has now had to be returned. It remained flaky, at best, and also (as is common of Extenders of this type) it truly slowed throughput to a crawl. In my case, as I live in an area far from the exchange, and at best, get a very lowly 1.6Megs, I was finding that a typical 5 meg download started to take as long as 5 to minutes. This was almost like going back to 1992, and 14.4 dial-up modems! I can't recommend this, and would avoid staying clear, or perhaps just about giving it a shot if you have a really good broadband speed to begin with. ---------------------------------

I would never consider myself to be an IT whizz by any stretch so was I was totally amazed at how easy this booster was to set up! Ok you do need to follow the instructions and download the tether app on your mobile but it really was easy. The little blue light came on exactly as the instructions suggested it would and all looked well. The proof of the pudding was obviously if it improved my signal in the back of the house which is quite far from my router at the front! Behold my surprise when it was FULL signal having been weak at best before and generally not working at all . It's a neat bit of kit too, doesn't have any trailing cables or stick out too far from the wall. In addition of course it is a very reasonable price, I think you could pay triple the price and not get as good a result.

I have had two deliveries of this particular item type, to two different addresses. One of these was a mistake, perhaps on my part. I already wrote a review of the item which I re-ordered, which was supplied to the address I wanted. I gave it one (1) star as it did not work, and was a pain to install, and I wasted a few hours trying. I sent it back for a refund, which is now in progress. I don't know if that unit was faulty or not, but it was certainly incompatible with the router used and the network. I thought I might also have to send the current unit under consideration back, mainly as it wasn't at the location I originally intended. However, there are some weak spots in the wireless network in that location, so I thought it might be worth trying it out, to see if it would work, and if so, would it cover the weak spots. At this location there is a BT router, and the WPS method which I was previously unable to use worked within a couple of minutes. I then moved the extender unit to another location and it appeared that the network performance was improved slightly. Then I moved it to a location closer to the weak spots and it did appear to improve the performance, though I noted a couple of walls and windows between the target weak area and the unit, and also between the unit and the router. Finally I moved the repeater closer to the router, but perhaps with an easier "line of sight" to the weak area through a couple of windows. The signal lights on the repeater show full strength, which I never achieved with the previous unit in the other environment. The blue lights glow very strongly, which for some people may be an issue - depending on where the unit is. If it is placed in a bedroom that could be a real problem - I suppose it would be possible to put tape over the LEDs, or run the unit on a timer which would switch off at night. However, knowing that the device is reporting a good signal is a help. With this level of performance I might even be tempted to buy another one to extend the coverage area in another direction. It has been noted that the unit may operate in half duplex mode. Assuming this is the case, then technically that could reduce the data rate possible - but only compared with optimal operation over a good wireless link. The reduction in data rate for half duplex operation need not be much, if most traffic is one way. Data link protocols can reduce any slowing down of data transfers to a very low level. As the data rate on a wireless link tends to drop off with distance from the access point and indeed communications may become impossible, it is better to have a reasonable fraction of the maximum data rate over a link which works, rather than the full data rate over a non-functioning link - to put it in a somewhat convoluted way. As these plug straight into the mains, unless extension cables are used the repeaters may not always be sited in some of the best locations. They may be sited low down, which is probably not optimal.. Extension cables run up walls would be ugly, though better coverage might be obtained by siting these units higher up - particularly if extending coverage in upstairs rooms is a a requirement. I've not (yet) tested this to the maximum extent. For example, I don't know if I can stream HD video into areas where this would previously have been impossible. I may check that out in the future. For "regular" web browsing, sending email etc. this does appear to work quite well. Possibly I may end up combining my reviews for these units. If the units work with WPS, and with a router of your choice, then you may find that they are rather good and as such satisfactory. If the units don't work with WPS, and you can't get them to work with your router, then send them back for a refund as soon as possible, and don't waste much time on them. 2-3 hours is the maximum time to spend trying to get units to work if they steadfastly refuse to perform. I sent the other unit back, and the refund is on its way. Hence these are a bit like Marmite - like or dislike. There may be many factors which influence whether they work or not, and router compatibililty is one significant factor. The blue lights on the front are another objective factor. If the extenders are to be used where these lights might be a problem, such as a bedroom, these might be considered far too obtrusive. Of course the units could be turned off at night, and on again in the morning, but having to remember to do that each night might be an annoyance. On the other hand, if the units are placed in hallways or corridors, they could function usefully as night lights over night. I don't really mind blue lights, but nowadays we are being told that blue lights are bad for our sleep patterns. It's another factor which might sway some potential purchasers. If they work I'd rate them at 4 or 5 and possibly buy more than one to extend coverage. If they don't work after 2-3 hours trying, I'd rate them at 1, and send them back for a refund. That explains my latest evaluation of this product as 3 stars. If it works it's quite good - if it doesn't it's really not worth the money. At the current price (a tad under £15) if these work they could be considered a bargain.

This router is good so far I brought it hoping it helps my connection for Microsoft teams which I will find out in a couple of days. But I used apps that normally says slow connection but it hasn't since I set up the booster up. So easy to set up took not even 5 minutes. I brought a router the other week which couldn't set up at all so I'm really happy this one is easy and works.

The signal from my wireless router is fairly weak on my roof terrace and I wanted to increase its range, so thought, based on the specs and reviews here, that this would be the perfect solution. I chose this over the Huawei as the reviews were better and it was faster too, if a little more expensive. After finally getting it to work (the supplied instructions are VERY poor) I have noticed a lower signal on my terrace than before. The range extender is placed at the door to the terrace (and is physically visible from everywhere on it), but when out on the terrace the best signal I can get is only 1-2 bars on my tablet, or 2-3 bars on my laptop. The furthest I can go away from the range extender is about 20 feet, as any further will see me fall off the roof and hurtle downwards at rapid speed, but the signal falls off before this - it disappears around 14-15 feet away from the range extender - it's not being obstructed as I have clear line of sight of it, and moving it to different positions makes no difference. Before using the range extender I was able to reliably get a signal of 3 bars (occasionally 4-5) on the tablet and a consistent 3 (occasionally 4-5) on the laptop on most parts of the terrace. Even at only 3-4 feet from the range extender though, the signal is only 2 bars on the tablet, which is what it was in the same position when using the signal from the wireless router without the range extender. I've tried various settings and resets, but nothing seems to be making any difference. To confuse things even more, the control interface for the device says it's v1, but on the box it says it's v1.2! There isn't a firmware upgrade available for it as the website says they don't apply to v1 devices! I'm disappointed and a little p*ssed off to be honest as I was expecting this to solve my weak(ish) signal problem, and after 48 hours TP-Link's tech support haven't replied to my support request, which isn't impressive. The low rating is for a product which actually doesn't do what it's supposed to do (at least for me), comes with very poor instructions, has contradictory information in and on the packaging and has what appears to be poor/no support from the maker. I could well have got a faulty unit, but the lack of support from TP-Link just isn't acceptable, so unfortunately it's back to Amazon for a refund. Not impressed at all. Update: 31st July at 22h30 I finally received a reply from TP-Link support, a full 6 days after submitting my support request. They sent an email to tell me there was a reply to my support ticket on their support website, so I logged in to read it, but couldn't. After logging-in and going to the page containing the reply, trying to open the reply threw me back to the login page, where I tried logging-in again only to be told that the login details which I had successfully used 30 seconds before, were wrong! I tried this a few times with the same result and eventually reset my password, which worked fine during the login process, but when I tried again to read the support ticket reply, the same thing happened again, i.e. I was sent back to the login screen and told that my login details were wrong. Clearing cache and cookies made no difference. This is a joke, but it's academic now as I've sent the device back to Amazon and have already received my refund. TP-Link really need to get their act together as they've just lost a customer. I'm sure they'll survive losing one, but it seems I'm not the only one with issues with their products...

Fabulous. I lose WiFi either end of the house and end up using my data. Bought this gadget and set it up myself easily. I am a technophobe so am pleased with myself . I now have good WiFi in the dead spots. Very happy.

Its working nice! Easy installation!

Producto hecho para mercado Ingles con enchufe ingles y instrucciones en ingles, sin posibilidad de uso.

The WiFi extender works well and is easy to set up

The back area of the house has very poor wifi connection. Bought this and very pleased. Was very easy to set up from the app and the reception is so good at the back of the house now.

perfeito... breve comprarei outro! atendeu todas as minhas expectativas... tinha uma outra marca, mas que sempre caia a conexão... já este atende o esperado!!