Xipoo Seat Cover Compatible with Tesla Model Y Car Seat Cover PU Leather Car Seat Protector Replacement for 2020 2021 2022 2023 Tesla Model Y Accessories (Red-PU,Fully Wrapped 12 Pcs)

I just picked up a Model 3 with white interior, my job is being a mechanic... I had to do something quick or I'd be sure to ruin my seats. I found these and pulled the trigger, the price was right. They are a little bit of a pain to install, but I eventually found a YouTube video that made it easier. They come with no instructions, so you really do need the video. They fit well and keep my factory seats clean while looking like factory seat covers. I would definitely buy these again and I'm thinking about getting a set for the back seat.

I loved everything about these seat covers EXCEPT just a couple of gripes, but I'm not sure they could be addressed with a better product.My first gripe: It's fairly (not extremely) difficult to install these. The directions are useless, and the video is really not that great. But once you understand what you are doing, the seat covers are so well made that most people can't tell you even have seat covers on - they look like they are the original seats.My second gripe: The back seat is problematic. The back seat has 3 sections and these all have separate covers that go over them which all zip together with a zipper that is not at all sturdy. This causes a problem if you want to lower any of the seats to give you more trunk room. You can choose to unzip the sections and lower just the section or sections that you want, OR you can keep it all zipped up and lower all three sections carefully together. I think I might choose to do the latter as the zipper is not very sturdy and I'd be nervous to zip it and unzip it a bunch as I think it could easily become weakened and tear away from the seat. The problem is that if you don't lower all 3 sections all at the same time, it will put stress on the zipper and it's not very sturdy so I can see it tearing apart.I'm not sure a better thought out seat cover would have been able to solve this problem. One thing they could have done is to have made a much more sturdy and durable zipper. Another thing they could have done is to make each section wrap around the back of the seat back so that a zipper would be unnecessary altogether. This second method would be ideal, but would have added quite a bit to the complexity of installing it. My guess is that the company considered this and the trade off was to cover just the front of the seat and to then require a zipper to keep the sections on the seat back.I don't know if any of that last paragraph would make any sense to someone who has not installed these covers, but I'm sure you would understand if you had. In any event, I'm really disappointed with the durability of the zipper. I KNOW that will be a failing point in the future. It's a shame because the seat covers are otherwise exceptionally crafted and honestly amazing.

I was pretty excited when I discovered we’re are seat covers available for our Model Y. I love the option to instantly have white interior. After reading a lot of reviews and comparing against other brands (likely only one mfg in China making all of the brands) I decided to make the purchase.To cut to the chase the installation was not that smooth and took us about 5 hrs. The directions and useless and the video not much better. The rear seat was especially difficult to fit and then re fasten the bench seat. But the major issues were the fit and the velcro fasteners that are totally visible from the rear. The fit in general is off, there is 'bunching'' that we can't seem to stretch out and all of the headrest covers do not fit snugly - you can pinch the material.That aside what is really disappointing is the material in the two front seats is starting to wear down. There is visible discoloring where the back of your legs rest on the seat. I purchased these in December 2022 but didn't install them until February 2023. In less than 2 months we started to see wear and tear.I really wanted to like this product but I'm just disappointed 100%.

This product looks great on the front seat! The back seat looks a bit tacky because: 1-the zippered center piece, which I left out because I like the center down and 2-the white velcro strips look bad where it attaches to the back of the backseat-even though you don't see from the front and who looks in the trunk area, right? (Think I may try a black sharpie on the white velcro tabs to try to make them less noticeable.) I elected to leave the side bolsters off the back seat since I leave the center down feel it enhances a 2 tone look. The suppleness of this product is a bit stiff-certainly a different feel then the OEM (sorta like the Grandma who put plastic on the living room furniture that no one uses-maybe not quite that bad-but you get my drift), and hopefully it softens a bit with the heat of the sun and use. The heat seaters do take about 5 minutes to get through the fabric, not that instant heat you may be used too. The install was tough for me, referring to the video and redoing the back seat several times to get the rear seatbelts accessible and useable. A comment made by someone who did the install for me: "more like installing upholstry, not seat covers!" Some fabric wrinkles are present on back seat. The product I received had all needed assembly pieces and gloves which I didn't use and had no bad odors. Bottom LIne: The front seat I love the LOOK of the front seats, the back seat I don't love; Value for money, quality of product and Install issues relatively average or slightly below average: so over all 3 stars. Certainly changed the look of my car, which is what I wanted and the seat covers do fit like a glove - so if you do want to change it up a bit, this product will do it-if you can overlook some (minor) issues.11.18.20-Upgraded to 4 stars: Seat covers are holding up well with daily use and they have not stretched and still fit snug, yet they have softened and have gotten use to the different feel other then the one. Very happy with the seat covers.

Il sont pas superBrise facilementPas facile à laver et à installe pas super bien

I really enjoyed the fact that the material seemed to be of high quality, with padding to protect the actual seats. I also liked all of the attachment points that reliably secured the seat covers when installed.What I wasn’t prepared for was how much of a workout it was to get the seat covers on, which I understand because it is supposed to fit snugly to ensure a quality appearance. Had I not been provided an instructional video, I would have given up, but 3 hours later, they’re installed and look great! There is a little bit of creasing from transportation, but it was sent to me in the largest box possible to minimize this issue, which I appreciate.

Looks greats. Installing wasn't too hard if you follow the installation video. I didn't use every piece of the the set I got. Didn't want all red interior. Most important it FIT *2021* model 3.

As soon as I opened the box I could tell that this junk was USED. All the car seat covers had stains and black scratch marks. A few marks would’ve been acceptable but I paid $376 for a NEW product not some old, used, lousy junk. I wouldn’t recommend buying this. There’s a risk that you will get someone’s USED stuff. Really disappointed and already working on refunding this.

I am simply amazed by the quality of the product as well as customer service.I received the product and it took me approx 1.5 hours to install. The video clearly demonstrate what needs to be done, but it might be useful to others to have more elaborate video.The zipper on the back seat had a minor damaged and once contacted the seller, he immediately sent me a replacement. Over all great experience and highly recommended!