MiuzeiCase for Raspberry Pi 4, 4b, 4 8gb, 4gb, 2gb with Fan 35mm, 5V 3A Power Supply, 4 Aluminum Heatsinks, Silvery Black

Good.

Absolutely delighted with the case and the power adaptor. No issues at all in the assembly just to follow the 1 page pictorial instructions. Fan noise is minimal as I jumpered to low speed. Couldn't be happier and the price is just impossibl;e to resist buying.

This case has made an excellent addition to my desk and is a perfect match for a Raspberry Pi 4 8GB. This case is different from other cases I've seen from Miuzei. It is completely enclosed, with larger heat sinks, and mounting screws to secure the Pi board to the case.The instructions are simple, graphic, and very clear. The case comes mostly pre-assembled. The assembly is straightforward enough that many might be able to assemble it without the instructions. However, you should follow the directions as it makes the assembly more efficient. The process is basically to disassemble, add your board, add the heatsink and fan, and then reassemble. There is a film over the top to protect the translucent material and protect it in shipping.The case has plenty of ventilation without the usual large openings. This means the case does not have wide external access to the GPIO. There is a space between the case frame and the top cover which might allow you access to the GPIO depending on your configuration. This is perfect for my setup as I am experimenting with the Pi as a light desktop.The vents at the front and the top allow for good circulation over the key components. The included fan fits securely and enhances the circulation for better cooling. Fresh out of the box, the board ran at 60C under load. Installed in the case with the fan running on high (5V), the temp reduced to 35C. With the fan at low speed (3V), the temp only raised to 40C. The fan noise at 5V was noticeably higher than other Muizei cases I've used. The fans look the same, so I assume it is case design. At 5V, the fan is audible at 3 feet and sounds like a laptop fan running. At 3V and 3 feet distance, I cannot hear the fan. Also, the main heatsink is noticeably larger than those provided with other cases.The rectangular shape is attractive with the dark tinted plastic on top. The shape also means all the connectors I have fit nicely with the flush fit side. This has been an issue on other cases with inset connect ports. Access to the SD slot is sufficient below the case allowing easy swapping without disassembly.This case has a very attractive design, with easy access to ports, excellent cooling and looks good on my desktop. It is a perfect addition to my setup and supports my needs nicely.

I bought the Miuzei Case for Raspberry Pi 4 and thank you to the supplier it arrived very quickly and with good packaging. I assembled an existing Pi4 that I had and it was very easy to assemble the Pi4. I would recommend this to others who want a small form Pi 4 case.

This was my second Pi case from Miuzei and both were great products. This case in particular is very easy to put together and looks great when finished. All the connections seem secure through the sides of the case and the fan is quiet. I really like the look of this case and the workmanship and materials are better than I expected for the price.Before you finish the last step (putting the lid on) make sure you know if you want to run the fan at 3.3V or 5V because you will need to undo three screws to access it if you want to change it later. Luckily for me I picked 5V and am really happy with how quiet the case fan is and the temps I am getting are better than my last case.Pros:Comes with heat sinks, screwdriver and rubber feetInstructions include color pictures and accurate descriptionsHigh quality materials, fit and finishComes with Power Supply with On/Off functionalityExtremely lightweightWell packed for shippingCons:No access to the GPIO (can't use in conjunction with a HAT... this is normal for a basic Pi Case but noted here in case you have that question.)Can't change the fan power (3.3 or 5v) without removing top (only 3 screws.)This is a great case for your Pi. It fits my Pi 4 like a glove, I would buy another one for my next Pi Project. Buy with confidence in the company and the product, they have had great support when I needed it in the past.

Great value for the money.