Glarks 100 Sets Drywall Self-Drilling Anchors with Screws, Carbon Steel Hollow Wall Anchor Tapping Screw with Screws Kit, No Drill or Holes in Wall

Very easy to use , would difficult recommended it for hanging frames on drywall

Great fixings! Make it easy job. Nice and neat

Diese Dübel sind für Mietwohnungen sehr zu empfehlen, wenn es Rigipsdecken oder Wände gibt. Sie halten Bombenfest und hinterlassen nur einen kleinen Schlitz, der schnell zugespachtelt ist.

Ottimo per cartongesso

I purchased these identical hangers from Another Amazon Distributor a couple years ago. I needed more and that Distributor didn't "distribute them" anymore. Having dealt with Glarks before, I had no problem ordering these anchors from them. In short: these (type of) anchors are THE BEST for hanging "light" (i.e., under 20 lbs?) items on drywall panels. The anchors install fairly easily with a hammer, NO "pre-drilling, etc." is required, and the provided screws INSTANTLY and SECURELY go ** STRAIGHT ** into the anchor until seated. They can be installed "horizontally" or "vertically" into the drywall and once the screw is installed, they are EXTREMELY SECURE AND STABLE. Plus, you cannot "over-torque" the screw - once it "bottoms out", it won't go in the anchor any farther AND, since the anchor is made from STEEL, it won't "strip out" or break (unless, of course, you use a PNEUMATIC "IMPACT" DRIVER on the screw! ;) ). Unlike "screw-in" type anchors, they WILL NOT "insert further" into the drywall nor will they "back out" of the dry wall when the screw is removed. If you want to REMOVE the anchor, remove the screw until the "tip" threads are still engaged in the anchor, then carefully PULL the "assembly" from the wall. Unlike "screw-type" anchors, all you'll see is a 1/2"x1/16" "slit" where the anchor was. Slather a "pitifully small" amount of spackle over the "slit", let it dry, sand it down, and you'll never know there was an anchor there. If you DON'T want to remove it, just remove the screw, spackle over the anchor's head, then sand it flat when dry. As an "Extra Added Bonus", removed anchors can likely be REUSED ELSEWHERE (i.e., OOPS! I put it in the wrong place!). Just don't reinstall it within a 1-1/2" "radius" of where it was removed to ensure holding strength! Summary: if you need to Securely Hang "Non-Heavy" Things (i.e., small mirrors, paintings, small shelves, cordless tool holders) on drywall, and you don't want (unsightly?) "round holes" in the drywall from Conventional Anchors, then these are for you!

A great product that’s well worth the money. Works brilliantly on stud walls