Official Ender 3 V2 Heated Bed 3D Printer Replacement Hot Bed 220W 24V with Cable Compatible for Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo...

What else is there to say? Damage the heating element for whatever reason? This will fix ya for an Ender3 V2.

Purchased to replace our beat up bed on an Ender 3 V2. Exact match to the one we had. The easy to remove rating refers not to the bed (it is the glass or metal cover of the bed that would apply to anyway), but the fact that replacing anything on and Ender printer that attaches to the motherboard is not the easiest thing to do. No real issues, just a bit time consuming.I would recommend updating the springs and screws as well. The stock leveling springs and wheels are a but weak when it comes to holding level.

The stock ender 3 v2 beds are warped 9 times out of 10. I absolutely could not verify this until I replaced mine. Also, the stock plastic mount piece originally was trash. This one the plastic feels the same but it's way more rigid; I dunno how to describe it best.I mounted this on my printer, reset my z axis and all that jazz, the wiring was super easy you just swap black for black red for red, and replace the 3pin wire - easy peasy.This was a much needed 'upgrade' or 'replacement'. I already see the quality improvement on my prints.

Over all, its a decent replacement bed - but sadly, not as flat as the stock version. On this version, the back left part of the bed shows a slight lift compared to the rest of the bed. But over all, the rest of the bed is level enough to use.

Immediately fixed why I was having trouble calibrating the bed. I ruled out every possible cause first before buying this. I think what happened was after I changed out the glass build plate with a magnetic sticker, I came to realize that my print bed was warped from the very start from when I purchased it. I could not find the warranty since I think I threw it away but I rather waste time fixing the issue then trying to find what could help me fix the issue.I recommend anyone with an ender 3 v2 printer that is having calibration issues to check for warpage in the print bed since this issue can waste a lot of time if not solved correctly.P.S. If your connectors are hot glued you can use 99% alcohol to easily remove the glue from the connectors.

Replaced my heat bed at some of my cables on the old one got damaged. It was really simple to swap them out.

It's precisely what it should be, simple installation, back up and printing.

Bought some clips to secure the bed. They were awesome!Put them on last weekend and sparks flew, luckily nothing was damaged. On inspection the clips scratched the bed and exposed the copper elements. Decided to just replace the entire thing and move on. It works great!!!$20 whoopsie!