1pcs Adjustable Kickstand 5.5"-7" Lowered Kick Stand Kit for Honda CBR250RR CBR 250R CB300F CBR300R

Similar to others, the adjustment/securing bolt fell off during a ride and the foot slid out, even after using some blue loctite on the supplied hardware. After doubling back to find it (about an hour later) it was surprisingly still intact, though obviously a bit damaged. I reinstalled it with a stronger bolt, a flat washer sandwiched between a couple different lock washers, and some red loctite. Hopefully it holds this time. This thing works great but only after modding with better hardware.On that note, I had to fabricate some shims for the frame attachment point because the opening was a tiny bit wider than my OEM kickstand. YMMV but I couldn’t deal with the sloppiness.Good luck!

Just what I needed for a lowered Kawasaki W800. The lowest setting is perfect. I had to disable the safety switch since this kickstand wasn’t made for my bike, but it mounted right up without any modification. I replaced the hardware and used Loctite to ensure I didn’t loose the foot. So far it’s holding up great, looks good and feels solid.

I loved the features: adjustability + loop protrusion for easy foot access. However, the holes came very badly threaded. I could barely get the screw into the bottom three holes if I cranked hard, and the top few holes were impossible as the threads were completely destroyed. In the pictures you can see how it's supposed to be on one end, and how the metal is all gnarly in the thread holes towards the other end.

Its wont fix on honda cb500x . Must modified the kill switch. No work.

I was actually worried that this wouldn't lower my bike enough but this was perfect. It shipped on time and it was exactly as described. I would purchase again if I ever needed to and I would buy again from this seller. Very happy with my order.