16-Channel 4K NVR (1080p/3MP/4MP/5MP/8MP) Ultra HD Network Video Recorder Cloud P2P Remote Access Motion Alert (No Built-in WiFi)

Was a little worried at first as they shipped the NVR in a DVR box! Removed from the box...plugged in to all bits needed--> 1TB 2.5inch HD. Connected to access point router which is connected to switch which is connected to the main router for the house (Mobile Broadband router--Huawei). Connected TV, mouse and power supply. Waited approx 30 seconds....screen showed all 3 of my cameras. NO issues at all. No messing with IP address'... More importantly ..for me...the Phone app connection. Loaded XMeye to phone, registered an account, logged in, scanned 2d barcode and the NVR and cameras were recognised. All good. System works well for recording. GUI is good/easy to use. This NVR box was literally Plug and Play. Changed the Hard Drive initially from 250Gb to 1Tb. Powered off box...changed HDD..powered on box. HDD was identified and started recording straight away. No messing with formatting etc..(like my last box). Actually, tried some of the HDD that were not working with my last NVR (HOSAFE (Aliexpress POS, to be fair it did last a few years)) and they were recognised (formatted) and began recording straight away. So far...so good.

Not tied to any particular manufacturer, this lovely little NVR only needs a proper hard drive (read the manual sent once you order, it recommends a Seagate HDD that is made for use with a CCTV system, it's not the same as a PC drive, it requires much more intensive use - 24 hour recording = constant use). Unit detected the 4 ONVIF cameras I'd already added to the wireless network, just put an RJ45 cable in to the router, and it formatted the drive, found the cameras (auto detects the protocol), and added the passwords. App easy to setup using the serial number, and I've got a standalone NVR with app' control for up to 16 generic ONVIF cameras. Will tackle port forwarding/full standalone use later. Very pleased with the little box. 😀

Had issues from the start, yes it found and loaded my ip camera's, then the issues started, 2 of the 12 cameras would not display but says their connected, the cameras that did display suddenly disapeared the re-reappeared after about 10 minutes connected the seller they did respond quickly but told be 2 of the cameras are not compatible and could not explain how to get the play back to show maximum of 4 cameras it only ever showed just 1 in the play back, then to my horror some cameras disconnected to finf they had changed there Ip address, in-all I spent hours trying to reslove, they never said some cameras my not work, jut not happy with the quality of this nvr, will never use Seculink products.

Possibly my fault in maybe not setting it up correctly, but cameras appear and disappear rather randomly.

Works perfectly with my tapo cameras, and other brands,all the features work great, I like the feature when you can have all the cameras on display and you can click on one camera and zoom, alter position at the same time. Does everything I want in a NVR. found it better than the original.

First time I've used a dedicated NVR recorder after making do with laptops and external HDD for a few years. I'd read so many poor reviews on these cheaper nvrs but so far everything has run smoothly and my 4 generic IP cams are working perfectly even the PTZ works on each cam. Got a cheap surveillance HDD for the NVR and everything worked seamlessly. Only negative so far is the mouse occasionally stops working and needs reconnecting.

Pretty basic, does the job for simple set-ups. It requires that cameras are connected directly to the same router (wired or wireless) that the NVR connects to. If WiFi cameras are futher away and need to be connected through repeaters or the network is more complex (such as involving switches, VLANs) the NVR does not find them in the network, even if all cameras and the NVR are in the same subnet. I gave 3 stars because it works with with directly connected cameras, and the customer support is responsive and tries to be helpful.

It looks cheap, it is small and looks empty - the whole circuit board is bit bigger than a business card :-) but it is working great. the menus are not super nice, most of cctv recorders have ugly menus, but the functionality is good. there is software for mac as well (M1/M2 compatible too) - again, not super beautiful but it does the job. Ive fitted the circuit board to my diy box with 10" screen together with ssd which makes me nice cctv box. ...remote control and mouse included as well

Mehr als 1 Jahr in Benutzung! Vorgestern Update bekommen. Läuft 24 Std durch seit einem Jahr. Ich habe es in einen gut durchgelüftetes Raum. Dadurch ist auch die Wärme von der Festplatte überschaubar. Es funktioniert!

Facile à configurer reconnu vite les camera

使って数年経ちますが良好です。 良い買い物が出来ました。

Alles wie beschrieben. Immer wieder.

Se utilizó para conectar cámaras con tecnología onvif de diferentes marcas y el reconocimiento muy rápido