The 15mm Rod Mount Universal V-Mount Battery Plate offers seven simultaneous outputs, providing the ability to power a variety of devices mounted on your camera rig. Four barrel jacks provide 15, 12, 8, and 5 VDC of power output to different rig components, while two USB output is available for charging your mobile or wireless device. A power switch is provided on the side to turn everything on or off. The 15mm rod mount is made of aluminum and secured to your rig by aluminum levers on the sides. Compatibility: Including but not limited to: Blackmagic Design Pocket Cinema Camera 4K/6K Canon 5D2, 5D3, 5D4, 6D, 6D2, 7D, 7D2, 70D, 80D, 5DSR Sony a7, 7R, a7S, a7 II, a7S II, a7R II Sony a6500, a6300, a5100, a5000, a3000 Sony NEX-5, NEX-7, DSC-RX10 Weight: 0.4kg Power Outputs: 1 x 14.8 VDC D-Tap 1 x 15 VDC Barrel 1 x 12 VDC Barrel 1 x 8 VDC Barrel 1 x 5 VDC Barrel 2 x USB port Battery Plate Type: V-Mount Accessory Mounting: 15 mm Rod Mount Dimensions(L x W): 7.4x4.1" / 190x105mm Material of Construction: Aluminum, Plastic What's in the box: 1 x Supfoto V-Lock Plates 1 x LP-E6 Dummy Battery Adapter 1 x 5.5 * 2.5mm DC to DC Spring Cable 1 * DC5.5 * 2.5mm Right Angle to DC4.0 * 1.7mm Right Angle Cable 1 * DC5.5 * 2.5mm Right Angle to DC5.5 * 2.5mm Right Angle Cable 1 * DC5.5 * 2.5mm Right Angle to DC5.5 * 2.5mm Straight Cable
| Output Current | 5 Amps |
| Output Voltage | 5 Volts |
| Power Source | Battery Powered |
| Main Power Connector Type | 3 Pin |
| Portable | No |
| Input Voltage | 5 Volts |
| Mount Type | Tabletop Mount |
| Total Usb Ports | 2 |
| Wattage | 15 watts |
| Connectivity Technology | USB |
| Connector Type Used on Cable | USB |
| Compatible Devices | Monitors |
| Compatible Phone Models | Sony |
| Item Weight | 0.4 Kilograms |
| Number of Items | 1 |
| Material | Metal |
J**H
*ALMOST* Perfect
I am so torn on this product.On the one hand, it is affordable, mostly well built (more on that later), and has a ton of connections (5, 8, 12, and 14 volt DC along with two USB ports). When I first unboxed it, I was surprised at how "not-cheap" it looked. I fully expected something plastic-y and "budget" in appearance. What you actually get is far from it. Metal, plenty of connectors, and a (mostly) solid build. "Mostly" being the key word there.Then you get to the rail mount. Oh, boy. This part of the device is *so* budget. It is very poorly designed. The screw / wingnut combo in their out-of-the-box set-up are damn near impossible to connect to a rail system. The only way to get it to mount securely is to take the screws out of the blue wing nuts and clamp the unit down with just the screws. Otherwise, your screws are too short to properly mount and therefore properly hold your battery plate and V mount battery onto your rig. The screws strip out of the holes and become impossibly difficult to install. I spent HOURS trying to get the unit to work in its out-of-the-box config but no matter what I did, I could not get the screws in the wing nuts to safely secure my unit. It's just poor design that could easily have been avoided by including screws that were 1/8" to 1/4" larger and honestly soured me on the whole product. Otherwise, this would have been a slam dunk recommendation for anyone kitting out a camera, especially if they want quality but are on a budget.
J**L
Works great. Tightening screws not long enough. Modification needed.
Works great. The tightening screws were not long enough. When I tightened them down the pressure stripped the thread. It was only hand tightened. I ended up removing the blue nuts and used an allen key to tighten. By removing the blue nuts it gave extra length to the screws and works fine now.
N**R
Screws are a bit weak
I loved the product and it’s many power options but my biggest issue was the the tightening mechanism is a fairly weak, even when they are tightened the plate still swivels almost freely, I tightened as much as I could but unfortunately the screws snapped. Haven’t been able to use it on rods but I just use Velcro now to attach it to a light stand.
J**A
Screw snapped
my biggest issue was the the tightening mechanism is a fairly weak, even when they are tightened the plate still swivels almost freely, I tightened as much as I could but unfortunately the screws snapped. Haven’t been able to use it on rods but I just use Velcro now to attach it to a light stand.
D**L
awesome service
happy with my item, thank you
Trustpilot
3 weeks ago
2 months ago
