💦 Elevate Your Water Experience!
The Amarine Made 0.75L Pre-Pressurized Accumulator Tank is designed for marine, RV, and caravan applications, providing a reliable water supply while extending pump life and reducing noise. Weighing only 481g, it features a 125 PSI pressure rating and a maintenance-free internal rubber membrane, making it a perfect addition to your water system.
| Manufacturer | Alfa Marine (Shanghai) Co., Ltd |
| Brand | Amarine Made |
| Package Dimensions | 21.59 x 13.89 x 12.9 cm; 481 g |
| Manufacturer reference | 01系 |
| Manufacturer part number | 01系 |
| Item Weight | 481 g |
T**T
First impression -- it does help
So this is on our boat. And that said, the boat was neglected before we bought it and I have spent a lot of time fixing what feels like everything and this was one of the first "mods" that I have done. The previous owners did not believe in filtering their water, I swear they used a bucket that had sand in it to fill the potable water...it just feels that way. So after cleaning out every part of the faucets (had to replace one of them) the pressure and volume was good --- but it pulses as the flow rates are low enough that the pump keeps up and cycles. I know how the system works and decided to put in a pressure tank. this one is small and lightweight -- made for an easy install. Once I gained access to the pump area, I cut into the line and was done in less than 2-min. Made a trial run and everything does run smoother.My goal was to make the pump cycle differently and prevent the ups and downs associated with an on demand pump system. Before it was installed the galley sink would noticeably pulse whether on full stream or sprayer. Now... it has a very slight pulse that you can see mainly because you can hear the pump at the same time. It does make the flow more even on either setting.Overall I would say I am happy with it and honestly they should install these from the factory when they built the boat.
A**B
works as it should
works as it . would be easier to install if it included the fast connectors to the pump, which I had to order seperatly.
A**R
RV Water Heater Pressure Valve Solution
My high pressure valve on my RV water heater (six gallon tank) dripped. This occurred at high temperature and a new valve did not correct the issue. The thermal expansion, blocked by the system check valves, was increasing the pressure in the system.Installed this. Charged it to incoming line pressure. The leak/drip has ended.Easy to install.Must be on the pressure (out side) of the pump.
S**G
Saves my RV pump
Prevents my RV water pump from short cycling when just using a trickle of water.
S**K
Excellent! One of the best things I've done to my RV
Couldn't be easier to install. Cut down on noise, completely stopped the hammering.
Trustpilot
1 month ago
2 weeks ago
